From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [IXP42x PATCH series v4 06/17] support CONFIG_SYS_LDSCRIPT on ARM
Date: Sun, 22 May 2011 17:33:18 +0200 [thread overview]
Message-ID: <201105221733.18909.marek.vasut@gmail.com> (raw)
In-Reply-To: <1302126558-1318-7-git-send-email-michael@schwingen.org>
On Wednesday, April 06, 2011 11:49:07 PM Michael Schwingen wrote:
> Signed-off-by: Michael Schwingen <michael@schwingen.org>
> ---
> Changes for V3:
> - new in V3, replaces config.mk files in earlier patches
> Changes for V4:
> - add changelog
>
> arch/arm/config.mk | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/config.mk b/arch/arm/config.mk
> index a6a4742..a7c4d27 100644
> --- a/arch/arm/config.mk
> +++ b/arch/arm/config.mk
> @@ -63,7 +63,13 @@ ifeq (,$(findstring
> arch/arm/lib/eabi_compat.o,$(PLATFORM_LIBS))) PLATFORM_LIBS +=
> $(OBJTREE)/arch/arm/lib/eabi_compat.o
> endif
> endif
> +
> +ifdef CONFIG_SYS_LDSCRIPT
> +# need to strip off double quotes
> +LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
> +else
> LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
> +endif
>
> # needed for relocation
> ifndef CONFIG_NAND_SPL
Hi, this one doesn't apply for me ...
next prev parent reply other threads:[~2011-05-22 15:33 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-06 21:49 [U-Boot] [IXP42x PATCH series v4 00/17] Overview Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 01/17] add XScale sub architecture (IXP/PXA) to maintainer list Michael Schwingen
2011-05-20 23:53 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 02/17] add support for IXP42x Rev. B1 and newer Michael Schwingen
2011-05-20 23:53 ` Marek Vasut
2011-05-21 18:31 ` Wolfgang Denk
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 03/17] trigger hardware watchdog in IXP42x serial driver Michael Schwingen
2011-05-20 23:54 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 04/17] Fix IXP code to work after relocation was added Michael Schwingen
2011-05-20 23:58 ` Marek Vasut
2011-05-22 19:15 ` Michael Schwingen
2011-05-23 0:38 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 05/17] fix "depend" target in npe directory Michael Schwingen
2011-05-20 23:59 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 06/17] support CONFIG_SYS_LDSCRIPT on ARM Michael Schwingen
2011-05-22 15:33 ` Marek Vasut [this message]
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 07/17] use -ffunction-sections / --gc-sections on IXP42x Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 08/17] update/fix AcTux1 board Michael Schwingen
2011-05-21 0:03 ` Marek Vasut
2011-05-22 15:36 ` Marek Vasut
2011-05-22 21:53 ` Michael Schwingen
2011-05-22 19:51 ` Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 09/17] update/fix AcTux2 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 10/17] update/fix AcTux3 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 11/17] update/fix AcTux4 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 12/17] IXP NPE: add support for fixed-speed MII ports Michael Schwingen
2011-05-21 0:05 ` Marek Vasut
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 13/17] add dvlhost (dLAN 200 AV Wireless G) board Michael Schwingen
2011-05-21 0:06 ` Marek Vasut
2011-05-22 20:53 ` Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 14/17] update/fix IXDP425 / IXDPG425 boards Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 15/17] update/fix PDNB3 board Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 16/17] IXP42x PCI rewrite Michael Schwingen
2011-04-06 21:49 ` [U-Boot] [IXP42x PATCH series v4 17/17] run arm_pci_init after relocation Michael Schwingen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201105221733.18909.marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.