From: Marc MERLIN <marc@merlins.org>
To: linux-ide@vger.kernel.org
Subject: My laptop HD went RO, WRITE FPDMA QUEUED / SECURITY FREEZE LOCK?
Date: Thu, 2 Jun 2011 08:34:34 -0700 [thread overview]
Message-ID: <20110602153434.GA21488@merlins.org> (raw)
Howdy,
My laptop's hd, after over a year of good behaviour, went read only
last night, and this is what I got in dmesg.
I power cycled the laptop, but I wasn't able to reboot properly.
I then tried again with a boot cdrom and I was able to mount my partitions
and write to them.
After another reboot, the system came back online.
Any idea what happened, and if it's a random burp, or if it's likely to
happen again and I should swap the drive?
Thanks,
Marc
ata1: SError: { RecovData UnrecovData Handshk }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:00:66:92:38/00:00:0d:00:00/40 tag 0 ncq 4096 out
res 50/00:08:3d:ab:54/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:08:56:74:74/00:00:0c:00:00/40 tag 1 ncq 4096 out
res 50/00:08:3d:ab:54/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/10:10:d2:9a:ec/00:00:09:00:00/40 tag 2 ncq 8192 in
res 50/00:08:3d:ab:54/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:18:3d:ab:54/00:00:0e:00:00/40 tag 3 ncq 4096 out
res 50/00:08:3d:ab:54/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/33
ata1.00: configured for UDMA/33
ata1: EH complete
ata1.00: exception Emask 0x10 SAct 0xf SErr 0x400100 action 0x6 frozen
ata1.00: irq_stat 0x08000000, interface fatal error
ata1: SError: { UnrecovData Handshk }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/08:00:3d:ab:54/00:00:0e:00:00/40 tag 0 ncq 4096 out
res 50/00:08:66:92:38/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
/dev/sda:
Model=Hitachi HTS725050A9A364, FwRev=PC4OC70E, SerialNo=091102PCE400VLG24LEC
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=15151kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-2,3,4,5,6,7
smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 7K500
Device Model: Hitachi HTS725050A9A364
Serial Number: 091102PCE400VLG24LEC
Firmware Version: PC4OC70E
User Capacity: 500,107,862,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Thu Jun 2 08:28:23 2011 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 131) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 118 118 040 Pre-fail Offline - 3289
3 Spin_Up_Time 0x0007 156 156 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 1919
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 115 115 040 Pre-fail Offline - 34
9 Power_On_Hours 0x0012 078 078 000 Old_age Always - 9847
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1351
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2205810707
193 Load_Cycle_Count 0x0012 087 087 000 Old_age Always - 130747
194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Lifetime Min/Max 6/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 4
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 63
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 57 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 57 occurred at disk power-on lifetime: 9838 hours (409 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 01 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 01 01 00 00 a0 ff 03:06:19.300 WRITE FPDMA QUEUED
61 08 00 96 d1 98 45 ff 03:06:19.300 WRITE FPDMA QUEUED
61 08 08 c7 7a b3 40 08 03:06:19.300 WRITE FPDMA QUEUED
61 08 00 8f d1 98 40 08 03:06:19.300 WRITE FPDMA QUEUED
ec 00 00 00 00 00 a0 08 03:06:19.300 IDENTIFY DEVICE
Error 56 occurred at disk power-on lifetime: 9838 hours (409 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 01 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 01 01 00 00 a0 ff 03:06:19.000 WRITE FPDMA QUEUED
61 08 00 ce 7a b3 45 ff 03:06:19.000 WRITE FPDMA QUEUED
61 08 08 8f d1 98 40 08 03:06:19.000 WRITE FPDMA QUEUED
61 08 00 c7 7a b3 40 08 03:06:19.000 WRITE FPDMA QUEUED
ec 00 00 00 00 00 a0 08 03:06:19.000 IDENTIFY DEVICE
Error 55 occurred at disk power-on lifetime: 9838 hours (409 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 01 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 01 01 00 00 a0 ff 03:06:18.700 WRITE FPDMA QUEUED
61 08 01 01 00 00 a0 ff 03:06:18.700 WRITE FPDMA QUEUED
61 08 00 96 d1 98 45 ff 03:06:18.700 WRITE FPDMA QUEUED
61 08 08 c7 7a b3 40 08 03:06:18.700 WRITE FPDMA QUEUED
61 08 00 8f d1 98 40 08 03:06:18.700 WRITE FPDMA QUEUED
Error 54 occurred at disk power-on lifetime: 9838 hours (409 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 01 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 20 01 01 00 00 a0 ff 03:06:05.300 WRITE FPDMA QUEUED
61 20 e8 ba 8b 6c 43 ff 03:06:05.300 WRITE FPDMA QUEUED
61 20 08 92 b6 6b 40 08 03:06:05.300 WRITE FPDMA QUEUED
61 f8 00 aa 8b 6c 40 08 03:06:05.300 WRITE FPDMA QUEUED
ec 00 00 00 00 00 a0 08 03:06:05.300 IDENTIFY DEVICE
Error 53 occurred at disk power-on lifetime: 9838 hours (409 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 01 01 00 00 a0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 f8 10 a2 b6 6b 43 ff 03:06:05.000 WRITE FPDMA QUEUED
61 f8 08 aa 8b 6c 40 08 03:06:05.000 WRITE FPDMA QUEUED
61 20 00 92 b6 6b 40 08 03:06:05.000 WRITE FPDMA QUEUED
ec 00 00 00 00 00 a0 08 03:06:05.000 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 08 03:06:05.000 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 9841 -
# 2 Short offline Completed without error 00% 9825 -
# 3 Short offline Completed without error 00% 9803 -
# 4 Short offline Completed without error 00% 9779 -
# 5 Short offline Completed without error 00% 9756 -
# 6 Extended offline Completed without error 00% 9741 -
# 7 Short offline Completed without error 00% 9722 -
# 8 Short offline Completed without error 00% 9708 -
# 9 Short offline Completed without error 00% 9694 -
#10 Short offline Completed without error 00% 9680 -
#11 Short offline Completed without error 00% 9659 -
#12 Short offline Completed without error 00% 9635 -
#13 Extended offline Completed without error 00% 9619 -
#14 Short offline Completed without error 00% 9616 -
#15 Short offline Completed without error 00% 9597 -
#16 Short offline Completed without error 00% 9576 -
#17 Short offline Completed without error 00% 9556 -
#18 Short offline Completed without error 00% 9535 -
#19 Short offline Completed without error 00% 9514 -
#20 Short offline Completed without error 00% 9492 -
#21 Extended offline Completed without error 00% 9472 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/
reply other threads:[~2011-06-02 16:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110602153434.GA21488@merlins.org \
--to=marc@merlins.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.