From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: pull request: wireless-2.6 2011-06-03
Date: Fri, 3 Jun 2011 15:52:54 -0400 [thread overview]
Message-ID: <20110603195254.GF2509@tuxdriver.com> (raw)
Dave,
Here is a batch of fixes intended for 3.0 -- I guess I'll need to
rename my tree eventually... :-)
Included are a libertas fix to ensure proper sequence number assignment
on transmitted frames, an ath9k fix that propogates an earlier fix to a
few more places, a fix for a cfg80211 regression caused by some mesh
code changes, a locking fix for the bluetooth l2cap code, a zd1211rw
regression fix, a collection of small fixes for wl12xx, an iwl4965
fix for a bad temperature check, an a device ID-related fix for iwlagn.
Please let me know if there are problems!
Thanks,
John
---
The following changes since commit 9a2e0fb0893ddf595d0a372e681f5b98017c6d90:
tg3: Fix tg3_skb_error_unmap() (2011-06-03 00:01:30 -0700)
are available in the git repository at:
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git for-davem
Daniel Drake (1):
libertas: Set command sequence number later to ensure consistency
Daniel Halperin (1):
ath9k: fix two more bugs in tx power
Eliad Peller (1):
cfg80211: don't drop p2p probe responses
Johannes Berg (1):
bluetooth l2cap: fix locking in l2cap_global_chan_by_psm
John W. Linville (1):
Merge branch 'master' of git://git.kernel.org/.../linville/wireless-2.6 into for-davem
Jussi Kivilinna (1):
zd1211rw: fix to work on OHCI
Luciano Coelho (4):
wl12xx: fix passive and radar channel generation for scheduled scan
wl12xx: fix DFS channels handling in scheduled scan
wl12xx: add separate config value for DFS dwell time on sched scan
wl12xx: fix oops in sched_scan when forcing a passive scan
Stanislaw Gruszka (1):
iwl4965: correctly validate temperature value
Wey-Yi Guy (1):
iwlagn: fix incorrect PCI subsystem id for 6150 devices
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 10 ++++-
drivers/net/wireless/ath/ath9k/eeprom_9287.c | 10 ++++-
drivers/net/wireless/iwlegacy/iwl-4965.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-6000.c | 28 ++++++++----
drivers/net/wireless/iwlwifi/iwl-agn.c | 6 +-
drivers/net/wireless/iwlwifi/iwl-agn.h | 1 +
drivers/net/wireless/libertas/cmd.c | 6 +-
drivers/net/wireless/wl12xx/conf.h | 3 +
drivers/net/wireless/wl12xx/main.c | 1 +
drivers/net/wireless/wl12xx/scan.c | 49 +++++++++++++++-------
drivers/net/wireless/wl12xx/scan.h | 3 +
drivers/net/wireless/zd1211rw/zd_usb.c | 53 +++++++++++++++++++-----
include/linux/ieee80211.h | 8 +++-
net/bluetooth/l2cap_core.c | 2 +-
net/wireless/scan.c | 43 +++++++++++--------
15 files changed, 155 insertions(+), 70 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 0ca7635..ff8150e 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 7856f0d..343fc9f 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
scaledPower = max((u16)0, scaledPower);
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c
index f5433c7..f9db25b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965.c
@@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv)
s32 temp;
temp = iwl4965_hw_get_temperature(priv);
- if (temp < 0)
+ if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
return;
if (priv->temperature != temp) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index f8c710d..fda6fe0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = {
IWL_DEVICE_6050,
};
+#define IWL_DEVICE_6150 \
+ .fw_name_pre = IWL6050_FW_PRE, \
+ .ucode_api_max = IWL6050_UCODE_API_MAX, \
+ .ucode_api_min = IWL6050_UCODE_API_MIN, \
+ .ops = &iwl6150_ops, \
+ .eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
+ .base_params = &iwl6050_base_params, \
+ .need_dc_calib = true, \
+ .led_mode = IWL_LED_BLINK, \
+ .internal_wimax_coex = true
+
struct iwl_cfg iwl6150_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
- .fw_name_pre = IWL6050_FW_PRE,
- .ucode_api_max = IWL6050_UCODE_API_MAX,
- .ucode_api_min = IWL6050_UCODE_API_MIN,
- .eeprom_ver = EEPROM_6150_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
- .ops = &iwl6150_ops,
- .base_params = &iwl6050_base_params,
+ IWL_DEVICE_6150,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
- .led_mode = IWL_LED_RF_STATE,
- .internal_wimax_coex = true,
+};
+
+struct iwl_cfg iwl6150_bg_cfg = {
+ .name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+ IWL_DEVICE_6150,
};
struct iwl_cfg iwl6000_3agn_cfg = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 11c6c11..a662adc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
/* 6150 WiFi/WiMax Series */
{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
- {IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
+ {IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)},
/* 1000 Series WiFi */
{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index 2495fe7..d171684 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg;
extern struct iwl_cfg iwl6050_2agn_cfg;
extern struct iwl_cfg iwl6050_2abg_cfg;
extern struct iwl_cfg iwl6150_bgn_cfg;
+extern struct iwl_cfg iwl6150_bg_cfg;
extern struct iwl_cfg iwl1000_bgn_cfg;
extern struct iwl_cfg iwl1000_bg_cfg;
extern struct iwl_cfg iwl100_bgn_cfg;
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 84566db..71c8f3f 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv,
cmd = cmdnode->cmdbuf;
spin_lock_irqsave(&priv->driver_lock, flags);
+ priv->seqnum++;
+ cmd->seqnum = cpu_to_le16(priv->seqnum);
priv->cur_cmd = cmdnode;
spin_unlock_irqrestore(&priv->driver_lock, flags);
@@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
/* Copy the incoming command to the buffer */
memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
- /* Set sequence number, clean result, move to buffer */
- priv->seqnum++;
+ /* Set command, clean result, move to buffer */
cmdnode->cmdbuf->command = cpu_to_le16(command);
cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size);
- cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum);
cmdnode->cmdbuf->result = 0;
lbs_deb_host("PREP_CMD: command 0x%04x\n", command);
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 1ab6c86..c83fefb 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings {
/* time to wait on the channel for passive scans (in TUs) */
u32 dwell_time_passive;
+ /* time to wait on the channel for DFS scans (in TUs) */
+ u32 dwell_time_dfs;
+
/* number of probe requests to send on each channel in active scans */
u8 num_probe_reqs;
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index bc00e52..e6497dc 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = {
.min_dwell_time_active = 8,
.max_dwell_time_active = 30,
.dwell_time_passive = 100,
+ .dwell_time_dfs = 150,
.num_probe_reqs = 2,
.rssi_threshold = -90,
.snr_threshold = 0,
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index f37e5a3..56f76ab 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -331,16 +331,22 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
int i, j;
u32 flags;
+ bool force_passive = !req->n_ssids;
for (i = 0, j = start;
i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
i++) {
flags = req->channels[i]->flags;
- if (!(flags & IEEE80211_CHAN_DISABLED) &&
- ((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
- ((flags & IEEE80211_CHAN_RADAR) == radar) &&
- (req->channels[i]->band == band)) {
+ if (force_passive)
+ flags |= IEEE80211_CHAN_PASSIVE_SCAN;
+
+ if ((req->channels[i]->band == band) &&
+ !(flags & IEEE80211_CHAN_DISABLED) &&
+ (!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
+ /* if radar is set, we ignore the passive flag */
+ (radar ||
+ !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
req->channels[i]->band,
req->channels[i]->center_freq);
@@ -350,7 +356,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
wl1271_debug(DEBUG_SCAN, "max_power %d",
req->channels[i]->max_power);
- if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
+ if (flags & IEEE80211_CHAN_RADAR) {
+ channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
+ channels[j].passive_duration =
+ cpu_to_le16(c->dwell_time_dfs);
+ }
+ else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
channels[j].passive_duration =
cpu_to_le16(c->dwell_time_passive);
} else {
@@ -359,7 +370,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
channels[j].max_duration =
cpu_to_le16(c->max_dwell_time_active);
}
- channels[j].tx_power_att = req->channels[j]->max_power;
+ channels[j].tx_power_att = req->channels[i]->max_power;
channels[j].channel = req->channels[i]->hw_value;
j++;
@@ -386,7 +397,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_2GHZ,
false, false, idx);
- idx += cfg->active[0];
+ /*
+ * 5GHz channels always start at position 14, not immediately
+ * after the last 2.4GHz channel
+ */
+ idx = 14;
cfg->passive[1] =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
@@ -394,22 +409,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
false, true, idx);
idx += cfg->passive[1];
- cfg->active[1] =
+ cfg->dfs =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_5GHZ,
- false, false, 14);
- idx += cfg->active[1];
+ true, true, idx);
+ idx += cfg->dfs;
- cfg->dfs =
+ cfg->active[1] =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_5GHZ,
- true, false, idx);
- idx += cfg->dfs;
+ false, false, idx);
+ idx += cfg->active[1];
wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d",
cfg->active[0], cfg->passive[0]);
wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d",
cfg->active[1], cfg->passive[1]);
+ wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs);
return idx;
}
@@ -421,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
struct wl1271_cmd_sched_scan_config *cfg = NULL;
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
int i, total_channels, ret;
+ bool force_passive = !req->n_ssids;
wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
@@ -444,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
cfg->intervals[i] = cpu_to_le32(req->interval);
- if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
+ if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) {
cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
cfg->ssid_len = req->ssids[0].ssid_len;
memcpy(cfg->ssid, req->ssids[0].ssid,
@@ -461,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
goto out;
}
- if (cfg->active[0]) {
+ if (!force_passive && cfg->active[0]) {
ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
req->ssids[0].ssid_len,
ies->ie[IEEE80211_BAND_2GHZ],
@@ -473,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
}
}
- if (cfg->active[1]) {
+ if (!force_passive && cfg->active[1]) {
ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
req->ssids[0].ssid_len,
ies->ie[IEEE80211_BAND_5GHZ],
diff --git a/drivers/net/wireless/wl12xx/scan.h b/drivers/net/wireless/wl12xx/scan.h
index c833195..a0b6c5d 100644
--- a/drivers/net/wireless/wl12xx/scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -137,6 +137,9 @@ enum {
SCAN_BSS_TYPE_ANY,
};
+#define SCAN_CHANNEL_FLAGS_DFS BIT(0)
+#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1)
+
struct conn_scan_ch_params {
__le16 min_duration;
__le16 max_duration;
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 0e81994..631194d 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -1533,6 +1533,31 @@ static void __exit usb_exit(void)
module_init(usb_init);
module_exit(usb_exit);
+static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
+ int *actual_length, int timeout)
+{
+ /* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
+ * USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
+ * descriptor.
+ */
+ struct usb_host_endpoint *ep;
+ unsigned int pipe;
+
+ pipe = usb_sndintpipe(udev, EP_REGS_OUT);
+ ep = usb_pipe_endpoint(udev, pipe);
+ if (!ep)
+ return -EINVAL;
+
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ return usb_interrupt_msg(udev, pipe, data, len,
+ actual_length, timeout);
+ } else {
+ pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
+ return usb_bulk_msg(udev, pipe, data, len, actual_length,
+ timeout);
+ }
+}
+
static int usb_int_regs_length(unsigned int count)
{
return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
@@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
udev = zd_usb_to_usbdev(usb);
prepare_read_regs_int(usb);
- r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, &actual_req_len, 50 /* ms */);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error in usb_interrupt_msg(). Error number %d\n", r);
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto error;
}
if (req_len != actual_req_len) {
- dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
@@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
rw->value = cpu_to_le16(ioreqs[i].value);
}
- usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, iowrite16v_urb_complete, usb,
- ep->desc.bInterval);
+ /* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
+ * endpoint is bulk. Select correct type URB by endpoint descriptor.
+ */
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb,
+ ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
+ req, req_len, iowrite16v_urb_complete, usb);
+
urb->transfer_flags |= URB_FREE_BUFFER;
/* Submit previous URB */
@@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
}
udev = zd_usb_to_usbdev(usb);
- r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
- req, req_len, &actual_req_len, 50 /* ms */);
+ r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
- "error in usb_interrupt_msg(). Error number %d\n", r);
+ "error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto out;
}
if (req_len != actual_req_len) {
- dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
+ dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b2eee58..bf56b6f 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1003,8 +1003,12 @@ struct ieee80211_ht_info {
#define WLAN_CAPABILITY_ESS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
-/* A mesh STA sets the ESS and IBSS capability bits to zero */
-#define WLAN_CAPABILITY_IS_MBSS(cap) \
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap) \
(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index a86f9ba..e64a1c2 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -906,7 +906,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr
if (c->psm == psm) {
/* Exact match. */
if (!bacmp(&bt_sk(sk)->src, src)) {
- read_unlock_bh(&chan_list_lock);
+ read_unlock(&chan_list_lock);
return c;
}
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 73a441d..7a6c676 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -267,13 +267,35 @@ static bool is_bss(struct cfg80211_bss *a,
return memcmp(ssidie + 2, ssid, ssid_len) == 0;
}
+static bool is_mesh_bss(struct cfg80211_bss *a)
+{
+ const u8 *ie;
+
+ if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
+ return false;
+
+ ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
+ a->information_elements,
+ a->len_information_elements);
+ if (!ie)
+ return false;
+
+ ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
+ a->information_elements,
+ a->len_information_elements);
+ if (!ie)
+ return false;
+
+ return true;
+}
+
static bool is_mesh(struct cfg80211_bss *a,
const u8 *meshid, size_t meshidlen,
const u8 *meshcfg)
{
const u8 *ie;
- if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
+ if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
return false;
ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
@@ -311,7 +333,7 @@ static int cmp_bss(struct cfg80211_bss *a,
if (a->channel != b->channel)
return b->channel->center_freq - a->channel->center_freq;
- if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
+ if (is_mesh_bss(a) && is_mesh_bss(b)) {
r = cmp_ies(WLAN_EID_MESH_ID,
a->information_elements,
a->len_information_elements,
@@ -457,7 +479,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
struct cfg80211_internal_bss *res)
{
struct cfg80211_internal_bss *found = NULL;
- const u8 *meshid, *meshcfg;
/*
* The reference to "res" is donated to this function.
@@ -470,22 +491,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
res->ts = jiffies;
- if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
- /* must be mesh, verify */
- meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
- res->pub.information_elements,
- res->pub.len_information_elements);
- meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
- res->pub.information_elements,
- res->pub.len_information_elements);
- if (!meshid || !meshcfg ||
- meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
- /* bogus mesh */
- kref_put(&res->ref, bss_release);
- return NULL;
- }
- }
-
spin_lock_bh(&dev->bss_lock);
found = rb_find_bss(dev, res);
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2011-06-03 20:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-03 19:52 John W. Linville [this message]
2011-06-03 23:53 ` pull request: wireless-2.6 2011-06-03 David Miller
[not found] ` <BANLkTimoeVDQK+zu=U+nSM_kj0a3-hh_Jg@mail.gmail.com>
2011-06-04 13:04 ` John W. Linville
2011-06-04 14:36 ` Rafał Miłecki
2011-06-04 14:36 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110603195254.GF2509@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.