All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jon Mason <jdmason@kudzu.us>
To: Matt Carlson <mcarlson@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>, netdev@vger.kernel.org
Subject: [PATCH 15/19 v2] tg3: remove unnecessary read of PCI_CAP_ID_EXP
Date: Mon, 27 Jun 2011 17:56:50 -0500	[thread overview]
Message-ID: <20110627225649.GA20786@kudzu.us> (raw)
In-Reply-To: <1309196854-16232-1-git-send-email-jdmason@kudzu.us>

The PCIE capability offset is saved during PCI bus walking.  Use the
value from pci_dev instead of checking in the driver and saving it off
the the driver specific structure.  It will remove an unnecessary search
in the PCI configuration space if this value is referenced instead of
reacquiring it.

v2 of the patch re-adds the PCI_EXPRESS flag and adds comments
describing why it is necessary.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
---
 drivers/net/tg3.c |   25 ++++++++++++++-----------
 drivers/net/tg3.h |    5 +----
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 97cd02d..a555efd 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2679,11 +2679,11 @@ static int tg3_power_down_prepare(struct tg3 *tp)
 		u16 lnkctl;
 
 		pci_read_config_word(tp->pdev,
-				     tp->pcie_cap + PCI_EXP_LNKCTL,
+				     tp->pdev->pcie_cap + PCI_EXP_LNKCTL,
 				     &lnkctl);
 		lnkctl |= PCI_EXP_LNKCTL_CLKREQ_EN;
 		pci_write_config_word(tp->pdev,
-				      tp->pcie_cap + PCI_EXP_LNKCTL,
+				      tp->pdev->pcie_cap + PCI_EXP_LNKCTL,
 				      lnkctl);
 	}
 
@@ -3485,7 +3485,7 @@ relink:
 		u16 oldlnkctl, newlnkctl;
 
 		pci_read_config_word(tp->pdev,
-				     tp->pcie_cap + PCI_EXP_LNKCTL,
+				     tp->pdev->pcie_cap + PCI_EXP_LNKCTL,
 				     &oldlnkctl);
 		if (tp->link_config.active_speed == SPEED_100 ||
 		    tp->link_config.active_speed == SPEED_10)
@@ -3494,7 +3494,7 @@ relink:
 			newlnkctl = oldlnkctl | PCI_EXP_LNKCTL_CLKREQ_EN;
 		if (newlnkctl != oldlnkctl)
 			pci_write_config_word(tp->pdev,
-					      tp->pcie_cap + PCI_EXP_LNKCTL,
+					      tp->pdev->pcie_cap + PCI_EXP_LNKCTL,
 					      newlnkctl);
 	}
 
@@ -7226,7 +7226,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	udelay(120);
 
-	if (tg3_flag(tp, PCI_EXPRESS) && tp->pcie_cap) {
+	if (tg3_flag(tp, PCI_EXPRESS) && pci_pcie_cap(tp->pdev)) {
 		u16 val16;
 
 		if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A0) {
@@ -7244,7 +7244,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 		/* Clear the "no snoop" and "relaxed ordering" bits. */
 		pci_read_config_word(tp->pdev,
-				     tp->pcie_cap + PCI_EXP_DEVCTL,
+				     tp->pdev->pcie_cap + PCI_EXP_DEVCTL,
 				     &val16);
 		val16 &= ~(PCI_EXP_DEVCTL_RELAX_EN |
 			   PCI_EXP_DEVCTL_NOSNOOP_EN);
@@ -7255,14 +7255,14 @@ static int tg3_chip_reset(struct tg3 *tp)
 		if (!tg3_flag(tp, CPMU_PRESENT))
 			val16 &= ~PCI_EXP_DEVCTL_PAYLOAD;
 		pci_write_config_word(tp->pdev,
-				      tp->pcie_cap + PCI_EXP_DEVCTL,
+				      tp->pdev->pcie_cap + PCI_EXP_DEVCTL,
 				      val16);
 
 		pcie_set_readrq(tp->pdev, tp->pcie_readrq);
 
 		/* Clear error status */
 		pci_write_config_word(tp->pdev,
-				      tp->pcie_cap + PCI_EXP_DEVSTA,
+				      tp->pdev->pcie_cap + PCI_EXP_DEVSTA,
 				      PCI_EXP_DEVSTA_CED |
 				      PCI_EXP_DEVSTA_NFED |
 				      PCI_EXP_DEVSTA_FED |
@@ -13777,8 +13777,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
 			      &pci_state_reg);
 
-	tp->pcie_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_EXP);
-	if (tp->pcie_cap != 0) {
+	if (pci_is_pcie(tp->pdev)) {
 		u16 lnkctl;
 
 		tg3_flag_set(tp, PCI_EXPRESS);
@@ -13791,7 +13790,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		pcie_set_readrq(tp->pdev, tp->pcie_readrq);
 
 		pci_read_config_word(tp->pdev,
-				     tp->pcie_cap + PCI_EXP_LNKCTL,
+				     tp->pdev->pcie_cap + PCI_EXP_LNKCTL,
 				     &lnkctl);
 		if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN) {
 			if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
@@ -13808,6 +13807,10 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 			tg3_flag_set(tp, L1PLLPD_EN);
 		}
 	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) {
+		/* BCM5785 devices are effectively PCIe devices, and should
+		 * follow PCIe codepaths, but do not have a PCIe capabilities
+		 * section.
+		*/
 		tg3_flag_set(tp, PCI_EXPRESS);
 	} else if (!tg3_flag(tp, 5705_PLUS) ||
 		   tg3_flag(tp, 5780_CLASS)) {
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index bedc3b4..5f250ae 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2857,7 +2857,7 @@ enum TG3_FLAGS {
 	TG3_FLAG_IS_5788,
 	TG3_FLAG_MAX_RXPEND_64,
 	TG3_FLAG_TSO_CAPABLE,
-	TG3_FLAG_PCI_EXPRESS,
+	TG3_FLAG_PCI_EXPRESS, /* BCM5785 + pci_is_pcie() */
 	TG3_FLAG_ASF_NEW_HANDSHAKE,
 	TG3_FLAG_HW_AUTONEG,
 	TG3_FLAG_IS_NIC,
@@ -3022,10 +3022,7 @@ struct tg3 {
 
 	int				pm_cap;
 	int				msi_cap;
-	union {
 	int				pcix_cap;
-	int				pcie_cap;
-	};
 	int				pcie_readrq;
 
 	struct mii_bus			*mdio_bus;
-- 
1.7.5.4


  parent reply	other threads:[~2011-06-27 22:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1309196854-16232-1-git-send-email-jdmason@kudzu.us>
     [not found] ` <20110627184203.GA5817@mcarlson.broadcom.com>
     [not found]   ` <BANLkTi=-aoj=zg7BZbkzVikF7V9Si8c1xA@mail.gmail.com>
2011-06-27 20:38     ` [PATCH 15/19] tg3: remove unnecessary read of PCI_CAP_ID_EXP Matt Carlson
2011-06-27 22:56 ` Jon Mason [this message]
2011-06-27 23:33   ` [PATCH 15/19 v2] " Matt Carlson, Jon Mason
2011-06-28  4:39     ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110627225649.GA20786@kudzu.us \
    --to=jdmason@kudzu.us \
    --cc=mcarlson@broadcom.com \
    --cc=mchan@broadcom.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.