[PATCH] mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message

["Kashyap, Desai" <kashyap.desai@lsi.com>]

Issue:
This issue is seen on LSI H/W WarpDrive SSS6200
When filed direct I/O is tried as volume I/O the scmd field in internal lookup 
table get cleared and because of that the retried volume I/O never gets 
reported as completed to SML.

Result:  
     I/O timeout and Error handling thread will kicking off 

Fix: Setting back the scmd in the lookup table before retrying the failed 
     direct i/o

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
---
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 939f283..6abd2fc 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -4258,6 +4258,7 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	u32 log_info;
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
 	u32 response_code = 0;
+	unsigned long flags;
 
 	mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
 	scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
@@ -4282,6 +4283,9 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	 * the failed direct I/O should be redirected to volume
 	 */
 	if (_scsih_scsi_direct_io_get(ioc, smid)) {
+		spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+		ioc->scsi_lookup[smid - 1].scmd = scmd;
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 		_scsih_scsi_direct_io_set(ioc, smid, 0);
 		memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
 		mpi_request->DevHandle =