From: Ondrej Zary <linux@rainbow-software.org>
To: "Greg Kroah-Hartman" <greg@kroah.com>
Cc: Marek Belisko <marek.belisko@gmail.com>,
Kernel development list <linux-kernel@vger.kernel.org>
Subject: [15/15] staging: ft1000-pcmcia: remove unused fields from struct ft1000_info
Date: Wed, 22 Jun 2011 20:42:31 +0200 [thread overview]
Message-ID: <201106222042.34030.linux@rainbow-software.org> (raw)
Remove 13 unused fields from struct ft1000_info.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000.h
@@ -324,25 +324,13 @@ struct ft1000_info {
struct net_device_stats stats;
u16 DrvErrNum;
u16 AsicID;
- int ASICResetNum;
- int DspAsicReset;
int PktIntfErr;
- int DSPResetNum;
- int NumIOCTLBufs;
- int IOCTLBufLvl;
- int DeviceCreated;
int CardReady;
- int DspHibernateFlag;
- int DSPReady;
- u8 DeviceName[15];
- int DeviceMajor;
int registered;
int mediastate;
u16 packetseqnum;
u8 squeseqnum; // sequence number on slow queue
spinlock_t dpram_lock;
- u16 CurrentInterruptEnableMask;
- int InterruptsEnabled;
u16 fifo_cnt;
u8 DspVer[DSPVERSZ]; // DSP version number
u8 HwSerNum[HWSERNUMSZ]; // Hardware Serial Number
@@ -358,7 +346,6 @@ struct ft1000_info {
u16 DSP_TIME[4];
struct list_head prov_list;
u16 DSPInfoBlklen;
- u16 DrvMsgPend;
int (*ft1000_reset)(void *);
void *link;
u16 DSPInfoBlk[MAX_DSP_SESS_REC];
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -323,17 +323,14 @@ void ft1000_write_dpram_mag_32(struct net_device *dev,
int offset, u32 value)
//---------------------------------------------------------------------------
static void ft1000_enable_interrupts(struct net_device *dev)
{
- struct ft1000_info *info = netdev_priv(dev);
u16 tempword;
DEBUG(1, "ft1000_hw:ft1000_enable_interrupts()\n");
- ft1000_write_reg(dev, FT1000_REG_SUP_IMASK,
- info->CurrentInterruptEnableMask);
+ ft1000_write_reg(dev, FT1000_REG_SUP_IMASK, ISR_DEFAULT_MASK);
tempword = ft1000_read_reg(dev, FT1000_REG_SUP_IMASK);
DEBUG(1,
"ft1000_hw:ft1000_enable_interrupts:current interrupt enable mask =
0x%x\n",
tempword);
- info->InterruptsEnabled = TRUE;
}
//---------------------------------------------------------------------------
@@ -348,7 +345,6 @@ static void ft1000_enable_interrupts(struct net_device
*dev)
//---------------------------------------------------------------------------
static void ft1000_disable_interrupts(struct net_device *dev)
{
- struct ft1000_info *info = netdev_priv(dev);
u16 tempword;
DEBUG(1, "ft1000_hw: ft1000_disable_interrupts()\n");
@@ -357,7 +353,6 @@ static void ft1000_disable_interrupts(struct net_device
*dev)
DEBUG(1,
"ft1000_hw:ft1000_disable_interrupts:current interrupt enable mask =
0x%x\n",
tempword);
- info->InterruptsEnabled = FALSE;
}
//---------------------------------------------------------------------------
@@ -379,7 +374,6 @@ static void ft1000_reset_asic(struct net_device *dev)
DEBUG(1, "ft1000_hw:ft1000_reset_asic called\n");
(*info->ft1000_reset) (info->link);
- info->ASICResetNum++;
// Let's use the register provided by the Magnemite ASIC to reset the
// ASIC and DSP.
@@ -456,14 +450,12 @@ static int ft1000_reset_card(struct net_device *dev)
if (ft1000_card_present == 1) {
spin_lock_irqsave(&info->dpram_lock, flags);
if (info->AsicID == ELECTRABUZZ_ID) {
- if (info->DspHibernateFlag == 0) {
- ft1000_write_reg(dev, FT1000_REG_DPRAM_ADDR,
- FT1000_DPRAM_RX_BASE);
- for (i = 0; i < MAX_DSP_SESS_REC; i++) {
- info->DSPSess.Rec[i] =
- ft1000_read_reg(dev,
- FT1000_REG_DPRAM_DATA);
- }
+ ft1000_write_reg(dev, FT1000_REG_DPRAM_ADDR,
+ FT1000_DPRAM_RX_BASE);
+ for (i = 0; i < MAX_DSP_SESS_REC; i++) {
+ info->DSPSess.Rec[i] =
+ ft1000_read_reg(dev,
+ FT1000_REG_DPRAM_DATA);
}
} else {
ft1000_write_reg(dev, FT1000_REG_DPRAM_ADDR,
@@ -481,8 +473,6 @@ static int ft1000_reset_card(struct net_device *dev)
//reset ASIC
ft1000_reset_asic(dev);
- info->DSPResetNum++;
-
DEBUG(1, "ft1000_hw:ft1000_reset_card:downloading dsp image\n");
if (info->AsicID == MAGNEMITE_ID) {
@@ -1168,7 +1158,6 @@ void ft1000_proc_drvmsg(struct net_device *dev)
case DSP_GET_INFO:
DEBUG(1, "FT1000:drivermsg:Got DSP_GET_INFO\n");
// copy dsp info block to dsp
- info->DrvMsgPend = 1;
// allow any outstanding ioctl to finish
mdelay(10);
tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);
@@ -1211,13 +1200,11 @@ void ft1000_proc_drvmsg(struct net_device *dev)
htons(info->DSPInfoBlklen);
ft1000_send_cmd (dev, (PUSHORT)info->DSPInfoBlk, (USHORT)
(info->DSPInfoBlklen+4), 0);
}
- info->DrvMsgPend = 0;
break;
case GET_DRV_ERR_RPT_MSG:
DEBUG(1, "FT1000:drivermsg:Got GET_DRV_ERR_RPT_MSG\n");
// copy driver error message to dsp
- info->DrvMsgPend = 1;
// allow any outstanding ioctl to finish
mdelay(10);
tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);
@@ -1272,7 +1259,6 @@ void ft1000_proc_drvmsg(struct net_device *dev)
ft1000_send_cmd (dev, (PUSHORT)&tempbuffer[0], (USHORT)(0x0012), 0);
info->DrvErrNum = 0;
}
- info->DrvMsgPend = 0;
break;
default:
@@ -1339,13 +1325,11 @@ int ft1000_parse_dpram_msg(struct net_device *dev)
ft1000_write_reg(dev, FT1000_REG_SUP_CTRL,
HOST_INTF_BE);
}
- info->DspAsicReset = 0;
}
if (doorbell & FT1000_DSP_ASIC_RESET) {
DEBUG(0,
"FT1000:ft1000_parse_dpram_msg: Got a dsp ASIC reset message\n");
- info->DspAsicReset = 1;
ft1000_write_reg(dev, FT1000_REG_DOORBELL,
FT1000_DSP_ASIC_RESET);
udelay(200);
@@ -2198,16 +2182,11 @@ struct net_device *init_ft1000_card(struct
pcmcia_device *link,
spin_lock_init(&info->dpram_lock);
info->DrvErrNum = 0;
- info->ASICResetNum = 0;
info->registered = 1;
info->link = link;
info->ft1000_reset = ft1000_reset;
info->mediastate = 0;
info->fifo_cnt = 0;
- info->DeviceCreated = FALSE;
- info->DeviceMajor = 0;
- info->CurrentInterruptEnableMask = ISR_DEFAULT_MASK;
- info->InterruptsEnabled = FALSE;
info->CardReady = 0;
info->DSP_TIME[0] = 0;
info->DSP_TIME[1] = 0;
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_proc.c
@@ -75,16 +75,14 @@ int ft1000ReadProc(char *page, char **start, off_t off,
/* Wrap-around */
if (info->AsicID == ELECTRABUZZ_ID) {
- if (info->DspHibernateFlag == 0) {
- if (info->ProgConStat != 0xFF) {
- info->LedStat =
- ft1000_read_dpram(dev, FT1000_DSP_LED);
- info->ConStat =
- ft1000_read_dpram(dev,
- FT1000_DSP_CON_STATE);
- } else {
- info->ConStat = 0xf;
- }
+ if (info->ProgConStat != 0xFF) {
+ info->LedStat =
+ ft1000_read_dpram(dev, FT1000_DSP_LED);
+ info->ConStat =
+ ft1000_read_dpram(dev,
+ FT1000_DSP_CON_STATE);
+ } else {
+ info->ConStat = 0xf;
}
} else {
if (info->ProgConStat != 0xFF) {
--
Ondrej Zary
reply other threads:[~2011-06-22 18:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201106222042.34030.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marek.belisko@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.