All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stanislaw Gruszka <sgruszka@redhat.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>,
	Intel Linux Wireless <ilw@linux.intel.com>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"Guy, Wey-Yi" <wey-yi.w.guy@intel.com>
Subject: Re: [PATCH v2] iwlagn: use cts-to-self protection on 5000 adapters series
Date: Mon, 6 Jun 2011 10:58:52 +0200	[thread overview]
Message-ID: <20110606085851.GA2391@redhat.com> (raw)
In-Reply-To: <1306421442.14995.325.camel@wwguy-huron>

On Thu, May 26, 2011 at 07:50:42AM -0700, Guy, Wey-Yi wrote:
> On Thu, 2011-05-26 at 08:14 -0700, Stanislaw Gruszka wrote:
> > This patch fixes 802.11n stability and performance regression we have
> > since 2.6.35. It boost performance on my 5GHz N-only network from about
> > 5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz.
> > 
> > These are test results of 5x downloading of approximately 700MB iso
> > image:
> > 
> > vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110
> > patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946
> > 
> > This was achieved with NetworkManager configured to do not perform
> > periodical scans, by configuring constant BSSID. With periodical scans,
> > after some time, performance downgrade to unpatched driver level, like
> > in example below:
> > 
> > patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683
> > 
> > However patch still make better here, since similar test on unpatched
> > driver make link disconnects with below messages after some time:
> > 
> > wlan1: authenticate with 00:23:69:35:d1:3f (try 1)
> > wlan1: authenticate with 00:23:69:35:d1:3f (try 2)
> > wlan1: authenticate with 00:23:69:35:d1:3f (try 3)
> > wlan1: authentication with 00:23:69:35:d1:3f timed out
> > 
> > On 2.6.35 kernel patch helps against connection hangs with messages:
> > 
> > iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload.
> > iwlagn 0000:20:00.0: On demand firmware reload
> > iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting
> > 
> > Cc: stable@kernel.org # 2.6.35+
> > Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

John, can you apply that patch and push upstream? Or should I
repost? I want backport it to Fedora 2.6.35 as it fixes random
11n connection hangs there (common F-14 bug).

> > ---
> > v1 -> v2: s/unpached/unpatched/
> > 
> >  drivers/net/wireless/iwlwifi/iwl-5000.c     |    1 -
> >  drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c |   12 ++----------
> >  drivers/net/wireless/iwlwifi/iwl-agn-rxon.c |    8 ++++++++
> >  3 files changed, 10 insertions(+), 11 deletions(-)
> > 
> > diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
> > index a70b8cf..f96eb5b 100644
> > --- a/drivers/net/wireless/iwlwifi/iwl-5000.c
> > +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
> > @@ -425,7 +425,6 @@ static struct iwl_base_params iwl5000_base_params = {
> >  };
> >  static struct iwl_ht_params iwl5000_ht_params = {
> >  	.ht_greenfield_support = true,
> > -	.use_rts_for_aggregation = true, /* use rts/cts protection */
> >  };
> >  
> >  #define IWL_DEVICE_5000						\
> > diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
> > index b12c72d..23fa93d 100644
> > --- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
> > +++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
> > @@ -163,17 +163,9 @@ static void iwlagn_tx_cmd_protection(struct iwl_priv *priv,
> >  				     __le16 fc, __le32 *tx_flags)
> >  {
> >  	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS ||
> > -	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
> > +	    info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT ||
> > +	    info->flags & IEEE80211_TX_CTL_AMPDU)
> >  		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
> > -		return;
> > -	}
> > -
> > -	if (priv->cfg->ht_params &&
> > -	    priv->cfg->ht_params->use_rts_for_aggregation &&
> > -	    info->flags & IEEE80211_TX_CTL_AMPDU) {
> > -		*tx_flags |= TX_CMD_FLG_PROT_REQUIRE_MSK;
> > -		return;
> > -	}
> >  }
> >  
> >  /* Calc max signal level (dBm) among 3 possible receivers */
> > diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
> > index a95ad84..0a1941d 100644
> > --- a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
> > +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
> > @@ -325,6 +325,14 @@ int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
> >  			return 0;
> >  	}
> >  
> > +	/*
> > +	 * force CTS-to-self frames protection if RTS-CTS is not preferred
> > +	 * one aggregation protection method
> > +	 */
> > +	if (!(priv->cfg->ht_params &&
> > +	      priv->cfg->ht_params->use_rts_for_aggregation))
> > +		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
> > +
> >  	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
> >  	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
> >  		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2011-06-06  8:59 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-26 15:14 [PATCH v2] iwlagn: use cts-to-self protection on 5000 adapters series Stanislaw Gruszka
2011-05-26 14:50 ` Guy, Wey-Yi
2011-05-26 15:20   ` Daniel Halperin
2011-05-30  9:40     ` Stanislaw Gruszka
2011-06-06  8:58   ` Stanislaw Gruszka [this message]
2011-06-06 18:21     ` John W. Linville
2011-06-06 21:35       ` Daniel Halperin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110606085851.GA2391@redhat.com \
    --to=sgruszka@redhat.com \
    --cc=ilw@linux.intel.com \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    --cc=wey-yi.w.guy@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.