Re: [alsa-devel] Headphone output doesn't work with 3.0.0-rc* anymore

[Michal Hocko <mhocko@suse.cz>]

On Thu 09-06-11 08:09:18, Takashi Iwai wrote:
> At Wed, 8 Jun 2011 19:48:55 +0200,
> Michal Hocko wrote:
> > 
> > On Wed 08-06-11 18:03:24, Takashi Iwai wrote:
> > > At Tue, 7 Jun 2011 20:05:58 +0200,
> > > Michal Hocko wrote:
> > > > 
> > > > Hi,
> > > > before 3.0.0-rc1, when I plugged anything into headphone output of my
> > > > laptop, speakers were disabled and the sound has been routed to the
> > > > headphone output. This doesn't seem to work anymore starting with
> > > > 3.0.0-rc1. Speakers stay on even if I plug something to the headphone
> > > > output.
> > > > Is this a bug or a new behavior that userspace has to cope
> > > > with?
> > > > 
> > > > I am sorry for the lack of information but I have no idea what to
> > > > provide.
> > > 
> > > Please give alsa-info.sh output at best.  Run it with --no-upload
> > > option, and attach the output file.  This will contain most of
> > > necessary information.
> > 
> > See attached. I have added also .39 output where things work as expected
> > (just in case it could be useful).
> 
> Thanks, that's helpful.
> As a quirk solution, could you try to pass model=auto option to
> snd-hda-intel module?

Headphones work now but speakers are quite... I have tried to play
with Headphone and Speaker controls in alsamixer but no changes.

Here is what I get in logs when the module is loaded:
[ 5320.360277] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 5326.920247] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5326.920262] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 5326.920279] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5326.920375] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 5326.920405] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5326.981085] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 5326.981262] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 5326.987934] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20

[maybe not important but input numbers are increasing for every new load]

There is another strange thing. After I stop mplayer and wait for some
time (~1min) I can hear a "click" sound and then there is no sound at
all... If I start mplayer in the meantime it just works...
If I try to remove the module and load it again then things work and stop
working after first playback again.

> You may need to adjust the mixer after changing
> this, but it should provide the full (even better) functionality.
> It'll support also the auto-mic jack switching.

$ amixer | grep -i "auto.*mic"
What is the control to look at?

Thanks
-- 
Michal Hocko
SUSE Labs
SUSE LINUX s.r.o.
Lihovarska 1060/12
190 00 Praha 9    
Czech Republic