From: Todd Poynor <toddpoynor@google.com>
To: Kevin Hilman <khilman@ti.com>, linux-omap@vger.kernel.org
Subject: [PATCH pm_wip/voltdm_nm] ARM: OMAP: Explicitly mask VPVOLTAGE field
Date: Thu, 26 May 2011 20:03:46 -0700 [thread overview]
Message-ID: <20110527030346.GA2720@google.com> (raw)
Reading the VPVOLTAGE field of PRM_VP_*_VOLTAGE registers currently
relies on a u32 -> u8 conversion to mask off the FORCEUPDATEWAIT field
in the upper bits. Make this explicit using the mask and shift symbols
already defined, added as new fields in struct omap_vp_common.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
---
arch/arm/mach-omap2/vp.c | 3 ++-
arch/arm/mach-omap2/vp.h | 4 ++++
arch/arm/mach-omap2/vp3xxx_data.c | 3 +++
arch/arm/mach-omap2/vp44xx_data.c | 2 ++
4 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index e7d38f6..c3b7fde 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -227,7 +227,8 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
return 0;
}
- curr_vsel = voltdm->read(vp->voltage);
+ curr_vsel = (voltdm->read(vp->voltage) & vp->common->vpvoltage_mask)
+ >> vp->common->vpvoltage_shift;
if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv) {
pr_warning("%s: PMIC function to convert vsel to voltage"
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 0d63267..cb62a7b 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -63,6 +63,8 @@ struct omap_vp_ops {
* @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
* @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
* @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg
+ * @vpvoltage_shift: VPVOLTAGE field shift in PRM_VP*_VOLTAGE reg
*/
struct omap_vp_common {
u32 vpconfig_erroroffset_mask;
@@ -79,6 +81,8 @@ struct omap_vp_common {
u8 vlimitto_vddmin_shift;
u8 vlimitto_vddmax_shift;
u8 vlimitto_timeout_shift;
+ u8 vpvoltage_mask;
+ u8 vpvoltage_shift;
const struct omap_vp_ops *ops;
};
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index d429c44..0b149e0 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -51,6 +51,9 @@ static const struct omap_vp_common omap3_vp_common = {
.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK,
+ .vpvoltage_shift = OMAP3430_VPVOLTAGE_SHIFT,
+
.ops = &omap3_vp_ops,
};
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 0daf2a4..174d6f7 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -51,6 +51,8 @@ static const struct omap_vp_common omap4_vp_common = {
.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT,
.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT,
.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT,
+ .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK,
+ .vpvoltage_shift = OMAP4430_VPVOLTAGE_SHIFT,
.ops = &omap4_vp_ops,
};
--
1.7.3.1
next reply other threads:[~2011-05-27 3:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-27 3:03 Todd Poynor [this message]
2011-05-27 23:35 ` [PATCH pm_wip/voltdm_nm] ARM: OMAP: Explicitly mask VPVOLTAGE field Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110527030346.GA2720@google.com \
--to=toddpoynor@google.com \
--cc=khilman@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.