All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org
Subject: [GIT PULL] omap updates for 2.6.40
Date: Thu, 26 May 2011 04:39:06 -0700	[thread overview]
Message-ID: <20110526113905.GG27250@atomide.com> (raw)

Hi Linus,

Please pull omap updates for this merge window from:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus

This contains clean-up to shrink down omap specific code a bit. Also included
are some fixes. But basically no new code at this point.

Regards,

Tony


Aaro Koskinen (5):
      OMAP3+: smartreflex: fix sr_late_init() error path in probe
      OMAP3+: smartreflex: request the memory region
      OMAP3+: smartreflex: fix ioremap leak on probe error
      OMAP3+: smartreflex: delete instance from sr_list on probe error
      OMAP3+: smartreflex: delete debugfs entries on probe error

Felipe Balbi (1):
      usb: musb: am35x: fix compile error when building am35x

Hema HK (3):
      usb: musb: OMAP4430: Power down the PHY during board init
      usb: otg: OMAP4430: Fixing the omap4430_phy_init function
      usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled

Igor Grinberg (2):
      arm: omap: gpmc-smsc911x: minor style fixes
      arm: omap2plus: GPIO cleanup

Jean Pihet (5):
      OMAP3 cpuidle: remove useless SDP specific timings
      OMAP3: clean-up mach specific cpuidle data structures
      OMAP3: cpuidle: re-organize the C-states data
      OMAP3: cpuidle: code rework for improved readability
      OMAP3: cpuidle: change the power domains modes determination logic

Mike Rapoport (10):
      omap: gpmc-smsc911x: always set irq flags to IORESOURCE_IRQ_LOWLEVEL
      omap: convert boards that use SMSC911x to use gpmc-smsc911x
      omap: consolidate touch screen initialization among different boards
      omap: use common initialization for PMIC i2c bus
      omap: move detection of NAND CS to common-board-devices
      omap: musb: introduce default board config
      omap: igep0020: name refactoring for future merge with IGEP3
      omap: igep0020: minor refactoring
      omap: igep0020: add support for IGEP3
      omap: drop board-igep0030.c

Nishanth Menon (2):
      OMAP4: PM: remove redundant #ifdef CONFIG_PM
      OMAP3+: voltage: remove spurious pr_notice for debugfs

Sanjeev Premi (1):
      OMAP3: PM: Boot message is not an error, and not helpful, remove it

Tony Lindgren (5):
      omap: Run make savedefconfig on omap2plus_defconfig to shrink it
      omap: Remove support for omap2evm
      Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next
      Merge branch 'for-tony' of master.kernel.org:/.../balbi/usb into omap-for-linus
      Merge branch 'for_2.6.40/pm-cleanup' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus

omar ramirez (2):
      OMAP3/4: l3: fix omap3_l3_probe error path
      OMAP3/4: l3: minor cleanup for parenthesis and extra spaces

 arch/arm/configs/omap2plus_defconfig            |   83 +----
 arch/arm/mach-omap2/Kconfig                     |    1 +
 arch/arm/mach-omap2/Makefile                    |    4 +-
 arch/arm/mach-omap2/board-2430sdp.c             |   27 +--
 arch/arm/mach-omap2/board-3430sdp.c             |  151 ++-------
 arch/arm/mach-omap2/board-4430sdp.c             |  114 ++-----
 arch/arm/mach-omap2/board-am3517crane.c         |   10 +-
 arch/arm/mach-omap2/board-am3517evm.c           |   56 +--
 arch/arm/mach-omap2/board-apollon.c             |   29 +-
 arch/arm/mach-omap2/board-cm-t35.c              |  236 ++----------
 arch/arm/mach-omap2/board-cm-t3517.c            |    9 +-
 arch/arm/mach-omap2/board-devkit8000.c          |  131 +------
 arch/arm/mach-omap2/board-igep0020.c            |  449 +++++++++++-----------
 arch/arm/mach-omap2/board-igep0030.c            |  458 -----------------------
 arch/arm/mach-omap2/board-ldp.c                 |  138 +-------
 arch/arm/mach-omap2/board-n8x0.c                |   28 +-
 arch/arm/mach-omap2/board-omap3beagle.c         |  194 +++-------
 arch/arm/mach-omap2/board-omap3evm.c            |  242 +++----------
 arch/arm/mach-omap2/board-omap3logic.c          |   14 +-
 arch/arm/mach-omap2/board-omap3pandora.c        |   90 +----
 arch/arm/mach-omap2/board-omap3stalker.c        |  133 +------
 arch/arm/mach-omap2/board-omap3touchbook.c      |  121 +------
 arch/arm/mach-omap2/board-omap4panda.c          |   79 ++---
 arch/arm/mach-omap2/board-overo.c               |  265 +++-----------
 arch/arm/mach-omap2/board-rm680.c               |   21 +-
 arch/arm/mach-omap2/board-rx51-peripherals.c    |   42 +--
 arch/arm/mach-omap2/board-rx51-video.c          |    5 +-
 arch/arm/mach-omap2/board-rx51.c                |   18 +-
 arch/arm/mach-omap2/board-zoom-debugboard.c     |   65 +---
 arch/arm/mach-omap2/board-zoom-display.c        |   31 +--
 arch/arm/mach-omap2/board-zoom-peripherals.c    |   29 +--
 arch/arm/mach-omap2/common-board-devices.c      |  163 ++++++++
 arch/arm/mach-omap2/common-board-devices.h      |   35 ++
 arch/arm/mach-omap2/cpuidle34xx.c               |  436 +++++++--------------
 arch/arm/mach-omap2/gpmc-smc91x.c               |   11 +-
 arch/arm/mach-omap2/gpmc-smsc911x.c             |   44 +--
 arch/arm/mach-omap2/omap_l3_noc.c               |   51 ++--
 arch/arm/mach-omap2/omap_l3_smx.c               |   42 +--
 arch/arm/mach-omap2/omap_phy_internal.c         |    9 +-
 arch/arm/mach-omap2/pm.h                        |   17 +-
 arch/arm/mach-omap2/pm34xx.c                    |   14 -
 arch/arm/mach-omap2/pm44xx.c                    |    2 -
 arch/arm/mach-omap2/smartreflex.c               |   23 +-
 arch/arm/mach-omap2/usb-musb.c                  |   22 +-
 arch/arm/mach-omap2/usb-tusb6010.c              |    3 +-
 arch/arm/mach-omap2/voltage.c                   |    1 -
 arch/arm/plat-omap/include/plat/gpmc-smsc911x.h |    4 +-
 arch/arm/plat-omap/include/plat/uncompress.h    |    1 -
 arch/arm/plat-omap/include/plat/usb.h           |    2 +-
 drivers/video/omap/Makefile                     |    1 -
 drivers/video/omap/lcd_omap2evm.c               |  192 ----------
 sound/soc/omap/Kconfig                          |    8 -
 sound/soc/omap/Makefile                         |    1 -
 sound/soc/omap/omap2evm.c                       |  139 -------
 54 files changed, 1110 insertions(+), 3384 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-igep0030.c
 create mode 100644 arch/arm/mach-omap2/common-board-devices.c
 create mode 100644 arch/arm/mach-omap2/common-board-devices.h
 delete mode 100644 drivers/video/omap/lcd_omap2evm.c
 delete mode 100644 sound/soc/omap/omap2evm.c

WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] omap updates for 2.6.40
Date: Thu, 26 May 2011 04:39:06 -0700	[thread overview]
Message-ID: <20110526113905.GG27250@atomide.com> (raw)

Hi Linus,

Please pull omap updates for this merge window from:

git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap-for-linus

This contains clean-up to shrink down omap specific code a bit. Also included
are some fixes. But basically no new code at this point.

Regards,

Tony


Aaro Koskinen (5):
      OMAP3+: smartreflex: fix sr_late_init() error path in probe
      OMAP3+: smartreflex: request the memory region
      OMAP3+: smartreflex: fix ioremap leak on probe error
      OMAP3+: smartreflex: delete instance from sr_list on probe error
      OMAP3+: smartreflex: delete debugfs entries on probe error

Felipe Balbi (1):
      usb: musb: am35x: fix compile error when building am35x

Hema HK (3):
      usb: musb: OMAP4430: Power down the PHY during board init
      usb: otg: OMAP4430: Fixing the omap4430_phy_init function
      usb: otg: OMAP4430: Powerdown the internal PHY when USB is disabled

Igor Grinberg (2):
      arm: omap: gpmc-smsc911x: minor style fixes
      arm: omap2plus: GPIO cleanup

Jean Pihet (5):
      OMAP3 cpuidle: remove useless SDP specific timings
      OMAP3: clean-up mach specific cpuidle data structures
      OMAP3: cpuidle: re-organize the C-states data
      OMAP3: cpuidle: code rework for improved readability
      OMAP3: cpuidle: change the power domains modes determination logic

Mike Rapoport (10):
      omap: gpmc-smsc911x: always set irq flags to IORESOURCE_IRQ_LOWLEVEL
      omap: convert boards that use SMSC911x to use gpmc-smsc911x
      omap: consolidate touch screen initialization among different boards
      omap: use common initialization for PMIC i2c bus
      omap: move detection of NAND CS to common-board-devices
      omap: musb: introduce default board config
      omap: igep0020: name refactoring for future merge with IGEP3
      omap: igep0020: minor refactoring
      omap: igep0020: add support for IGEP3
      omap: drop board-igep0030.c

Nishanth Menon (2):
      OMAP4: PM: remove redundant #ifdef CONFIG_PM
      OMAP3+: voltage: remove spurious pr_notice for debugfs

Sanjeev Premi (1):
      OMAP3: PM: Boot message is not an error, and not helpful, remove it

Tony Lindgren (5):
      omap: Run make savedefconfig on omap2plus_defconfig to shrink it
      omap: Remove support for omap2evm
      Merge branches 'devel-fixes', 'devel-cleanup' and 'devel-genirq' into for-next
      Merge branch 'for-tony' of master.kernel.org:/.../balbi/usb into omap-for-linus
      Merge branch 'for_2.6.40/pm-cleanup' of ssh://master.kernel.org/.../khilman/linux-omap-pm into omap-for-linus

omar ramirez (2):
      OMAP3/4: l3: fix omap3_l3_probe error path
      OMAP3/4: l3: minor cleanup for parenthesis and extra spaces

 arch/arm/configs/omap2plus_defconfig            |   83 +----
 arch/arm/mach-omap2/Kconfig                     |    1 +
 arch/arm/mach-omap2/Makefile                    |    4 +-
 arch/arm/mach-omap2/board-2430sdp.c             |   27 +--
 arch/arm/mach-omap2/board-3430sdp.c             |  151 ++-------
 arch/arm/mach-omap2/board-4430sdp.c             |  114 ++-----
 arch/arm/mach-omap2/board-am3517crane.c         |   10 +-
 arch/arm/mach-omap2/board-am3517evm.c           |   56 +--
 arch/arm/mach-omap2/board-apollon.c             |   29 +-
 arch/arm/mach-omap2/board-cm-t35.c              |  236 ++----------
 arch/arm/mach-omap2/board-cm-t3517.c            |    9 +-
 arch/arm/mach-omap2/board-devkit8000.c          |  131 +------
 arch/arm/mach-omap2/board-igep0020.c            |  449 +++++++++++-----------
 arch/arm/mach-omap2/board-igep0030.c            |  458 -----------------------
 arch/arm/mach-omap2/board-ldp.c                 |  138 +-------
 arch/arm/mach-omap2/board-n8x0.c                |   28 +-
 arch/arm/mach-omap2/board-omap3beagle.c         |  194 +++-------
 arch/arm/mach-omap2/board-omap3evm.c            |  242 +++----------
 arch/arm/mach-omap2/board-omap3logic.c          |   14 +-
 arch/arm/mach-omap2/board-omap3pandora.c        |   90 +----
 arch/arm/mach-omap2/board-omap3stalker.c        |  133 +------
 arch/arm/mach-omap2/board-omap3touchbook.c      |  121 +------
 arch/arm/mach-omap2/board-omap4panda.c          |   79 ++---
 arch/arm/mach-omap2/board-overo.c               |  265 +++-----------
 arch/arm/mach-omap2/board-rm680.c               |   21 +-
 arch/arm/mach-omap2/board-rx51-peripherals.c    |   42 +--
 arch/arm/mach-omap2/board-rx51-video.c          |    5 +-
 arch/arm/mach-omap2/board-rx51.c                |   18 +-
 arch/arm/mach-omap2/board-zoom-debugboard.c     |   65 +---
 arch/arm/mach-omap2/board-zoom-display.c        |   31 +--
 arch/arm/mach-omap2/board-zoom-peripherals.c    |   29 +--
 arch/arm/mach-omap2/common-board-devices.c      |  163 ++++++++
 arch/arm/mach-omap2/common-board-devices.h      |   35 ++
 arch/arm/mach-omap2/cpuidle34xx.c               |  436 +++++++--------------
 arch/arm/mach-omap2/gpmc-smc91x.c               |   11 +-
 arch/arm/mach-omap2/gpmc-smsc911x.c             |   44 +--
 arch/arm/mach-omap2/omap_l3_noc.c               |   51 ++--
 arch/arm/mach-omap2/omap_l3_smx.c               |   42 +--
 arch/arm/mach-omap2/omap_phy_internal.c         |    9 +-
 arch/arm/mach-omap2/pm.h                        |   17 +-
 arch/arm/mach-omap2/pm34xx.c                    |   14 -
 arch/arm/mach-omap2/pm44xx.c                    |    2 -
 arch/arm/mach-omap2/smartreflex.c               |   23 +-
 arch/arm/mach-omap2/usb-musb.c                  |   22 +-
 arch/arm/mach-omap2/usb-tusb6010.c              |    3 +-
 arch/arm/mach-omap2/voltage.c                   |    1 -
 arch/arm/plat-omap/include/plat/gpmc-smsc911x.h |    4 +-
 arch/arm/plat-omap/include/plat/uncompress.h    |    1 -
 arch/arm/plat-omap/include/plat/usb.h           |    2 +-
 drivers/video/omap/Makefile                     |    1 -
 drivers/video/omap/lcd_omap2evm.c               |  192 ----------
 sound/soc/omap/Kconfig                          |    8 -
 sound/soc/omap/Makefile                         |    1 -
 sound/soc/omap/omap2evm.c                       |  139 -------
 54 files changed, 1110 insertions(+), 3384 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-igep0030.c
 create mode 100644 arch/arm/mach-omap2/common-board-devices.c
 create mode 100644 arch/arm/mach-omap2/common-board-devices.h
 delete mode 100644 drivers/video/omap/lcd_omap2evm.c
 delete mode 100644 sound/soc/omap/omap2evm.c

             reply	other threads:[~2011-05-26 11:39 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-26 11:39 Tony Lindgren [this message]
2011-05-26 11:39 ` [GIT PULL] omap updates for 2.6.40 Tony Lindgren
2011-05-26 12:14 ` Igor Grinberg
2011-05-26 12:14   ` Igor Grinberg
2011-05-26 12:24   ` Tony Lindgren
2011-05-26 12:24     ` Tony Lindgren
2011-05-26 12:52     ` Igor Grinberg
2011-05-26 12:52       ` Igor Grinberg
2011-05-26 12:55       ` Tony Lindgren
2011-05-26 12:55         ` Tony Lindgren
2011-05-26 16:06 ` Koen Kooi
2011-05-26 16:06   ` Koen Kooi
2011-05-27  6:33   ` Tony Lindgren
2011-05-27  6:33     ` Tony Lindgren
2011-05-27 11:04     ` Tony Lindgren
2011-05-27 11:04       ` Tony Lindgren
2011-05-27 12:22       ` Koen Kooi
2011-05-27 12:22         ` Koen Kooi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110526113905.GG27250@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.