From: frank.blaschka@de.ibm.com
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-s390@vger.kernel.org,
Heiko Carstens <heiko.carstens@de.ibm.com>
Subject: [patch 4/9] [PATCH] claw: remove unused return code handling
Date: Tue, 10 May 2011 13:50:17 +0200 [thread overview]
Message-ID: <20110510115047.438794162@de.ibm.com> (raw)
In-Reply-To: 20110510115013.363974020@de.ibm.com
[-- Attachment #1: 603-claw-unused-rc.diff --]
[-- Type: text/plain, Size: 3800 bytes --]
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Remove unused return code handling. The claw driver is mostly dead, so
just make sure it keeps compiling without warnings.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---
drivers/s390/net/claw.c | 22 +++-------------------
1 file changed, 3 insertions(+), 19 deletions(-)
diff -urpN linux-2.6/drivers/s390/net/claw.c linux-2.6-patched/drivers/s390/net/claw.c
--- linux-2.6/drivers/s390/net/claw.c 2011-05-10 09:14:06.000000000 +0200
+++ linux-2.6-patched/drivers/s390/net/claw.c 2011-05-10 09:14:25.000000000 +0200
@@ -845,12 +845,10 @@ claw_irq_tasklet ( unsigned long data )
{
struct chbk * p_ch;
struct net_device *dev;
- struct claw_privbk * privptr;
p_ch = (struct chbk *) data;
dev = (struct net_device *)p_ch->ndev;
CLAW_DBF_TEXT(4, trace, "IRQtask");
- privptr = (struct claw_privbk *)dev->ml_priv;
unpack_read(dev);
clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
CLAW_DBF_TEXT(4, trace, "TskletXt");
@@ -1026,7 +1024,6 @@ claw_write_next ( struct chbk * p_ch )
struct net_device *dev;
struct claw_privbk *privptr=NULL;
struct sk_buff *pk_skb;
- int rc;
CLAW_DBF_TEXT(4, trace, "claw_wrt");
if (p_ch->claw_state == CLAW_STOP)
@@ -1038,7 +1035,7 @@ claw_write_next ( struct chbk * p_ch )
!skb_queue_empty(&p_ch->collect_queue)) {
pk_skb = claw_pack_skb(privptr);
while (pk_skb != NULL) {
- rc = claw_hw_tx( pk_skb, dev,1);
+ claw_hw_tx(pk_skb, dev, 1);
if (privptr->write_free_count > 0) {
pk_skb = claw_pack_skb(privptr);
} else
@@ -1322,15 +1319,12 @@ claw_hw_tx(struct sk_buff *skb, struct n
unsigned char *pDataAddress;
struct endccw *pEnd;
struct ccw1 tempCCW;
- struct chbk *p_ch;
struct claw_env *p_env;
- int lock;
struct clawph *pk_head;
struct chbk *ch;
CLAW_DBF_TEXT(4, trace, "hw_tx");
privptr = (struct claw_privbk *)(dev->ml_priv);
- p_ch = (struct chbk *)&privptr->channel[WRITE_CHANNEL];
p_env =privptr->p_env;
claw_free_wrt_buf(dev); /* Clean up free chain if posible */
/* scan the write queue to free any completed write packets */
@@ -1511,12 +1505,6 @@ claw_hw_tx(struct sk_buff *skb, struct n
} /* endif (p_first_ccw!=NULL) */
dev_kfree_skb_any(skb);
- if (linkid==0) {
- lock=LOCK_NO;
- }
- else {
- lock=LOCK_YES;
- }
claw_strt_out_IO(dev );
/* if write free count is zero , set NOBUFFER */
if (privptr->write_free_count==0) {
@@ -2821,15 +2809,11 @@ claw_free_wrt_buf( struct net_device *de
{
struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
- struct ccwbk*p_first_ccw;
- struct ccwbk*p_last_ccw;
struct ccwbk*p_this_ccw;
struct ccwbk*p_next_ccw;
CLAW_DBF_TEXT(4, trace, "freewrtb");
/* scan the write queue to free any completed write packets */
- p_first_ccw=NULL;
- p_last_ccw=NULL;
p_this_ccw=privptr->p_write_active_first;
while ( (p_this_ccw!=NULL) && (p_this_ccw->header.flag!=CLAW_PENDING))
{
@@ -3072,7 +3056,7 @@ claw_shutdown_device(struct ccwgroup_dev
{
struct claw_privbk *priv;
struct net_device *ndev;
- int ret;
+ int ret = 0;
CLAW_DBF_TEXT_(2, setup, "%s", dev_name(&cgdev->dev));
priv = dev_get_drvdata(&cgdev->dev);
@@ -3095,7 +3079,7 @@ claw_shutdown_device(struct ccwgroup_dev
}
ccw_device_set_offline(cgdev->cdev[1]);
ccw_device_set_offline(cgdev->cdev[0]);
- return 0;
+ return ret;
}
static void
next prev parent reply other threads:[~2011-05-10 11:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-10 11:50 [patch 0/9] s390: network feature patches for net-next frank.blaschka
2011-05-10 11:50 ` [patch 1/9] [PATCH] qeth: convert to hw_features part 2 frank.blaschka
2011-05-10 13:19 ` Michał Mirosław
2011-05-10 14:09 ` Frank Blaschka
2011-05-10 14:33 ` Michał Mirosław
2011-05-10 11:50 ` [patch 2/9] [PATCH] qeth: add OSA concurrent hardware trap frank.blaschka
2011-05-10 11:50 ` [patch 3/9] [PATCH] qeth: add owner to ccw driver frank.blaschka
2011-05-10 11:50 ` frank.blaschka [this message]
2011-05-10 11:50 ` [patch 5/9] [PATCH] lcs: get rid of compile warning frank.blaschka
2011-05-10 11:50 ` [patch 6/9] [PATCH] ctcm: " frank.blaschka
2011-05-10 11:50 ` [patch 7/9] [PATCH] iucv: " frank.blaschka
2011-05-10 11:50 ` [patch 8/9] [PATCH] af_iucv: " frank.blaschka
2011-05-10 11:50 ` [patch 9/9] [PATCH] convert old cpumask API into new one frank.blaschka
-- strict thread matches above, loose matches on Subject: below --
2011-05-12 5:43 [patch 0/9] [resend] s390: network feature patches for net-next frank.blaschka
2011-05-12 5:43 ` [patch 4/9] [PATCH] claw: remove unused return code handling frank.blaschka
2011-05-13 4:45 [patch 0/9] [resend v2] s390: network feature patches for net-next frank.blaschka
2011-05-13 4:45 ` [patch 4/9] [PATCH] claw: remove unused return code handling frank.blaschka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110510115047.438794162@de.ibm.com \
--to=frank.blaschka@de.ibm.com \
--cc=davem@davemloft.net \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-s390@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.