[PATCH 05/07] mpt2sas: Added DID_NO_CONNECT return when driver remove and avoid shutdown call

["Kashyap, Desai" <kashyap.desai@lsi.com>]

>From scsih_qcmd, we add checkfor the ioc->remove_host flag, and return DID_NO_CONNECT.
Driver should not call shutdown call from _scsih_remove otherwise,
The scsi midlayer can be deadlocked when devices are removed from the driver 
pci_driver->shutdown handler.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 30f77dd..55b9632 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3766,7 +3766,7 @@ _scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 		return 0;
 	}
 
-	if (ioc->pci_error_recovery) {
+	if (ioc->pci_error_recovery || ioc->remove_host) {
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
 		return 0;
@@ -7314,7 +7314,6 @@ _scsih_remove(struct pci_dev *pdev)
 	}
 
 	sas_remove_host(shost);
-	_scsih_shutdown(pdev);
 	list_del(&ioc->list);
 	scsi_remove_host(shost);
 	scsi_host_put(shost);