From: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
To: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
Date: Wed, 29 Jun 2011 22:59:31 +0200 [thread overview]
Message-ID: <201106292259.32063.a.miskiewicz@gmail.com> (raw)
In-Reply-To: <Pine.LNX.4.44L0.1106291557080.2064-100000@iolanthe.rowland.org>
On Wednesday 29 of June 2011, Alan Stern wrote:
> On Wed, 29 Jun 2011, Arkadiusz Miskiewicz wrote:
> > Hi,
> >
> > Something broke between rc3 and rc5. Thinkpad t400, logitech usb mouse.
> > After resume from ram usb device no longer works. Somewhere around rc3 it
> > was working fine.
>
> Obviously you can try bisection to find the problem. But if you don't
> want to go through that, you could post the dmesg from a kernel that
> has CONFIG_USB_DEBUG enabled.
CONFIG_USB_DEBUG will be faster but I'll bisect if no one figures out what's
wrong.
Note that I tried to unplug & plugin usb mouse after all this dmesg but
nothing new appeared in dmesg - kernel didn't notice that I did that.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc5-00063-g0d72c6f (arekm@ixion-pld) (gcc
version 4.6.1 20110627 (release) (PLD-Linux) ) #7 SMP PREEMPT Wed Jun 29
22:51:36 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0
root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
[ 0.000000] BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 2764CTO/2764CTO, BIOS 7UET91WW (3.21 ) 12/06/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 13C000000 mask FFC000000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0BDE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000bde00000 - 0000000100000000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xbda00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bda00000
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] kernel direct mapping tables up to bda00000 @ bd6c2000-bd6c6000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013c000000
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @
13bffa000-13c000000
[ 0.000000] RAMDISK: 37eb0000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bd949b5a 0009C (v01 LENOVO TP-7U 00003210
LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bd949d00 000F4 (v03 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bd94a10e 0FAE1 (v01 LENOVO TP-7U 00003210
MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bd98e000 00040
[ 0.000000] ACPI: SSDT 00000000bd949eb4 0025A (v01 LENOVO TP-7U 00003210
MSFT 03000000)
[ 0.000000] ACPI: ECDT 00000000bd959bef 00052 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bd959c41 00078 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bd959cb9 0003C (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bd959cf5 00038 (v01 LENOVO TP-7U 00003210
LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bd959dc2 00176 (v01 LENOVO TP-7U 00003210
LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bd959f38 00028 (v01 LENOVO TP-7U 00003210
LTP 00000001)
[ 0.000000] ACPI: ASF! 00000000bd959f60 000A0 (v16 LENOVO TP-7U 00003210
PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bd98d1fa 00568 (v01 LENOVO TP-7U 00003210
INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bd707000 00032 (v00 00000000
00000000)
[ 0.000000] ACPI: DMAR 00000000bd706000 00120 (v01 ? 00000001
00000000)
[ 0.000000] ACPI: SSDT 00000000bd6d3000 00655 (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d2000 00274 (v01 PmRef Cpu0Tst 00003000
INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bd6d1000 00242 (v01 PmRef ApTst 00003000
INTL 20050624)
[ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013c000000
[ 0.000000] NODE_DATA [000000013bffb000 - 000000013bffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880137600000-
ffff88013adfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd4a1
[ 0.000000] 0: 0x000bd4a7 -> 0x000bd5b7
[ 0.000000] 0: 0x000bd60f -> 0x000bd6c6
[ 0.000000] 0: 0x000bd9ff -> 0x000bda00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1021431
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 757409 pages, LIFO batch:31
[ 0.000000] Normal zone: 3360 pages used for memmap
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] 4 Processors exceeds NR_CPUS limit of 2
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 -
00000000bd4a7000
[ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 -
00000000bd60f000
[ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 -
00000000bd6d1000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 -
00000000bd6d4000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 -
00000000bd6d8000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 -
00000000bd6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 -
00000000bd6df000
[ 0.000000] PM: Registered nosave memory: 00000000bd6df000 -
00000000bd706000
[ 0.000000] PM: Registered nosave memory: 00000000bd706000 -
00000000bd708000
[ 0.000000] PM: Registered nosave memory: 00000000bd708000 -
00000000bd90f000
[ 0.000000] PM: Registered nosave memory: 00000000bd90f000 -
00000000bd99f000
[ 0.000000] PM: Registered nosave memory: 00000000bd99f000 -
00000000bd9ff000
[ 0.000000] PM: Registered nosave memory: 00000000bda00000 -
00000000bdc00000
[ 0.000000] PM: Registered nosave memory: 00000000bdc00000 -
00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 -
00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 -
00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 -
00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 -
00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 -
00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 -
00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 -
00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 -
00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88013bc00000 s69760 r8192
d24448 u1048576
[ 0.000000] pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1003730
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0
root=/dev/mapper/lrootfs ro resume=/dev/sda2 panic=60 reboot=acpi
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3950216k/5177344k available (4134k kernel code,
1091620k absent, 135508k reserved, 4577k data, 568k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2527.349 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer
frequency.. 5054.69 BogoMIPS (lpj=10109396)
[ 0.004118] pid_max: default: 32768 minimum: 301
[ 0.004202] Security Framework initialized
[ 0.008117] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.010257] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.011269] Mount-cache hash table entries: 256
[ 0.011491] Initializing cgroup subsys cpuacct
[ 0.011553] Initializing cgroup subsys memory
[ 0.011616] Initializing cgroup subsys devices
[ 0.011672] Initializing cgroup subsys freezer
[ 0.011727] Initializing cgroup subsys perf_event
[ 0.011811] Disabled fast string operations
[ 0.011868] CPU: Physical Processor ID: 0
[ 0.011922] CPU: Processor Core ID: 0
[ 0.011976] mce: CPU supports 6 MCE banks
[ 0.012015] CPU0: Thermal monitoring enabled (TM2)
[ 0.012073] using mwait in idle threads.
[ 0.012146] ACPI: Core revision 20110413
[ 0.020415] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062716] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping
06
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.092019] Booting Node 0, Processors #1 Ok.
[ 0.092117] smpboot cpu 1: start_ip = 99000
[ 0.008000] Disabled fast string operations
[ 0.184027] Brought up 2 CPUs
[ 0.184139] Total of 2 processors activated (10108.65 BogoMIPS).
[ 0.185759] devtmpfs: initialized
[ 0.185759] PM: Registering ACPI NVS region at bd6c6000 (45056 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd6d8000 (16384 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd6df000 (159744 bytes)
[ 0.185759] PM: Registering ACPI NVS region at bd90f000 (589824 bytes)
[ 0.185759] print_constraints: dummy:
[ 0.185759] NET: Registered protocol family 16
[ 0.185759] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.185759] ACPI: bus type pci registered
[ 0.185759] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.185759] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.197214] PCI: Using configuration type 1 for base access
[ 0.197299] bio: create slab <bio-0> at 0
[ 0.197299] ACPI: Added _OSI(Linux)
[ 0.201700] ACPI: EC: EC description table is found, configuring boot EC
[ 0.207994] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI
[ 0.225327] ACPI: SSDT 00000000bd6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.225880] ACPI: Dynamic OEM Table Load:
[ 0.226017] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000
INTL 20050624)
[ 0.226305] ACPI: SSDT 00000000bd6d4020 0087A (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.226887] ACPI: Dynamic OEM Table Load:
[ 0.227023] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001
INTL 20050624)
[ 0.252260] ACPI: SSDT 00000000bd6d5ca0 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.252827] ACPI: Dynamic OEM Table Load:
[ 0.252963] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000
INTL 20050624)
[ 0.264066] ACPI: SSDT 00000000bd6d5f20 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.264616] ACPI: Dynamic OEM Table Load:
[ 0.264753] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000
INTL 20050624)
[ 0.284148] ACPI: Interpreter enabled
[ 0.284205] ACPI: (supports S0 S3 S4 S5)
[ 0.284436] ACPI: Using IOAPIC for interrupt routing
[ 0.296091] ACPI: Power Resource [PUBS] (on)
[ 0.304158] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.308346] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.308386] HEST: Table not found.
[ 0.308442] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.308735] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.308827] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.308827] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d3fff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 0.308827] pci_root PNP0A08:00: host bridge window [mem
0xc0000000-0xfebfffff]
[ 0.308827] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.308827] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.308827] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit]
[ 0.308827] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit
pref]
[ 0.308827] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.308827] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.308827] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit]
[ 0.308827] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.308827] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit]
[ 0.308827] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.308827] pci 0000:00:03.0: PME# disabled
[ 0.308827] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.308827] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff]
[ 0.308832] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff]
[ 0.308843] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.308910] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.308914] pci 0000:00:19.0: PME# disabled
[ 0.308938] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.308993] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.309049] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.309103] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.309160] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.309215] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.309282] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.309306] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff]
[ 0.309393] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.309398] pci 0000:00:1a.7: PME# disabled
[ 0.309428] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.309448] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit]
[ 0.309523] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.309528] pci 0000:00:1b.0: PME# disabled
[ 0.309556] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.309634] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.309638] pci 0000:00:1c.0: PME# disabled
[ 0.309667] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.309745] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.309749] pci 0000:00:1c.1: PME# disabled
[ 0.309779] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
[ 0.309857] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.309861] pci 0000:00:1c.3: PME# disabled
[ 0.309890] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.309968] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.309973] pci 0000:00:1c.4: PME# disabled
[ 0.310006] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.310061] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.310117] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.310172] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.310229] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.312073] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.312142] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.312166] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff]
[ 0.312253] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.312259] pci 0000:00:1d.7: PME# disabled
[ 0.312285] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.312364] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.312515] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
[ 0.312542] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.312553] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.312564] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.312575] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.312585] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f]
[ 0.312596] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff]
[ 0.312645] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.312649] pci 0000:00:1f.2: PME# disabled
[ 0.312672] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.312693] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit]
[ 0.312722] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.312811] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.312872] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.312876] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 0.312884] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.313001] pci 0000:03:00.0: [8086:423b] type 0 class 0x000280
[ 0.313044] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit]
[ 0.313206] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.313217] pci 0000:03:00.0: PME# disabled
[ 0.313280] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.313341] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.313345] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.313352] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 0.313408] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.313469] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.313473] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.313480] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff
64bit pref]
[ 0.313536] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.313596] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.313601] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.313608] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff
64bit pref]
[ 0.313653] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607
[ 0.313677] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled
(via cardbus function)
[ 0.313748] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI
controller
[ 0.313835] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff]
[ 0.313862] pci 0000:15:00.0: supports D1 D2
[ 0.313864] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.313870] pci 0000:15:00.0: PME# disabled
[ 0.313894] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00
[ 0.313919] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff]
[ 0.314019] pci 0000:15:00.1: supports D1 D2
[ 0.314021] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314026] pci 0000:15:00.1: PME# disabled
[ 0.314051] pci 0000:15:00.2: [1180:0822] type 0 class 0x000805
[ 0.314075] pci 0000:15:00.2: reg 10: [mem 0xf4801800-0xf48018ff]
[ 0.314175] pci 0000:15:00.2: supports D1 D2
[ 0.314177] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314182] pci 0000:15:00.2: PME# disabled
[ 0.314210] pci 0000:15:00.4: [1180:0592] type 0 class 0x000880
[ 0.314235] pci 0000:15:00.4: reg 10: [mem 0xf4802000-0xf48020ff]
[ 0.314334] pci 0000:15:00.4: supports D1 D2
[ 0.314336] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314341] pci 0000:15:00.4: PME# disabled
[ 0.314366] pci 0000:15:00.5: [1180:0852] type 0 class 0x000880
[ 0.314391] pci 0000:15:00.5: reg 10: [mem 0xf4802400-0xf48024ff]
[ 0.314490] pci 0000:15:00.5: supports D1 D2
[ 0.314492] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314497] pci 0000:15:00.5: PME# disabled
[ 0.314568] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive
decode)
[ 0.314631] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.314636] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.314643] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff
64bit pref]
[ 0.314645] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.314648] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.314650] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 0.314652] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff]
(subtractive decode)
[ 0.314655] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff]
(subtractive decode)
[ 0.314657] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff]
(subtractive decode)
[ 0.314659] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff]
(subtractive decode)
[ 0.314740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.314850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.314881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.314912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.314944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.314975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.315230] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.315636] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.320095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.320602] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321636] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322154] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322671] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.323193] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.324372] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.324863] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.324863] vgaarb: loaded
[ 0.324863] vgaarb: bridge control possible 0000:00:02.0
[ 0.324863] PCI: Using ACPI for IRQ routing
[ 0.326357] PCI: pci_cache_line_size set to 64 bytes
[ 0.326474] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.326476] reserve RAM buffer: 00000000bd4a1000 - 00000000bfffffff
[ 0.326480] reserve RAM buffer: 00000000bd5b7000 - 00000000bfffffff
[ 0.326484] reserve RAM buffer: 00000000bd6c6000 - 00000000bfffffff
[ 0.326488] reserve RAM buffer: 00000000bda00000 - 00000000bfffffff
[ 0.328033] NetLabel: Initializing
[ 0.328088] NetLabel: domain hash size = 128
[ 0.328144] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.328210] NetLabel: unlabeled traffic allowed by default
[ 0.328273] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.328337] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.328595] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.336086] Switching to clocksource hpet
[ 0.337506] pnp: PnP ACPI init
[ 0.337515] ACPI: bus type pnp registered
[ 0.357722] Switched to NOHz mode on CPU #1
[ 0.357723] Switched to NOHz mode on CPU #0
[ 0.357821] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.357823] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.357824] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.357826] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.357827] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.357829] pnp 00:00: [mem 0x000d0000-0x000cffff disabled]
[ 0.357831] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.357832] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.357834] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.357836] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.357838] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.357840] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.357842] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.357844] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.357846] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.357848] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.357849] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.357934] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.357995] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.358056] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.358116] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.358176] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.358237] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.358297] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.358358] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.358418] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.358479] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.358539] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.358600] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.358660] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.358721] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.358782] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.358800] pnp 00:01: [bus 00-ff]
[ 0.358802] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.358804] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.358806] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.358808] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.358810] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.358812] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.358814] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.358816] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.358818] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.358820] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.358822] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.358824] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.358826] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.358828] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.358830] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.358833] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.358835] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.358837] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.358909] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.378800] pnp 00:02: [io 0x0010-0x001f]
[ 0.378802] pnp 00:02: [io 0x0090-0x009f]
[ 0.378804] pnp 00:02: [io 0x0024-0x0025]
[ 0.378805] pnp 00:02: [io 0x0028-0x0029]
[ 0.378807] pnp 00:02: [io 0x002c-0x002d]
[ 0.378809] pnp 00:02: [io 0x0030-0x0031]
[ 0.378810] pnp 00:02: [io 0x0034-0x0035]
[ 0.378812] pnp 00:02: [io 0x0038-0x0039]
[ 0.378813] pnp 00:02: [io 0x003c-0x003d]
[ 0.378815] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.378816] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.378818] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.378820] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.378821] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.378823] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.378824] pnp 00:02: [io 0x0050-0x0053]
[ 0.378826] pnp 00:02: [io 0x0072-0x0077]
[ 0.378827] pnp 00:02: [io 0x002e-0x002f]
[ 0.378829] pnp 00:02: [io 0x1000-0x107f]
[ 0.378831] pnp 00:02: [io 0x1180-0x11ff]
[ 0.378832] pnp 00:02: [io 0x0800-0x080f]
[ 0.378834] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.378835] pnp 00:02: [io 0x1600-0x167f]
[ 0.378837] pnp 00:02: [io 0x1680-0x169f]
[ 0.378839] pnp 00:02: [mem 0xe0000000-0xefffffff]
[ 0.378841] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.378842] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.378844] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.378846] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.378848] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.378944] system 00:02: [io 0x1000-0x107f] has been reserved
[ 0.379004] system 00:02: [io 0x1180-0x11ff] has been reserved
[ 0.379065] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.379124] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.379183] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.379242] system 00:02: [io 0x1680-0x169f] has been reserved
[ 0.379302] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.379362] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.379422] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.379483] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.379543] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.379603] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.379663] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.379699] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.379751] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.379761] pnp 00:04: [io 0x0000-0x000f]
[ 0.379763] pnp 00:04: [io 0x0080-0x008f]
[ 0.379765] pnp 00:04: [io 0x00c0-0x00df]
[ 0.379766] pnp 00:04: [dma 4]
[ 0.379817] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.379826] pnp 00:05: [io 0x0061]
[ 0.379876] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.379885] pnp 00:06: [io 0x00f0]
[ 0.379892] pnp 00:06: [irq 13]
[ 0.379942] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.379951] pnp 00:07: [io 0x0070-0x0071]
[ 0.379959] pnp 00:07: [irq 8]
[ 0.380031] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.380041] pnp 00:08: [io 0x0060]
[ 0.380042] pnp 00:08: [io 0x0064]
[ 0.380047] pnp 00:08: [irq 1]
[ 0.380098] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.380110] pnp 00:09: [irq 12]
[ 0.380162] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13
(active)
[ 0.400086] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.400157] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.400645] pnp: PnP ACPI: found 11 devices
[ 0.400701] ACPI: ACPI bus type pnp unregistered
[ 0.409092] PCI: max bus depth: 2 pci_try_num: 3
[ 0.409145] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff
64bit pref]
[ 0.409218] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.409279] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.409341] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0400000-0xc05fffff
64bit pref]
[ 0.409413] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.409473] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.409532] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.409595] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.409658] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc05fffff
64bit pref]
[ 0.409734] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.409793] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff]
[ 0.409855] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff]
[ 0.409918] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc01fffff
64bit pref]
[ 0.409994] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.410053] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.410115] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.410178] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff
64bit pref]
[ 0.410254] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.410313] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.410376] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.410438] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff
64bit pref]
[ 0.410515] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff
pref]
[ 0.410588] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.410648] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.410708] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.410767] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.410825] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff]
[ 0.410887] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff]
[ 0.410950] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff
pref]
[ 0.411023] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.411086] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.411145] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff]
[ 0.411208] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff]
[ 0.411271] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff
64bit pref]
[ 0.411355] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.413233] pci 0000:00:1c.0: setting latency timer to 64
[ 0.413242] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.413305] pci 0000:00:1c.1: setting latency timer to 64
[ 0.413313] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.413375] pci 0000:00:1c.3: setting latency timer to 64
[ 0.413382] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.413444] pci 0000:00:1c.4: setting latency timer to 64
[ 0.413452] pci 0000:00:1e.0: setting latency timer to 64
[ 0.413461] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.413525] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.413527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.413529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.413532] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.413534] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.413536] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.413538] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.413540] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.413542] pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.413544] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit
pref]
[ 0.413547] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
[ 0.413549] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff]
[ 0.413551] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit
pref]
[ 0.413553] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.413555] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.413557] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit
pref]
[ 0.413560] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.413562] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.413564] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit
pref]
[ 0.413566] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff]
[ 0.413568] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff]
[ 0.413570] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit
pref]
[ 0.413572] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.413574] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.413576] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.413579] pci_bus 0000:15: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.413581] pci_bus 0000:15: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.413583] pci_bus 0000:15: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.413585] pci_bus 0000:15: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.413587] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff]
[ 0.413589] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff]
[ 0.413591] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.413593] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.413627] NET: Registered protocol family 2
[ 0.413805] IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.415073] TCP established hash table entries: 524288 (order: 11, 8388608
bytes)
[ 0.418309] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.418833] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.418893] TCP reno registered
[ 0.418955] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.419049] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.419266] NET: Registered protocol family 1
[ 0.419340] pci 0000:00:02.0: Boot video device
[ 0.419355] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419357] pci 0000:00:1a.0: Performing full reset
[ 0.419377] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419379] pci 0000:00:1a.1: Performing full reset
[ 0.419398] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419400] pci 0000:00:1a.2: Performing full reset
[ 0.419464] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419466] pci 0000:00:1d.0: Performing full reset
[ 0.419485] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419487] pci 0000:00:1d.1: Performing full reset
[ 0.419507] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0
[ 0.419508] pci 0000:00:1d.2: Performing full reset
[ 0.419578] PCI: CLS 64 bytes, default 64
[ 0.419630] Trying to unpack rootfs image as initramfs...
[ 0.421827] rootfs image is not initramfs (no cpio magic); looks like an
initrd
[ 0.423209] Freeing initrd memory: 1280k freed
[ 0.423485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.423545] Placing 64MB software IO TLB between ffff8800b94a1000 -
ffff8800bd4a1000
[ 0.423616] software IO TLB at phys 0xb94a1000 - 0xbd4a1000
[ 0.423688] Simple Boot Flag at 0x35 set to 0x1
[ 0.424657] audit: initializing netlink socket (disabled)
[ 0.424724] type=2000 audit(1309380898.420:1): initialized
[ 0.435638] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.458418] VFS: Disk quotas dquot_6.5.2
[ 0.458570] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.458737] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.458853] msgmni has been set to 7717
[ 0.459249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 0.459321] io scheduler noop registered
[ 0.459377] io scheduler deadline registered (default)
[ 0.459575] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.459626] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.459822] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.459870] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.460109] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.460157] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.460349] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.460397] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.460666] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.460730] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.460750] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.460811] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.460873] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.460893] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.460956] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.460976] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.461038] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.461162] intel_idle: MWAIT substates: 0x3122220
[ 0.461164] intel_idle: does not run on family 6 model 23
[ 0.461246] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.461495] ACPI: Lid Switch [LID]
[ 0.461622] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.461696] ACPI: Sleep Button [SLPB]
[ 0.461839] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.461910] ACPI: Power Button [PWRF]
[ 0.462010] ERST: Table is not found!
[ 0.492976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.592429] Linux agpgart interface v0.103
[ 0.592635] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 0.592819] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total,
262144K mappable
[ 0.594593] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.594859] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.595032] [drm] Initialized drm 1.1.0 20060810
[ 0.595133] [drm] radeon defaulting to userspace modesetting.
[ 0.596266] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.596327] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.596390] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.596452] i915 0000:00:02.0: setting latency timer to 64
[ 0.654698] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 0.654703] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.654765] [drm] Driver supports precise vblank timestamp query.
[ 0.654867] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.010422] fbcon: inteldrmfb (fb0) is primary device
[ 1.060795] Console: switching to colour frame buffer device 180x56
[ 1.064470] fb0: inteldrmfb frame buffer device
[ 1.064494] drm: registered panic notifier
[ 1.165732] acpi device:02: registered as cooling_device0
[ 1.165881] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.165932] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.166037] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor
0
[ 1.168150] brd: module loaded
[ 1.168280] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 1.177442] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.177496] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.177725] mousedev: PS/2 mouse device common for all mice
[ 1.177820] rtc_cmos 00:07: RTC can wake from S4
[ 1.177982] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.178042] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.178120] cpuidle: using governor ladder
[ 1.178144] cpuidle: using governor menu
[ 1.178379] TCP cubic registered
[ 1.178400] NET: Registered protocol family 17
[ 1.182844] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[ 1.189106] registered taskstats version 1
[ 1.199162] rtc_cmos 00:07: setting system clock to 2011-06-29 20:55:00 UTC
(1309380900)
[ 1.199366] RAMDISK: lzo image found at block 0
[ 1.214960] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[ 1.220628] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-devel@redhat.com
[ 1.223237] Intel AES-NI instructions are not detected.
[ 1.236585] SCSI subsystem initialized
[ 1.240970] libata version 3.00 loaded.
[ 1.242087] ahci 0000:00:1f.2: version 3.0
[ 1.242103] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.243578] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.243619] ahci: SSS flag set, parallel bus scan disabled
[ 1.245070] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3
impl SATA mode
[ 1.246519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio
slum part ccc sxs
[ 1.247960] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.248790] scsi0 : ahci
[ 1.250343] scsi1 : ahci
[ 1.251858] scsi2 : ahci
[ 1.253378] scsi3 : ahci
[ 1.255065] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100
irq 45
[ 1.256477] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180
irq 45
[ 1.257835] ata3: DUMMY
[ 1.259178] ata4: DUMMY
[ 1.420017] Refined TSC clocksource calibration: 2526.999 MHz.
[ 1.421384] Switching to clocksource tsc
[ 1.580018] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.592090] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.592093] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 1.593474] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.601143] ata1.00: ATA-8: OCZ-VERTEX2, 1.32, max UDMA/133
[ 1.602510] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.611142] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.611145] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 1.612532] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.621144] ata1.00: configured for UDMA/133
[ 1.622624] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.32
PQ: 0 ANSI: 5
[ 1.944016] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.947876] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.948966] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.948970] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.951435] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.D0, max UDMA/100
[ 1.955830] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 1.956911] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 1.956914] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 1.959377] ata2.00: configured for UDMA/100
[ 1.963094] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.D0
PQ: 0 ANSI: 5
[ 1.965748] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240
GB/223 GiB)
[ 1.967669] sd 0:0:0:0: [sda] Write Protect is off
[ 1.969094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.969113] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.971224] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.973151] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.993735] SGI XFS with ACLs, security attributes, large block/inode
numbers, no debug enabled
[ 1.995833] SGI XFS Quota Management subsystem
[ 6.460357] XFS (dm-0): Mounting Filesystem
[ 6.512395] XFS (dm-0): Ending clean mount
[ 6.513899] VFS: Mounted root (xfs filesystem) readonly on device 254:0.
[ 6.515390] Trying to move old root to /initrd ... okay
[ 6.517489] devtmpfs: mounted
[ 6.519899] Freeing unused kernel memory: 568k freed
[ 6.521553] Write protecting the kernel read-only data: 8192k
[ 6.529276] Freeing unused kernel memory: 1988k freed
[ 6.532266] Freeing unused kernel memory: 280k freed
[ 6.849859] usbcore: registered new interface driver usbfs
[ 6.849907] usbcore: registered new interface driver hub
[ 6.855001] usbcore: registered new device driver usb
[ 6.855060] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 6.855062] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.855093] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.855107] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.855245] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 6.857658] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.857661] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[ 6.861648] iTCO_vendor_support: vendor-support=0
[ 6.866049] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.866153] iTCO_wdt: Found a ICH9M-E TCO device (Version=2,
TCOBASE=0x1060)
[ 6.866307] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.875510] ACPI: acpi_idle registered with cpuidle
[ 6.880382] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.904369] Monitor-Mwait will be used to enter C-1 state
[ 6.905914] Monitor-Mwait will be used to enter C-2 state
[ 6.907374] Monitor-Mwait will be used to enter C-3 state
[ 6.907442] Marking TSC unstable due to TSC halts in idle
[ 6.908281] Switching to clocksource hpet
[ 6.919126] cfg80211: Calling CRDA to update world regulatory domain
[ 6.923014] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 6.927809] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.927812] ACPI: Thermal Zone [THM0] (50 C)
[ 6.941581] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-
tree:d
[ 6.941584] iwlagn: Copyright(c) 2003-2011 Intel Corporation
[ 6.941947] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.941957] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.941988] iwlagn 0000:03:00.0: Detected Intel(R) WiMAX/WiFi Link 5350
AGN, REV=0x24
[ 6.944413] wmi: Mapper loaded
[ 6.945243] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.945245] ACPI: Thermal Zone [THM1] (47 C)
[ 6.962046] Non-volatile memory driver v1.3
[ 6.973815] ACPI: Battery Slot [BAT0] (battery present)
[ 6.974378] ACPI: AC Adapter [AC] (on-line)
[ 6.979003] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.003532] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 7.003536] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.003651] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.027002] iwlagn 0000:03:00.0: device EEPROM VER=0x21e, CALIB=0x4
[ 7.027005] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 7.027007] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
[ 7.027019] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a
channels
[ 7.027526] iwlagn 0000:03:00.0: irq 47 for MSI/MSI-X
[ 7.027759] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 7.027761] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.027762] thinkpad_acpi: ThinkPad BIOS 7UET91WW (3.21 ), EC 7VHT16WW-1.06
[ 7.027764] thinkpad_acpi: Lenovo ThinkPad T400, model 2764CTO
[ 7.048369] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.048572] thinkpad_acpi: radio switch found; radios are enabled
[ 7.048874] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 7.048878] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 7.048884] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[io 0x4000-0x7fff]
[ 7.048887] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[mem 0xf4800000-0xf7ffffff]
[ 7.048890] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff
[ 7.048905] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window:
[mem 0xf0000000-0xf3ffffff 64bit pref]
[ 7.048907] pcmcia_socket pcmcia_socket0: cs: memory probe
0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff
[ 7.052372] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is
unblocked
[ 7.059421] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
[ 7.060067] sdhci: Secure Digital Host Controller Interface driver
[ 7.060069] sdhci: Copyright(c) Pierre Ossman
[ 7.061099] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 7.062885] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 7.063800] Registered led device: tpacpi::thinklight
[ 7.063836] Registered led device: tpacpi::power
[ 7.063851] Registered led device: tpacpi::standby
[ 7.063867] Registered led device: tpacpi::thinkvantage
[ 7.067144] thinkpad_acpi: Standard ACPI backlight interface available, not
loading native one
[ 7.067223] thinkpad_acpi: Console audio control enabled, mode: override
(read/write)
[ 7.069428] input: ThinkPad Extra Buttons as
/devices/platform/thinkpad_acpi/input/input6
[ 7.072163] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 7.072166] tpm_tis 00:0a: Intel iTPM workaround enabled
[ 7.074678] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1)
00:21:86:a2:19:06
[ 7.074681] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 7.074703] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 7.074723] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 7.074727] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 7.074735] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 7.074756] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 7.074760] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 7.074775] drivers/usb/core/inode.c: creating file 'devices'
[ 7.074778] drivers/usb/core/inode.c: creating file '001'
[ 7.074781] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 7.074792] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.074797] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr hw prefetch
[ 7.074825] ehci_hcd 0000:00:1a.7: debug port 1
[ 7.074830] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.078704] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 7.078706] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 7.078725] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 7.078729] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.082608] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.092053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 7.092098] usb usb1: default language 0x0409
[ 7.092104] usb usb1: udev 1, busnum 1, minor = 0
[ 7.092106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.092108] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.092110] usb usb1: Product: EHCI Host Controller
[ 7.092112] usb usb1: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd
[ 7.092114] usb usb1: SerialNumber: 0000:00:1a.7
[ 7.092218] usb usb1: usb_probe_device
[ 7.092220] usb usb1: configuration #1 chosen from 1 choice
[ 7.092228] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 7.092250] hub 1-0:1.0: usb_probe_interface
[ 7.092251] hub 1-0:1.0: usb_probe_interface - got id
[ 7.092254] hub 1-0:1.0: USB hub found
[ 7.092258] hub 1-0:1.0: 6 ports detected
[ 7.092259] hub 1-0:1.0: standalone hub
[ 7.092261] hub 1-0:1.0: no power switching (usb 1.0)
[ 7.092263] hub 1-0:1.0: individual port over-current protection
[ 7.092265] hub 1-0:1.0: power on to power good time: 20ms
[ 7.092268] hub 1-0:1.0: local power source is good
[ 7.092270] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 7.092319] drivers/usb/core/inode.c: creating file '001'
[ 7.092369] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.092374] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 7.092386] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 7.092412] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.092416] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.092421] drivers/usb/core/inode.c: creating file '002'
[ 7.092424] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 7.092433] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3
pcc=2 ordered !ppc ports=6
[ 7.092438] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes
1024 64 bit addr hw prefetch
[ 7.092688] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.092692] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.096858] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 7.096860] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 7.096877] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 7.096882] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8
period=1024 Reset HALT
[ 7.100766] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1
period=1024 RUN
[ 7.112019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.112039] usb usb2: default language 0x0409
[ 7.112045] usb usb2: udev 1, busnum 2, minor = 128
[ 7.112047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.112049] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.112051] usb usb2: Product: EHCI Host Controller
[ 7.112053] usb usb2: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f ehci_hcd
[ 7.112055] usb usb2: SerialNumber: 0000:00:1d.7
[ 7.112136] usb usb2: usb_probe_device
[ 7.112138] usb usb2: configuration #1 chosen from 1 choice
[ 7.112145] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 7.112171] hub 2-0:1.0: usb_probe_interface
[ 7.112172] hub 2-0:1.0: usb_probe_interface - got id
[ 7.112176] hub 2-0:1.0: USB hub found
[ 7.112180] hub 2-0:1.0: 6 ports detected
[ 7.112182] hub 2-0:1.0: standalone hub
[ 7.112183] hub 2-0:1.0: no power switching (usb 1.0)
[ 7.112185] hub 2-0:1.0: individual port over-current protection
[ 7.112187] hub 2-0:1.0: power on to power good time: 20ms
[ 7.112190] hub 2-0:1.0: local power source is good
[ 7.112192] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 7.112241] drivers/usb/core/inode.c: creating file '001'
[ 7.112423] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) ->
IRQ 23
[ 7.112597] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 7.112651] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 7.112679] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.124311] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4
IR + 4 IT contexts, quirks 0x1
[ 7.124499] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev
21)
[ 7.124514] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 7.125533] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 7.125552] mmc0: no vmmc regulator found
[ 7.126580] Registered led device: mmc0::
[ 7.127621] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 7.139381] Monitor-Mwait will be used to enter C-3 state
[ 7.189149] ALSA sound/pci/hda/hda_codec.c:3771 hda_codec: model 'laptop'
is selected
[ 7.189214] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 7.192042] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.192059] hub 1-0:1.0: port 1: status 0501 change 0001
[ 7.192073] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.192076] hub 1-0:1.0: port 4: status 0501 change 0001
[ 7.192086] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.192089] hub 1-0:1.0: port 6: status 0501 change 0001
[ 7.202828] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 7.202949] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 7.203012] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 7.212034] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 7.212039] hub 2-0:1.0: port 4: status 0501 change 0001
[ 7.212504] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.212557] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.212560] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 7.212568] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 7.212576] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 7.212580] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 7.212587] drivers/usb/core/inode.c: creating file '003'
[ 7.212592] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 7.212603] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 7.212608] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.212610] uhci_hcd 0000:00:1a.0: Performing full reset
[ 7.212624] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 7.212646] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 7.212684] usb usb3: default language 0x0409
[ 7.212690] usb usb3: udev 1, busnum 3, minor = 256
[ 7.212692] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.212694] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.212696] usb usb3: Product: UHCI Host Controller
[ 7.212698] usb usb3: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.212700] usb usb3: SerialNumber: 0000:00:1a.0
[ 7.212822] usb usb3: usb_probe_device
[ 7.212824] usb usb3: configuration #1 chosen from 1 choice
[ 7.212831] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 7.212853] hub 3-0:1.0: usb_probe_interface
[ 7.212855] hub 3-0:1.0: usb_probe_interface - got id
[ 7.212857] hub 3-0:1.0: USB hub found
[ 7.212861] hub 3-0:1.0: 2 ports detected
[ 7.212863] hub 3-0:1.0: standalone hub
[ 7.212864] hub 3-0:1.0: no power switching (usb 1.0)
[ 7.212866] hub 3-0:1.0: individual port over-current protection
[ 7.212868] hub 3-0:1.0: power on to power good time: 2ms
[ 7.212871] hub 3-0:1.0: local power source is good
[ 7.212873] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 7.212911] drivers/usb/core/inode.c: creating file '001'
[ 7.212942] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 7.212968] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 7.212974] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 7.212977] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 7.212982] drivers/usb/core/inode.c: creating file '004'
[ 7.212985] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 7.212994] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 7.212998] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.213000] uhci_hcd 0000:00:1a.1: Performing full reset
[ 7.213028] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 7.213066] usb usb4: default language 0x0409
[ 7.213071] usb usb4: udev 1, busnum 4, minor = 384
[ 7.213073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.213075] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.213077] usb usb4: Product: UHCI Host Controller
[ 7.213079] usb usb4: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.213080] usb usb4: SerialNumber: 0000:00:1a.1
[ 7.213143] usb usb4: usb_probe_device
[ 7.213145] usb usb4: configuration #1 chosen from 1 choice
[ 7.213151] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 7.250039] hub 4-0:1.0: usb_probe_interface
[ 7.250042] hub 4-0:1.0: usb_probe_interface - got id
[ 7.250045] hub 4-0:1.0: USB hub found
[ 7.250052] hub 4-0:1.0: 2 ports detected
[ 7.250054] hub 4-0:1.0: standalone hub
[ 7.250055] hub 4-0:1.0: no power switching (usb 1.0)
[ 7.250057] hub 4-0:1.0: individual port over-current protection
[ 7.250059] hub 4-0:1.0: power on to power good time: 2ms
[ 7.250062] hub 4-0:1.0: local power source is good
[ 7.250064] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 7.250110] drivers/usb/core/inode.c: creating file '001'
[ 7.250147] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1
[ 7.250177] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.250179] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 7.250192] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 7.250201] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 7.250205] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 7.250212] drivers/usb/core/inode.c: creating file '005'
[ 7.250217] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 7.250228] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 7.250233] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.250235] uhci_hcd 0000:00:1a.2: Performing full reset
[ 7.250250] uhci_hcd 0000:00:1a.2: supports USB remote wakeup
[ 7.250271] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 7.250310] usb usb5: default language 0x0409
[ 7.250316] usb usb5: udev 1, busnum 5, minor = 512
[ 7.250318] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.250320] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.250323] usb usb5: Product: UHCI Host Controller
[ 7.250324] usb usb5: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.250326] usb usb5: SerialNumber: 0000:00:1a.2
[ 7.250452] usb usb5: usb_probe_device
[ 7.250455] usb usb5: configuration #1 chosen from 1 choice
[ 7.250462] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 7.250482] hub 5-0:1.0: usb_probe_interface
[ 7.250483] hub 5-0:1.0: usb_probe_interface - got id
[ 7.250485] hub 5-0:1.0: USB hub found
[ 7.250489] hub 5-0:1.0: 2 ports detected
[ 7.250491] hub 5-0:1.0: standalone hub
[ 7.250492] hub 5-0:1.0: no power switching (usb 1.0)
[ 7.250494] hub 5-0:1.0: individual port over-current protection
[ 7.250495] hub 5-0:1.0: power on to power good time: 2ms
[ 7.250499] hub 5-0:1.0: local power source is good
[ 7.250501] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 7.250544] drivers/usb/core/inode.c: creating file '001'
[ 7.250574] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2
[ 7.250594] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.250596] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 7.250601] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 7.250608] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.250611] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.250616] drivers/usb/core/inode.c: creating file '006'
[ 7.250620] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 7.250629] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 7.250633] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.250635] uhci_hcd 0000:00:1d.0: Performing full reset
[ 7.250650] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 7.250655] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 7.250689] usb usb6: default language 0x0409
[ 7.250695] usb usb6: udev 1, busnum 6, minor = 640
[ 7.250697] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.250699] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.250701] usb usb6: Product: UHCI Host Controller
[ 7.250702] usb usb6: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.250704] usb usb6: SerialNumber: 0000:00:1d.0
[ 7.250767] usb usb6: usb_probe_device
[ 7.250770] usb usb6: configuration #1 chosen from 1 choice
[ 7.250775] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 7.250794] hub 6-0:1.0: usb_probe_interface
[ 7.250796] hub 6-0:1.0: usb_probe_interface - got id
[ 7.250798] hub 6-0:1.0: USB hub found
[ 7.250802] hub 6-0:1.0: 2 ports detected
[ 7.250803] hub 6-0:1.0: standalone hub
[ 7.250805] hub 6-0:1.0: no power switching (usb 1.0)
[ 7.250806] hub 6-0:1.0: individual port over-current protection
[ 7.250808] hub 6-0:1.0: power on to power good time: 2ms
[ 7.255547] hub 6-0:1.0: local power source is good
[ 7.255550] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 7.255599] drivers/usb/core/inode.c: creating file '001'
[ 7.255640] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 7.255663] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 7.255672] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.255675] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.255680] drivers/usb/core/inode.c: creating file '007'
[ 7.255687] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 7.255696] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 7.255700] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.255702] uhci_hcd 0000:00:1d.1: Performing full reset
[ 7.255721] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 7.255757] usb usb7: default language 0x0409
[ 7.255762] usb usb7: udev 1, busnum 7, minor = 768
[ 7.255764] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.255767] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.255769] usb usb7: Product: UHCI Host Controller
[ 7.255770] usb usb7: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.255772] usb usb7: SerialNumber: 0000:00:1d.1
[ 7.263268] usb usb7: usb_probe_device
[ 7.263272] usb usb7: configuration #1 chosen from 1 choice
[ 7.263283] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 7.263420] hub 7-0:1.0: usb_probe_interface
[ 7.263422] hub 7-0:1.0: usb_probe_interface - got id
[ 7.263425] hub 7-0:1.0: USB hub found
[ 7.263430] hub 7-0:1.0: 2 ports detected
[ 7.263431] hub 7-0:1.0: standalone hub
[ 7.263432] hub 7-0:1.0: no power switching (usb 1.0)
[ 7.263434] hub 7-0:1.0: individual port over-current protection
[ 7.263436] hub 7-0:1.0: power on to power good time: 2ms
[ 7.263439] hub 7-0:1.0: local power source is good
[ 7.263440] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 7.263500] drivers/usb/core/inode.c: creating file '001'
[ 7.263544] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[ 7.263570] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 7.263579] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.263582] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.263587] drivers/usb/core/inode.c: creating file '008'
[ 7.263682] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 7.263691] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 7.263696] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 7.263698] uhci_hcd 0000:00:1d.2: Performing full reset
[ 7.263722] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 7.263761] usb usb8: default language 0x0409
[ 7.263767] usb usb8: udev 1, busnum 8, minor = 896
[ 7.263769] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 7.263771] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 7.263772] usb usb8: Product: UHCI Host Controller
[ 7.263774] usb usb8: Manufacturer: Linux 3.0.0-rc5-00063-g0d72c6f uhci_hcd
[ 7.263775] usb usb8: SerialNumber: 0000:00:1d.2
[ 7.264388] usb usb8: usb_probe_device
[ 7.264390] usb usb8: configuration #1 chosen from 1 choice
[ 7.264396] usb usb8: adding 8-0:1.0 (config #1, interface 0)
[ 7.264442] hub 8-0:1.0: usb_probe_interface
[ 7.264444] hub 8-0:1.0: usb_probe_interface - got id
[ 7.264446] hub 8-0:1.0: USB hub found
[ 7.264449] hub 8-0:1.0: 2 ports detected
[ 7.264451] hub 8-0:1.0: standalone hub
[ 7.264452] hub 8-0:1.0: no power switching (usb 1.0)
[ 7.264453] hub 8-0:1.0: individual port over-current protection
[ 7.264455] hub 8-0:1.0: power on to power good time: 2ms
[ 7.264458] hub 8-0:1.0: local power source is good
[ 7.264459] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 7.264525] drivers/usb/core/inode.c: creating file '001'
[ 7.264977] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[ 7.302029] hub 1-0:1.0: state 7 ports 6 chg 0052 evt 0000
[ 7.302039] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 7.313470] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00
[ 7.317291] iwlagn 0000:03:00.0: loaded firmware version 8.83.5.1 build
33692
[ 7.317667] Registered led device: phy0-led
[ 7.331286] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.348148] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00
[ 7.348170] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00
[ 7.352374] udevd[1440]: renamed network interface wlan0 to eth1
[ 7.356262] ehci_hcd 0000:00:1a.7: port 1 full speed --> companion
[ 7.356648] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 7.356674] hub 1-0:1.0: port 1 not reset yet, waiting 50ms
[ 7.367725] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00
[ 7.416098] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 7.416131] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 7.472263] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 7.472268] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 7.472272] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[ 7.528056] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 7.528078] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 7.584259] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 7.584263] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.624176] firewire_core: created device fw0: GUID 00061b032a347baa, S400
[ 7.640056] usb 1-6: new high speed USB device number 4 using ehci_hcd
[ 7.696260] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 7.696264] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.750156] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps:
0xd04791/0xb00000/0x20000
[ 7.750161] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 7.779796] usb 1-6: skipped 1 descriptor after configuration
[ 7.779799] usb 1-6: skipped 5 descriptors after interface
[ 7.779802] usb 1-6: skipped 1 descriptor after endpoint
[ 7.779804] usb 1-6: skipped 9 descriptors after interface
[ 7.780168] usb 1-6: default language 0x0409
[ 7.784041] usb 1-6: udev 4, busnum 1, minor = 3
[ 7.784043] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004
[ 7.784045] usb 1-6: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 7.784047] usb 1-6: Product: Integrated Camera
[ 7.784049] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd.
[ 7.784051] usb 1-6: SerialNumber: SN0001
[ 7.784123] usb 1-6: usb_probe_device
[ 7.784126] usb 1-6: configuration #1 chosen from 1 choice
[ 7.784419] usb 1-6: adding 1-6:1.0 (config #1, interface 0)
[ 7.785691] usb 1-6: adding 1-6:1.1 (config #1, interface 1)
[ 7.785740] drivers/usb/core/inode.c: creating file '004'
[ 7.785758] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 7.785765] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[ 7.789822] Linux media interface: v0.10
[ 7.794152] Linux video capture interface: v2.00
[ 7.794856] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input11
[ 7.797003] uvcvideo 1-6:1.0: usb_probe_interface
[ 7.797006] uvcvideo 1-6:1.0: usb_probe_interface - got id
[ 7.797028] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004)
[ 7.833766] input: Integrated Camera as
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
[ 7.833831] usbcore: registered new interface driver uvcvideo
[ 7.833833] USB Video Class driver (v1.1.0)
[ 7.835196] usb 1-6: link qh4-0001/ffff880133fd5f00 start 1 [1/0 us]
[ 7.835235] usb 1-6: unlink qh4-0001/ffff880133fd5f00 start 1 [1/0 us]
[ 7.840293] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 7.840297] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 7.896068] usb 2-4: new high speed USB device number 2 using ehci_hcd
[ 7.956293] ehci_hcd 0000:00:1d.7: port 4 high speed
[ 7.956297] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 8.093838] usb 2-4: skipped 3 descriptors after interface
[ 8.093842] usb 2-4: skipped 4 descriptors after interface
[ 8.093845] usb 2-4: skipped 4 descriptors after interface
[ 8.093847] usb 2-4: skipped 2 descriptors after interface
[ 8.093850] usb 2-4: skipped 2 descriptors after interface
[ 8.093852] usb 2-4: skipped 5 descriptors after interface
[ 8.093855] usb 2-4: skipped 4 descriptors after interface
[ 8.102586] usb 2-4: skipped 3 descriptors after interface
[ 8.102588] usb 2-4: skipped 4 descriptors after interface
[ 8.102590] usb 2-4: skipped 4 descriptors after interface
[ 8.102593] usb 2-4: skipped 2 descriptors after interface
[ 8.102595] usb 2-4: skipped 2 descriptors after interface
[ 8.102598] usb 2-4: skipped 5 descriptors after interface
[ 8.102701] usb 2-4: default language 0x0409
[ 8.106833] usb 2-4: udev 2, busnum 2, minor = 129
[ 8.106836] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 8.106838] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 8.106840] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard
Composite Device
[ 8.106842] usb 2-4: Manufacturer: Ericsson
[ 8.106844] usb 2-4: SerialNumber: 3541430228088360
[ 8.106968] usb 2-4: usb_probe_device
[ 8.106971] usb 2-4: configuration #1 chosen from 2 choices
[ 8.109696] usb 2-4: adding 2-4:1.0 (config #1, interface 0)
[ 8.109943] usb 2-4: adding 2-4:1.1 (config #1, interface 1)
[ 8.129231] usb 2-4: adding 2-4:1.2 (config #1, interface 2)
[ 8.131618] usb 2-4: adding 2-4:1.3 (config #1, interface 3)
[ 8.133737] usb 2-4: adding 2-4:1.4 (config #1, interface 4)
[ 8.135730] usb 2-4: adding 2-4:1.5 (config #1, interface 5)
[ 8.137730] usb 2-4: adding 2-4:1.6 (config #1, interface 6)
[ 8.139720] usb 2-4: adding 2-4:1.7 (config #1, interface 7)
[ 8.141726] usb 2-4: adding 2-4:1.8 (config #1, interface 8)
[ 8.143719] usb 2-4: adding 2-4:1.9 (config #1, interface 9)
[ 8.145727] usb 2-4: adding 2-4:1.10 (config #1, interface 10)
[ 8.147645] drivers/usb/core/inode.c: creating file '002'
[ 8.147669] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.147675] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
[ 8.147682] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.147686] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 8.147694] uhci_hcd 0000:00:1a.0: port 1 portsc 0093,00
[ 8.147700] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[ 8.153997] cdc_wdm 2-4:1.5: usb_probe_interface
[ 8.154001] cdc_wdm 2-4:1.5: usb_probe_interface - got id
[ 8.154026] cdc_wdm 2-4:1.5: looking for a minor, starting at 0
[ 8.154113] cdc_wdm 2-4:1.5: cdc-wdm-176: USB WDM device
[ 8.154119] cdc_wdm 2-4:1.6: usb_probe_interface
[ 8.154121] cdc_wdm 2-4:1.6: usb_probe_interface - got id
[ 8.154125] cdc_wdm 2-4:1.6: looking for a minor, starting at 0
[ 8.154161] cdc_wdm 2-4:1.6: cdc-wdm-175: USB WDM device
[ 8.154176] usbcore: registered new interface driver cdc_wdm
[ 8.156474] cdc_acm 2-4:1.1: usb_probe_interface
[ 8.156477] cdc_acm 2-4:1.1: usb_probe_interface - got id
[ 8.156594] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 8.158130] cdc_acm 2-4:1.3: usb_probe_interface
[ 8.158134] cdc_acm 2-4:1.3: usb_probe_interface - got id
[ 8.158261] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 8.158883] cdc_acm 2-4:1.9: usb_probe_interface
[ 8.158886] cdc_acm 2-4:1.9: usb_probe_interface - got id
[ 8.159005] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 8.159365] usbcore: registered new interface driver cdc_acm
[ 8.159367] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 8.161865] cdc_ether 2-4:1.7: usb_probe_interface
[ 8.161867] cdc_ether 2-4:1.7: usb_probe_interface - got id
[ 8.165545] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at
usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 8.165566] usbcore: registered new interface driver cdc_ether
[ 8.166482] usbcore: registered new interface driver zaurus
[ 8.272078] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status
0x101
[ 8.336041] usb usb6: suspend_rh (auto-stop)
[ 8.336068] usb usb8: suspend_rh (auto-stop)
[ 8.384038] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 8.516035] usb 3-1: ep0 maxpacket = 8
[ 8.548712] usb 3-1: skipped 1 descriptor after interface
[ 8.548715] usb 3-1: skipped 1 descriptor after interface
[ 8.548717] usb 3-1: skipped 1 descriptor after interface
[ 8.552689] usb 3-1: default language 0x0409
[ 8.567688] usb 3-1: udev 2, busnum 3, minor = 257
[ 8.567690] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[ 8.567693] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 8.567694] usb 3-1: Product: USB Receiver
[ 8.567696] usb 3-1: Manufacturer: Logitech
[ 8.567803] usb 3-1: usb_probe_device
[ 8.567807] usb 3-1: configuration #1 chosen from 1 choice
[ 8.572711] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 8.572749] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 8.572779] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
[ 8.572835] drivers/usb/core/inode.c: creating file '002'
[ 8.572863] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 8.572872] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 8.572879] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 8.580963] usbhid 3-1:1.0: usb_probe_interface
[ 8.580966] usbhid 3-1:1.0: usb_probe_interface - got id
[ 8.582908] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input13
[ 8.582918] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase
4, 17 us
[ 8.583044] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11
Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 8.583051] usbhid 3-1:1.1: usb_probe_interface
[ 8.583053] usbhid 3-1:1.1: usb_probe_interface - got id
[ 8.584053] usb usb7: suspend_rh (auto-stop)
[ 8.584059] usb usb5: suspend_rh (auto-stop)
[ 8.586065] input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input14
[ 8.586070] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 2, phase
1, 17 us
[ 8.586154] usbhid 3-1:1.1: looking for a minor, starting at 0
[ 8.586235] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID
v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 8.586242] usbhid 3-1:1.2: usb_probe_interface
[ 8.586244] usbhid 3-1:1.2: usb_probe_interface - got id
[ 8.591717] usbhid 3-1:1.2: looking for a minor, starting at 0
[ 8.591791] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11
Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[ 8.591804] usbcore: registered new interface driver usbhid
[ 8.591806] usbhid: USB HID core driver
[ 8.704084] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status
0x101
[ 8.817563] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 8.972095] usb 4-2: skipped 1 descriptor after interface
[ 8.975095] usb 4-2: default language 0x0409
[ 8.986091] usb 4-2: udev 2, busnum 4, minor = 385
[ 8.986093] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 8.986095] usb 4-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 8.986097] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 8.986099] usb 4-2: Manufacturer: Lenovo Computer Corp
[ 8.986206] usb 4-2: usb_probe_device
[ 8.986210] usb 4-2: configuration #1 chosen from 1 choice
[ 8.988097] usb 4-2: adding 4-2:1.0 (config #1, interface 0)
[ 8.988149] usb 4-2: adding 4-2:1.1 (config #1, interface 1)
[ 8.988188] usb 4-2: adding 4-2:1.2 (config #1, interface 2)
[ 8.988227] usb 4-2: adding 4-2:1.3 (config #1, interface 3)
[ 8.988294] drivers/usb/core/inode.c: creating file '002'
[ 8.988315] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.988321] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 8.988325] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
[ 9.000297] Bluetooth: Core ver 2.16
[ 9.002074] NET: Registered protocol family 31
[ 9.002076] Bluetooth: HCI device and connection manager initialized
[ 9.002078] Bluetooth: HCI socket layer initialized
[ 9.002080] Bluetooth: L2CAP socket layer initialized
[ 9.003463] Bluetooth: SCO socket layer initialized
[ 9.005897] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9.005930] btusb 4-2:1.0: usb_probe_interface
[ 9.005933] btusb 4-2:1.0: usb_probe_interface - got id
[ 9.006103] btusb 4-2:1.2: usb_probe_interface
[ 9.006105] btusb 4-2:1.2: usb_probe_interface - got id
[ 9.006113] btusb 4-2:1.3: usb_probe_interface
[ 9.006115] btusb 4-2:1.3: usb_probe_interface - got id
[ 9.006127] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 9.006132] usbcore: registered new interface driver btusb
[ 9.832049] usb 1-6: usb auto-suspend
[ 10.031403] NET: Registered protocol family 10
[ 10.178541] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.232152] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 10.233455] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.808105] hub 6-0:1.0: hub_suspend
[ 10.808123] usb usb6: bus auto-suspend
[ 10.808129] usb usb6: suspend_rh
[ 10.808157] hub 8-0:1.0: hub_suspend
[ 10.808166] usb usb8: bus auto-suspend
[ 10.808171] usb usb8: suspend_rh
[ 10.988082] hub 5-0:1.0: hub_suspend
[ 10.988095] usb usb5: bus auto-suspend
[ 10.988101] usb usb5: suspend_rh
[ 10.988126] hub 7-0:1.0: hub_suspend
[ 10.988135] usb usb7: bus auto-suspend
[ 10.988140] usb usb7: suspend_rh
[ 11.089108] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 11.848039] hub 1-0:1.0: hub_suspend
[ 11.848055] usb usb1: bus auto-suspend
[ 11.848061] ehci_hcd 0000:00:1a.7: suspend root hub
[ 13.513923] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 13.753421] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input15
[ 14.334018] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.537999] eth1: authenticate with 00:27:19:d8:98:f2 (try 1)
[ 17.541158] eth1: authenticated
[ 17.558218] eth1: associate with 00:27:19:d8:98:f2 (try 1)
[ 17.564325] eth1: RX AssocResp from 00:27:19:d8:98:f2 (capab=0x431 status=0
aid=2)
[ 17.564333] eth1: associated
[ 17.582166] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 24.484769] ------------[ cut here ]------------
[ 24.484777] WARNING: at kernel/printk.c:322 do_syslog+0x89/0x438()
[ 24.484779] Hardware name: 2764CTO
[ 24.484780] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG
(deprecated).
[ 24.484782] Modules linked in: sch_sfq ipv6 ext2 mbcache md_mod
acpi_cpufreq mperf btusb bluetooth crc16 usbhid hid zaurus cdc_ether usbnet
mii cdc_acm cdc_wdm uvcvideo joydev videodev v4l2_compat_ioctl32 media arc4
uhci_hcd snd_hda_codec_conexant sdhci_pci pcmcia firewire_ohci sdhci mmc_core
firewire_core tpm_tis sg thinkpad_acpi sr_mod tpm crc_itu_t tpm_bios nvram
cdrom ac battery iwlagn wmi psmouse serio_raw mac80211 evdev thermal
yenta_socket pcmcia_rsrc pcmcia_core cfg80211 rfkill snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm pcspkr i2c_i801 processor snd_timer snd
soundcore iTCO_wdt snd_page_alloc iTCO_vendor_support ehci_hcd e1000e usbcore
xfs sd_mod crc_t10dif ahci libahci libata scsi_mod cbc cryptd aes_x86_64
aes_generic dm_crypt dm_mod [last unloaded: scsi_wait_scan]
[ 24.484840] Pid: 2705, comm: syslog-ng Not tainted 3.0.0-rc5-00063-g0d72c6f
#7
[ 24.484842] Call Trace:
[ 24.484845] [<ffffffff8103aa14>] warn_slowpath_common+0x7e/0x96
[ 24.484848] [<ffffffff8103aac0>] warn_slowpath_fmt+0x41/0x43
[ 24.484851] [<ffffffff81043da1>] ? ns_capable+0x35/0x4a
[ 24.484854] [<ffffffff8103b060>] do_syslog+0x89/0x438
[ 24.484857] [<ffffffff81103d9c>] ? _d_rehash+0x44/0x46
[ 24.484860] [<ffffffff81103dc4>] ? d_rehash+0x26/0x2b
[ 24.484863] [<ffffffff81143c6f>] kmsg_open+0x17/0x19
[ 24.484866] [<ffffffff8113afe4>] proc_reg_open+0xab/0x148
[ 24.484869] [<ffffffff81143c58>] ? kmsg_release+0x18/0x18
[ 24.484871] [<ffffffff81143c40>] ? seq_open_net+0x76/0x76
[ 24.484874] [<ffffffff8113af39>] ? proc_alloc_inode+0x9c/0x9c
[ 24.484878] [<ffffffff810f1372>] __dentry_open+0x1fb/0x312
[ 24.484881] [<ffffffff810fc9c3>] ? do_lookup+0x240/0x298
[ 24.484883] [<ffffffff810f2337>] nameidata_to_filp+0x5b/0x62
[ 24.484886] [<ffffffff810fe2d2>] do_last+0x5c4/0x725
[ 24.484889] [<ffffffff810fefa7>] path_openat+0xc3/0x368
[ 24.484892] [<ffffffff8108b7e3>] ? call_rcu+0x10/0x12
[ 24.484894] [<ffffffff810fc077>] ? putname+0x2d/0x36
[ 24.484897] [<ffffffff810ff27f>] do_filp_open+0x33/0x81
[ 24.484900] [<ffffffff811091ac>] ? alloc_fd+0x104/0x116
[ 24.484903] [<ffffffff810f243d>] do_sys_open+0xff/0x191
[ 24.484906] [<ffffffff810f24ea>] sys_open+0x1b/0x1d
[ 24.484910] [<ffffffff81405d3b>] system_call_fastpath+0x16/0x1b
[ 24.484912] ---[ end trace fb9b2637d8efb238 ]---
[ 24.514624] auditd (2717): /proc/2717/oom_adj is deprecated, please use
/proc/2717/oom_score_adj instead.
[ 24.934853] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.934856] Bluetooth: BNEP filters: protocol multicast
[ 24.959369] Bluetooth: RFCOMM TTY layer initialized
[ 24.959373] Bluetooth: RFCOMM socket layer initialized
[ 24.959375] Bluetooth: RFCOMM ver 1.11
[ 25.713397] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 26.484040] iwlagn 0000:03:00.0: iwlagn_tx_agg_start on ra =
00:27:19:d8:98:f2 tid = 0
[ 27.952073] eth1: no IPv6 routers present
[ 35.782932] ata1.00: configured for UDMA/133
[ 35.782935] ata1: EH complete
[ 70.473024] PM: Syncing filesystems ... done.
[ 71.182076] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 71.196114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[ 71.212235] Suspending console(s) (use no_console_suspend to debug)
[ 71.214368] usb 2-4: usb suspend
[ 71.215664] uhci_hcd 0000:00:1a.0: release dev 2 ep82-INT, period 2, phase
1, 17 us
[ 71.216051] uhci_hcd 0000:00:1a.1: release dev 2 ep81-INT, period 1, phase
0, 23 us
[ 71.216636] uhci_hcd 0000:00:1a.0: release dev 2 ep81-INT, period 8, phase
4, 17 us
[ 71.218043] usb 4-2: usb suspend
[ 71.218651] usb 3-1: usb suspend
[ 71.373252] hub 4-0:1.0: hub_suspend
[ 71.373263] usb usb4: bus suspend
[ 71.373268] usb usb4: suspend_rh
[ 71.373305] hub 3-0:1.0: hub_suspend
[ 71.373313] usb usb3: bus suspend
[ 71.373317] usb usb3: suspend_rh
[ 71.373350] hub 2-0:1.0: hub_suspend
[ 71.373357] usb usb2: bus suspend
[ 71.373363] ehci_hcd 0000:00:1d.7: suspend root hub
[ 71.373721] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 71.373793] sd 0:0:0:0: [sda] Stopping disk
[ 71.457255] ACPI handle has no context!
[ 71.457272] sdhci-pci 0000:15:00.2: PCI INT C disabled
[ 71.457284] ACPI handle has no context!
[ 71.457393] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 71.457405] uhci_hcd 0000:00:1d.2: uhci_pci_suspend
[ 71.457424] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 71.457432] uhci_hcd 0000:00:1d.1: uhci_pci_suspend
[ 71.457449] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 71.457457] uhci_hcd 0000:00:1d.0: uhci_pci_suspend
[ 71.457473] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 71.457576] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[ 71.457584] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 71.457592] uhci_hcd 0000:00:1a.2: uhci_pci_suspend
[ 71.457610] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[ 71.457618] uhci_hcd 0000:00:1a.1: uhci_pci_suspend
[ 71.457635] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 71.457642] uhci_hcd 0000:00:1a.0: uhci_pci_suspend
[ 71.457659] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 71.464090] ACPI handle has no context!
[ 71.472082] i915 0000:00:02.0: power state changed by ACPI to D3
[ 71.552504] e1000e 0000:00:19.0: PCI INT A disabled
[ 71.552518] e1000e 0000:00:19.0: PME# enabled
[ 71.552535] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 71.568091] PM: suspend of devices complete after 354.027 msecs
[ 71.584201] ehci_hcd 0000:00:1d.7: wakeup: 0
[ 71.600054] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 71.600063] ehci_hcd 0000:00:1d.7: --> PCI D3hot
[ 71.600111] uhci_hcd 0000:00:1d.2: wakeup: 0
[ 71.600118] uhci_hcd 0000:00:1d.2: --> PCI D0
[ 71.600165] uhci_hcd 0000:00:1d.1: wakeup: 0
[ 71.600172] uhci_hcd 0000:00:1d.1: --> PCI D0
[ 71.600218] uhci_hcd 0000:00:1d.0: wakeup: 0
[ 71.600236] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 71.600241] uhci_hcd 0000:00:1d.0: --> PCI D3hot
[ 71.600300] ehci_hcd 0000:00:1a.7: wakeup: 0
[ 71.616050] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[ 71.616059] ehci_hcd 0000:00:1a.7: --> PCI D3hot
[ 71.616106] uhci_hcd 0000:00:1a.2: wakeup: 0
[ 71.616123] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[ 71.616129] uhci_hcd 0000:00:1a.2: --> PCI D3hot
[ 71.616176] uhci_hcd 0000:00:1a.1: wakeup: 0
[ 71.616182] uhci_hcd 0000:00:1a.1: --> PCI D0
[ 71.616229] uhci_hcd 0000:00:1a.0: wakeup: 0
[ 71.636057] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 71.636063] uhci_hcd 0000:00:1a.0: --> PCI D3hot
[ 71.636195] PM: late suspend of devices complete after 68.095 msecs
[ 71.638253] ACPI: Preparing to enter system sleep state S3
[ 71.796094] PM: Saving platform NVS memory
[ 71.806249] Disabling non-boot CPUs ...
[ 71.806696] Broke affinity for irq 9
[ 71.806708] Broke affinity for irq 12
[ 71.806727] Broke affinity for irq 17
[ 71.967421] CPU 1 is now offline
[ 71.968148] Extended CMOS year: 2000
[ 71.968148] ACPI: Low-level resume complete
[ 71.968148] PM: Restoring platform NVS memory
[ 71.968148] Extended CMOS year: 2000
[ 71.968148] Enabling non-boot CPUs ...
[ 71.976326] Booting Node 0 Processor 1 APIC 0x1
[ 71.976328] smpboot cpu 1: start_ip = 99000
[ 71.807837] Disabled fast string operations
[ 72.068121] Switched to NOHz mode on CPU #1
[ 72.100754] CPU1 is up
[ 72.102589] ACPI: Waking up from system sleep state S3
[ 72.672227] i915 0000:00:02.0: restoring config space at offset 0x1 (was
0x900007, writing 0x900407)
[ 72.672285] pci 0000:00:02.1: restoring config space at offset 0x1 (was
0x900000, writing 0x900007)
[ 72.672312] pci 0000:00:03.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[ 72.672338] pci 0000:00:03.0: restoring config space at offset 0x1 (was
0x100006, writing 0x180006)
[ 72.692056] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692066] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692113] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.692137] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692144] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.692194] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.692219] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692226] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692273] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.692294] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692301] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.692360] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 72.692392] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.692402] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.692466] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1
(was 0x100106, writing 0x100102)
[ 72.692530] pcieport 0000:00:1c.0: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc051c041)
[ 72.692542] pcieport 0000:00:1c.0: restoring config space at offset 0x8
(was 0xfff0, writing 0xc030c020)
[ 72.692553] pcieport 0000:00:1c.0: restoring config space at offset 0x7
(was 0xf0, writing 0x9090)
[ 72.692575] pcieport 0000:00:1c.0: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692667] pcieport 0000:00:1c.1: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc011c001)
[ 72.692681] pcieport 0000:00:1c.1: restoring config space at offset 0x7
(was 0x200000f0, writing 0x8080)
[ 72.692703] pcieport 0000:00:1c.1: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692810] pcieport 0000:00:1c.3: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692917] pcieport 0000:00:1c.4: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[ 72.692977] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.692984] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.693030] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.693052] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.693059] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.693108] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.693171] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[ 72.693244] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[ 72.693276] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.693286] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.693467] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00007, writing 0x2b00407)
[ 72.708059] firewire_ohci 0000:15:00.1: BAR 0: set to [mem
0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff])
[ 72.708113] firewire_ohci 0000:15:00.1: restoring config space at offset
0x3 (was 0x800000, writing 0x802010)
[ 72.708128] firewire_ohci 0000:15:00.1: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
[ 72.724055] sdhci-pci 0000:15:00.2: BAR 0: set to [mem
0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff])
[ 72.724108] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3
(was 0x800000, writing 0x802010)
[ 72.724123] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1
(was 0x2100000, writing 0x2100106)
[ 72.725120] PM: early resume of devices complete after 53.043 msecs
[ 72.725317] i915 0000:00:02.0: power state changed by ACPI to D0
[ 72.725329] i915 0000:00:02.0: power state changed by ACPI to D0
[ 72.725385] i915 0000:00:02.0: setting latency timer to 64
[ 72.725689] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 72.725700] e1000e 0000:00:19.0: PME# disabled
[ 72.725820] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 72.727986] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.727994] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 72.728035] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[ 72.728048] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 72.728057] uhci_hcd 0000:00:1a.0: uhci_pci_resume
[ 72.728065] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00
[ 72.728071] uhci_hcd 0000:00:1a.0: Performing full reset
[ 72.728103] usb usb3: root hub lost power or was reset
[ 72.728129] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[ 72.728141] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 72.728149] uhci_hcd 0000:00:1a.1: uhci_pci_resume
[ 72.728156] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728162] uhci_hcd 0000:00:1a.1: Performing full reset
[ 72.728192] usb usb4: root hub lost power or was reset
[ 72.728211] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.728218] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 72.728228] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[ 72.728240] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 72.728248] uhci_hcd 0000:00:1a.2: uhci_pci_resume
[ 72.728255] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728260] uhci_hcd 0000:00:1a.2: Performing full reset
[ 72.728290] usb usb5: root hub lost power or was reset
[ 72.728312] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.728322] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 72.728335] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[ 72.728347] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 72.728437] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 72.728454] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 72.728518] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 72.728621] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.728628] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 72.728639] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 72.728651] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 72.728659] uhci_hcd 0000:00:1d.0: uhci_pci_resume
[ 72.728666] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00
[ 72.728672] uhci_hcd 0000:00:1d.0: Performing full reset
[ 72.728702] usb usb6: root hub lost power or was reset
[ 72.728724] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 72.728736] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 72.728743] uhci_hcd 0000:00:1d.1: uhci_pci_resume
[ 72.728751] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728756] uhci_hcd 0000:00:1d.1: Performing full reset
[ 72.728786] usb usb7: root hub lost power or was reset
[ 72.728807] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 72.728820] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 72.728827] uhci_hcd 0000:00:1d.2: uhci_pci_resume
[ 72.728835] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000
[ 72.728840] uhci_hcd 0000:00:1d.2: Performing full reset
[ 72.728870] usb usb8: root hub lost power or was reset
[ 72.728891] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.728901] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 72.728914] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[ 72.728926] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 72.729008] pci 0000:00:1e.0: setting latency timer to 64
[ 72.729036] ahci 0000:00:1f.2: setting latency timer to 64
[ 72.729151] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[ 72.729159] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[ 72.730227] sd 0:0:0:0: [sda] Starting disk
[ 72.730330] usb usb1: usb resume
[ 72.730338] ehci_hcd 0000:00:1a.7: resume root hub
[ 72.730466] usb usb2: usb resume
[ 72.730472] ehci_hcd 0000:00:1d.7: resume root hub
[ 72.730580] usb usb3: usb resume
[ 72.730582] usb usb3: wakeup_rh
[ 72.730663] usb usb4: usb resume
[ 72.730664] usb usb4: wakeup_rh
[ 72.730742] usb usb5: usb resume
[ 72.730743] usb usb5: wakeup_rh
[ 72.730825] usb usb6: usb resume
[ 72.730826] usb usb6: wakeup_rh
[ 72.730895] usb usb7: usb resume
[ 72.730896] usb usb7: wakeup_rh
[ 72.730976] usb usb8: usb resume
[ 72.730978] usb usb8: wakeup_rh
[ 72.744069] hub 3-0:1.0: hub_reset_resume
[ 72.744077] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 72.744097] hub 4-0:1.0: hub_reset_resume
[ 72.744103] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 72.744115] hub 5-0:1.0: hub_reset_resume
[ 72.744120] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 72.744133] hub 6-0:1.0: hub_reset_resume
[ 72.744138] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 72.744150] hub 7-0:1.0: hub_reset_resume
[ 72.744155] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 72.744168] hub 8-0:1.0: hub_reset_resume
[ 72.744174] hub 8-0:1.0: trying to enable port power on non-switchable hub
[ 72.744877] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[ 72.744879] PM: Device 00:0a failed to resume: error -19
[ 72.756043] hub 2-0:1.0: hub_resume
[ 72.756057] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 72.756060] hub 2-0:1.0: port 4: status 0100 change 0001
[ 72.784150] firewire_core: skipped bus generations, destroying all nodes
[ 72.826917] Extended CMOS year: 2000
[ 72.848107] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
[ 72.848117] hub 3-0:1.0: port 1: status 0100 change 0003
[ 72.848160] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00
[ 72.848167] hub 4-0:1.0: port 2: status 0100 change 0003
[ 72.860143] hub 2-0:1.0: port 4 status 0000.0100 after resume, -19
[ 72.860149] usb 2-4: can't resume, status -19
[ 72.860154] hub 2-0:1.0: logical disconnect on port 4
[ 72.860314] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion
[ 72.860327] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK
POWER OWNER sig=j CONNECT
[ 72.860567] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001800 0 ACK
POWER sig=j
[ 72.860575] ehci_hcd 0000:00:1a.7: failed handover port 1: 1800
[ 72.876091] hub 1-0:1.0: hub_resume
[ 72.876106] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 72.876116] hub 1-0:1.0: port 1: status 0501 change 0001
[ 72.876142] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK
POWER OWNER sig=se0 CSC
[ 72.876165] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK
POWER sig=j CSC CONNECT
[ 72.876173] hub 1-0:1.0: port 6: status 0501 change 0001
[ 72.980142] usb 1-6: finish reset-resume
[ 72.980176] hub 3-0:1.0: port 1 status 0000.0100 after resume, -19
[ 72.980186] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00
[ 72.980193] usb 3-1: can't resume, status -19
[ 72.980198] hub 3-0:1.0: logical disconnect on port 1
[ 72.980205] usb 4-2: finish reset-resume
[ 73.036277] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 73.036289] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 73.048114] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 73.051002] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 73.052064] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 73.052074] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.052106] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 73.056601] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 73.057679] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 73.057688] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.058699] ata2.00: configured for UDMA/100
[ 73.092084] usb 1-6: reset high speed USB device number 4 using ehci_hcd
[ 73.148333] ehci_hcd 0000:00:1a.7: port 6 high speed
[ 73.148346] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 73.284116] firewire_core: rediscovered device fw0
[ 73.336109] usb 4-2: reset full speed USB device number 2 using uhci_hcd
[ 73.365888] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 73.365898] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 73.365907] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.487102] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 73.487110] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 73.487116] btusb 4-2:1.0: forced unbind
[ 73.506115] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 73.506124] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[ 73.506133] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[ 73.566128] ata1.00: configured for UDMA/133
[ 73.614324] thinkpad_acpi: restoring fan level to 0x07
[ 73.807331] PM: resume of devices complete after 1082.079 msecs
[ 73.807378] btusb 4-2:1.0: usb_probe_interface
[ 73.807384] btusb 4-2:1.0: usb_probe_interface - got id
[ 73.808033] usb usb6: suspend_rh (auto-stop)
[ 73.808067] usb usb8: suspend_rh (auto-stop)
[ 73.808098] usb usb5: suspend_rh (auto-stop)
[ 73.808128] usb usb7: suspend_rh (auto-stop)
[ 73.808645] Restarting tasks ...
[ 73.809723] uhci_hcd 0000:00:1a.1: reserve dev 2 ep81-INT, period 1, phase
0, 23 us
[ 73.809794] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809810] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809820] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809830] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 73.809840] hub 2-0:1.0: state 7 ports 6 chg 0010 evt 0000
[ 73.809856] hub 2-0:1.0: port 4, status 0100, change 0000, 12 Mb/s
[ 73.809863] usb 2-4: USB disconnect, device number 2
[ 73.809868] usb 2-4: unregistering device
[ 73.809874] usb 2-4: unregistering interface 2-4:1.0
[ 73.809956] usb 2-4: unregistering interface 2-4:1.1
[ 73.810598] usb 2-4: unregistering interface 2-4:1.2
[ 73.810692] usb 2-4: unregistering interface 2-4:1.3
[ 73.811085] usb 2-4: unregistering interface 2-4:1.4
[ 73.811180] usb 2-4: unregistering interface 2-4:1.5
[ 73.811231] drivers/usb/core/file.c: removing 0 minor
[ 73.811364] usb 2-4: unregistering interface 2-4:1.6
[ 73.811412] drivers/usb/core/file.c: removing 1 minor
[ 73.811538] usb 2-4: unregistering interface 2-4:1.7
[ 73.811594] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether'
usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 73.823457] done.
[ 73.823470] video LNXVIDEO:00: Restoring backlight state
[ 74.056070] usb usb3: suspend_rh (auto-stop)
[ 75.808106] hub 5-0:1.0: hub_suspend
[ 75.808119] usb usb5: bus auto-suspend
[ 75.808122] usb usb5: suspend_rh
[ 75.808415] hub 6-0:1.0: hub_suspend
[ 75.808420] usb usb6: bus auto-suspend
[ 75.808423] usb usb6: suspend_rh
[ 75.808442] hub 7-0:1.0: hub_suspend
[ 75.808446] usb usb7: bus auto-suspend
[ 75.808448] usb usb7: suspend_rh
[ 75.808466] hub 8-0:1.0: hub_suspend
[ 75.808471] usb usb8: bus auto-suspend
[ 75.808473] usb usb8: suspend_rh
>
> Alan Stern
--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
next prev parent reply other threads:[~2011-06-29 20:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-29 19:21 3.0rc3-rc5: usb stops working after resume from suspend to ram Arkadiusz Miskiewicz
2011-06-29 19:59 ` Alan Stern
2011-06-29 20:59 ` Arkadiusz Miskiewicz [this message]
2011-06-29 21:26 ` Alan Stern
2011-06-30 15:19 ` Alan Stern
2011-06-30 15:25 ` Arkadiusz Miskiewicz
2011-06-30 16:19 ` Alan Stern
2011-06-30 18:25 ` 3.0rc3-rc5: usb stops working after resume from suspend Arkadiusz Miskiewicz
2011-06-30 19:06 ` Alan Stern
2011-07-04 8:54 ` 3.0rc3-rc5: usb stops working after resume from suspend to ram Arkadiusz Miskiewicz
2011-07-04 15:56 ` Alan Stern
2011-07-05 7:10 ` Arkadiusz Miskiewicz
2011-07-05 13:57 ` Alan Stern
2011-07-03 13:29 ` Maciej Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201106292259.32063.a.miskiewicz@gmail.com \
--to=a.miskiewicz@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.