All of lore.kernel.org
 help / color / mirror / Atom feed
From: "John W. Linville" <linville@tuxdriver.com>
To: Matteo Croce <matteo@openwrt.org>
Cc: linux-wireless@vger.kernel.org
Subject: Re: [PATCH v2] 802.11n frame injection
Date: Wed, 11 May 2011 12:49:21 -0400	[thread overview]
Message-ID: <20110511164920.GD2490@tuxdriver.com> (raw)
In-Reply-To: <BANLkTikBEs7aWZR+UovtpwYVPJfZjHEhgw@mail.gmail.com>

  CC [M]  net/mac80211/tx.o
net/mac80211/tx.c: In function ‘__ieee80211_parse_tx_radiotap’:
net/mac80211/tx.c:1095:21: error: ‘sband’ undeclared (first use in this function)
net/mac80211/tx.c:1095:21: note: each undeclared identifier is reported only once for each function it appears in

Also, please add "mac80211:" as a prefix in the subject, and correct
the commit message to not reference received frames.

On Fri, Apr 22, 2011 at 06:34:59PM +0200, Matteo Croce wrote:
> This patch allows to set the tx rate and retries when injecting,
> and report correct MCS information on received frames.
> This v2 version sets IEEE80211_TX_STATUS_HEADROOM to a correct value
> 
> Signed-off-by: Matteo Croce <matteo@openwrt.org>
> 
> --- a/net/mac80211/tx.c	2011-04-22 11:34:08.825135198 +0200
> +++ b/net/mac80211/tx.c	2011-04-22 11:34:54.037135187 +0200
> @@ -1091,6 +1091,44 @@
>  				tx->flags |= IEEE80211_TX_FRAGMENTED;
>  			break;
> 
> +		case IEEE80211_RADIOTAP_RATE: {
> +			info->control.rates[0].idx = 0;
> +			if (*iterator.this_arg) {
> +				int i;
> +				for (i = 0; i < sband->n_bitrates; i++)
> +					if (sband->bitrates[i].bitrate ==
> +						*iterator.this_arg * 5) {
> +						info->control.rates[0].idx = i;
> +						break;
> +					}
> +			}
> +			info->control.rates[0].flags = 0;
> +			info->control.rates[1].idx = -1;
> +			info->control.rates[2].idx = -1;
> +			info->control.rates[3].idx = -1;
> +			info->control.rates[4].idx = -1;
> +			break;
> +		}
> +
> +		case IEEE80211_RADIOTAP_DATA_RETRIES:
> +			info->control.rates[0].count = *iterator.this_arg;
> +			break;
> +
> +		case IEEE80211_RADIOTAP_MCS: {
> +			u8 flags = iterator.this_arg[1];
> +			u8 mcs = iterator.this_arg[2];
> +			info->control.rates[0].idx = mcs;
> +			info->control.rates[0].flags |=
> +				IEEE80211_TX_RC_MCS;
> +			if (flags & IEEE80211_RADIOTAP_MCS_BW_40)
> +				info->control.rates[0].flags |=
> +				IEEE80211_TX_RC_40_MHZ_WIDTH;
> +			if (flags & IEEE80211_RADIOTAP_MCS_SGI)
> +				info->control.rates[0].flags |=
> +				IEEE80211_TX_RC_SHORT_GI;
> +			break;
> +		}
> +
>  		/*
>  		 * Please update the file
>  		 * Documentation/networking/mac80211-injection.txt
> --- a/net/mac80211/ieee80211_i.h	2011-04-22 11:34:08.829135198 +0200
> +++ b/net/mac80211/ieee80211_i.h	2011-04-22 11:34:54.037135187 +0200
> @@ -1197,6 +1197,10 @@
>  	u8 padding_for_rate;
>  	__le16 tx_flags;
>  	u8 data_retries;
> +	/*HT info*/
> +	u8 ht_known;
> +	u8 ht_flag;
> +	u8 ht_mcs;
>  } __packed;
> 
> 
> --- a/net/mac80211/status.c	2011-04-22 11:34:08.833135198 +0200
> +++ b/net/mac80211/status.c	2011-04-22 11:34:54.037135187 +0200
> @@ -405,6 +405,19 @@
>  	    !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
>  		rthdr->rate = sband->bitrates[
>  				info->status.rates[0].idx].bitrate / 5;
> +	/* HT rates */
> +	if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
> +		rthdr->hdr.it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_MCS);
> +		rthdr->rate = 0;
> +		rthdr->ht_known =	IEEE80211_RADIOTAP_MCS_HAVE_BW |
> +					IEEE80211_RADIOTAP_MCS_HAVE_MCS |
> +					IEEE80211_RADIOTAP_MCS_HAVE_GI;
> +		rthdr->ht_mcs = info->status.rates[0].idx;
> +		if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
> +			rthdr->ht_flag |= IEEE80211_RADIOTAP_MCS_BW_40;
> +		if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI)
> +			rthdr->ht_flag |= IEEE80211_RADIOTAP_MCS_SGI;
> +	}
> 
>  	/* for now report the total retry_count */
>  	rthdr->data_retries = retry_count;
> --- a/net/wireless/radiotap.c	2011-04-22 11:34:08.833135198 +0200
> +++ b/net/wireless/radiotap.c	2011-04-22 11:34:54.037135187 +0200
> @@ -40,6 +40,7 @@
>  	[IEEE80211_RADIOTAP_TX_FLAGS] = { .align = 2, .size = 2, },
>  	[IEEE80211_RADIOTAP_RTS_RETRIES] = { .align = 1, .size = 1, },
>  	[IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, },
> +	[IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, },
>  	/*
>  	 * add more here as they are defined in radiotap.h
>  	 */
> --- a/include/net/mac80211.h	2011-04-22 11:38:01.389135142 +0200
> +++ b/include/net/mac80211.h	2011-04-22 11:40:22.017135111 +0200
> @@ -2228,7 +2228,7 @@
>   * The TX headroom reserved by mac80211 for its own tx_status functions.
>   * This is enough for the radiotap header.
>   */
> -#define IEEE80211_TX_STATUS_HEADROOM	13
> +#define IEEE80211_TX_STATUS_HEADROOM	16
> 
>  /**
>   * ieee80211_sta_set_tim - set the TIM bit for a sleeping station
> 

-- 
John W. Linville		Someday the world will need a hero, and you
linville@tuxdriver.com			might be all we have.  Be ready.

  parent reply	other threads:[~2011-05-11 17:00 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-22 16:34 [PATCH v2] 802.11n frame injection Matteo Croce
2011-04-24  8:15 ` Johannes Berg
2011-04-24 19:14   ` Maxim Levitsky
2011-04-24 20:42     ` Matteo Croce
2011-05-11 16:49 ` John W. Linville [this message]
2011-05-11 17:06 ` Johannes Berg
2011-05-14 22:07   ` Matteo Croce
2011-05-18 22:49     ` Johannes Berg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110511164920.GD2490@tuxdriver.com \
    --to=linville@tuxdriver.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=matteo@openwrt.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.