From: Francesco Allertsen <fallertsen@gmail.com>
To: Keith Packard <keithp@keithp.com>
Cc: dri-devel@lists.freedesktop.org
Subject: Re: Reverting rc6 by default
Date: Wed, 6 Jul 2011 01:01:01 +0200 [thread overview]
Message-ID: <20110705230101.GD2852@fujiko> (raw)
In-Reply-To: <yunzklb9fg1.fsf@aiko.keithp.com>
[-- Attachment #1: Type: text/plain, Size: 728 bytes --]
On Tue, Jun 21, 2011 at 12:01:34PM -0700, Keith Packard wrote:
> Thanks. I'll see if I can't get an X201s upgraded to this version and
> see if we can reproduce the problem you're having...
Any news?
I have found the time today for more debugging.
Attached there are 3 files.
dmesg-startup is the startup of the last 3.0.0-rc6 kernel, with the
debug enabled.
dmesg-enabled is the X startup (and freeze) with debug mode and rc6
enabled.
dmesg-disabled is the X startup with debug mode enabled and rc6 disabled
(so no freeze; full kde startup and logout).
I hope this helps you to solve the problem, otherwise the X201s users
will not use the 3.0.0 kernel :-(.
If you need more informations just let me know.
Bye
Francesco
[-- Attachment #2: dmesg-startup --]
[-- Type: text/plain, Size: 68545 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-rc6 (lupin@fujiko) (gcc version 4.5.3 (GCC) ) #336 SMP Tue Jul 5 17:27:09 CEST 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bb27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb27c000 - 00000000bb282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb282000 - 00000000bb35f000 (usable)
[ 0.000000] BIOS-e820: 00000000bb35f000 - 00000000bb371000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb371000 - 00000000bb3f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb3f2000 - 00000000bb40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb40f000 - 00000000bb46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bb46f000 - 00000000bb668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb668000 - 00000000bb6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb6e8000 - 00000000bb70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb70f000 - 00000000bb717000 (usable)
[ 0.000000] BIOS-e820: 00000000bb717000 - 00000000bb71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bb71f000 - 00000000bb76c000 (usable)
[ 0.000000] BIOS-e820: 00000000bb76c000 - 00000000bb778000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb778000 - 00000000bb77b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb77b000 - 00000000bb78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb78b000 - 00000000bb78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb78c000 - 00000000bb79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bb79f000 - 00000000bb7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bb7ff000 - 00000000bb800000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 5129CTO/5129CTO, BIOS 6QET52WW (1.22 ) 08/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xbb800 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f6910] f6910
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000f68e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bb7f0970 00094 (v01 LENOVO TP-6Q 00001220 LTP 00000000)
[ 0.000000] ACPI: FACP bb7f0b00 000F4 (v04 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: DSDT bb7f0e6b 0DD26 (v01 LENOVO TP-6Q 00001220 MSFT 03000001)
[ 0.000000] ACPI: FACS bb6e7000 00040
[ 0.000000] ACPI: SSDT bb7f0cb4 001B7 (v01 LENOVO TP-6Q 00001220 MSFT 03000001)
[ 0.000000] ACPI: ECDT bb7feb91 00052 (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: APIC bb7febe3 00084 (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: MCFG bb7fec9f 0003C (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: HPET bb7fecdb 00038 (v01 LENOVO TP-6Q 00001220 LNVO 00000001)
[ 0.000000] ACPI: ASF! bb7fedbe 000A4 (v16 LENOVO TP-6Q 00001220 PTL 00000001)
[ 0.000000] ACPI: SLIC bb7fee62 00176 (v01 LENOVO TP-6Q 00001220 LTP 00000000)
[ 0.000000] ACPI: BOOT bb7fefd8 00028 (v01 LENOVO TP-6Q 00001220 LTP 00000001)
[ 0.000000] ACPI: SSDT bb6e590a 0085B (v01 LENOVO TP-6Q 00001220 INTL 20050513)
[ 0.000000] ACPI: TCPA bb78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT bb77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT bb779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050513)
[ 0.000000] ACPI: SSDT bb778000 0049F (v01 PmRef ApTst 00003000 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2112MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bb800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bb27c
[ 0.000000] 0: 0x000bb282 -> 0x000bb35f
[ 0.000000] 0: 0x000bb40f -> 0x000bb46f
[ 0.000000] 0: 0x000bb70f -> 0x000bb717
[ 0.000000] 0: 0x000bb71f -> 0x000bb76c
[ 0.000000] 0: 0x000bb7ff -> 0x000bb800
[ 0.000000] On node 0 totalpages: 766877
[ 0.000000] free_area_init_node: node 0, pgdat c16e8280, node_mem_map f608d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4225 pages used for memmap
[ 0.000000] HighMem zone: 535440 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f5c00000 s24640 r0 d24512 u1048576
[ 0.000000] pcpu-alloc: s24640 r0 d24512 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 760876
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux-git ro root=802 netconsole=6665@10.0.0.1/eth0,6666@10.0.0.2/00:26:9e:98:bb:00 drm.debug=0x04
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bb800)
[ 0.000000] Memory: 3034200k/3072000k available (5038k kernel code, 33308k reserved, 2087k data, 392k init, 2158660k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc16f6000 - 0xc1758000 ( 392 kB)
[ 0.000000] .data : 0xc14eb906 - 0xc16f5600 (2087 kB)
[ 0.000000] .text : 0xc1000000 - 0xc14eb906 (5038 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5808000 soft=f580a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 1995.250 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.50 BogoMIPS (lpj=1995250)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000045] Mount-cache hash table entries: 512
[ 0.000150] Initializing cgroup subsys freezer
[ 0.000175] CPU: Physical Processor ID: 0
[ 0.000178] CPU: Processor Core ID: 0
[ 0.000183] mce: CPU supports 9 MCE banks
[ 0.000195] CPU0: Thermal monitoring enabled (TM1)
[ 0.000203] using mwait in idle threads.
[ 0.000283] ACPI: Core revision 20110413
[ 0.018231] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.018641] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028641] CPU0: Intel(R) Core(TM) i7 CPU L 620 @ 2.00GHz stepping 02
[ 0.130365] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.130375] ... version: 3
[ 0.130378] ... bit width: 48
[ 0.130380] ... generic registers: 4
[ 0.130383] ... value mask: 0000ffffffffffff
[ 0.130386] ... max period: 000000007fffffff
[ 0.130389] ... fixed-purpose events: 3
[ 0.130392] ... event mask: 000000070000000f
[ 0.130549] CPU 1 irqstacks, hard=f588a000 soft=f588c000
[ 0.130551] Booting Node 0, Processors #1
[ 0.130554] smpboot cpu 1: start_ip = 9a000
[ 0.141134] Initializing CPU#1
[ 0.221474] CPU 2 irqstacks, hard=f5896000 soft=f5898000
[ 0.221481] #2
[ 0.221482] smpboot cpu 2: start_ip = 9a000
[ 0.231764] Initializing CPU#2
[ 0.312483] CPU 3 irqstacks, hard=f58a2000 soft=f58a4000
[ 0.312489] #3 Ok.
[ 0.312492] smpboot cpu 3: start_ip = 9a000
[ 0.322772] Initializing CPU#3
[ 0.403317] Brought up 4 CPUs
[ 0.403324] Total of 4 processors activated (15959.85 BogoMIPS).
[ 0.405112] kworker/u:0 used greatest stack depth: 7064 bytes left
[ 0.405243] PM: Registering ACPI NVS region at bb371000 (528384 bytes)
[ 0.405261] PM: Registering ACPI NVS region at bb668000 (524288 bytes)
[ 0.405275] PM: Registering ACPI NVS region at bb76c000 (49152 bytes)
[ 0.405279] PM: Registering ACPI NVS region at bb77b000 (65536 bytes)
[ 0.405285] PM: Registering ACPI NVS region at bb78c000 (77824 bytes)
[ 0.405376] Time: 17:32:37 Date: 07/05/11
[ 0.405414] NET: Registered protocol family 16
[ 0.405699] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.405705] ACPI: bus type pci registered
[ 0.405783] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.405790] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.405793] PCI: Using MMCONFIG for extended config space
[ 0.405797] PCI: Using configuration type 1 for base access
[ 0.412900] bio: create slab <bio-0> at 0
[ 0.414330] ACPI: EC: EC description table is found, configuring boot EC
[ 0.418837] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.497006] ACPI: SSDT bb71ac18 003A9 (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.497352] ACPI: Dynamic OEM Table Load:
[ 0.497357] ACPI: SSDT (null) 003A9 (v01 PmRef Cpu0Ist 00003000 INTL 20050513)
[ 0.497488] ACPI: SSDT bb718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.497846] ACPI: Dynamic OEM Table Load:
[ 0.497850] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20050513)
[ 0.503476] ACPI: SSDT bb719a98 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.503868] ACPI: Dynamic OEM Table Load:
[ 0.503872] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20050513)
[ 0.506333] ACPI: SSDT bb717d98 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.506687] ACPI: Dynamic OEM Table Load:
[ 0.506691] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20050513)
[ 0.510803] ACPI: Interpreter enabled
[ 0.510808] ACPI: (supports S0 S3 S4 S5)
[ 0.510829] ACPI: Using IOAPIC for interrupt routing
[ 0.515224] ACPI: Power Resource [PUBS] (on)
[ 0.519054] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.520144] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.520151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.520167] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.520230] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.520252] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.520271] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.520291] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.520307] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.520323] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.520348] pci_bus 0000:ff: on NUMA node 0
[ 0.520356] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.520361] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.520365] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.520758] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.520825] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.520830] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.520834] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.520839] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.520844] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.520849] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.520861] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.520891] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.520901] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit]
[ 0.520908] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.520912] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.520971] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.520998] pci 0000:00:16.0: reg 10: [mem 0xf2727800-0xf272780f 64bit]
[ 0.521073] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.521079] pci 0000:00:16.0: PME# disabled
[ 0.521105] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[ 0.521127] pci 0000:00:16.3: reg 10: [io 0x1808-0x180f]
[ 0.521138] pci 0000:00:16.3: reg 14: [mem 0xf2524000-0xf2524fff]
[ 0.521253] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.521283] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.521297] pci 0000:00:19.0: reg 14: [mem 0xf2525000-0xf2525fff]
[ 0.521308] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.521376] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.521381] pci 0000:00:19.0: PME# disabled
[ 0.521411] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.521436] pci 0000:00:1a.0: reg 10: [mem 0xf2728000-0xf27283ff]
[ 0.521525] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.521530] pci 0000:00:1a.0: PME# disabled
[ 0.521559] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.521580] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.521658] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.521663] pci 0000:00:1b.0: PME# disabled
[ 0.521687] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.521765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.521770] pci 0000:00:1c.0: PME# disabled
[ 0.521797] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.521875] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.521880] pci 0000:00:1c.3: PME# disabled
[ 0.521905] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.521983] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.521988] pci 0000:00:1c.4: PME# disabled
[ 0.522023] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.522047] pci 0000:00:1d.0: reg 10: [mem 0xf2728400-0xf27287ff]
[ 0.522135] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.522140] pci 0000:00:1d.0: PME# disabled
[ 0.522164] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.522239] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.522362] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.522388] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867]
[ 0.522399] pci 0000:00:1f.2: reg 14: [io 0x1814-0x1817]
[ 0.522410] pci 0000:00:1f.2: reg 18: [io 0x1818-0x181f]
[ 0.522421] pci 0000:00:1f.2: reg 1c: [io 0x1810-0x1813]
[ 0.522433] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.522444] pci 0000:00:1f.2: reg 24: [mem 0xf2727000-0xf27277ff]
[ 0.522492] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.522496] pci 0000:00:1f.2: PME# disabled
[ 0.522518] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.522539] pci 0000:00:1f.3: reg 10: [mem 0xf2728800-0xf27288ff 64bit]
[ 0.522569] pci 0000:00:1f.3: reg 20: [io 0x1880-0x189f]
[ 0.522615] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.522643] pci 0000:00:1f.6: reg 10: [mem 0xf2526000-0xf2526fff 64bit]
[ 0.522777] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.522784] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.522790] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.522797] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.522853] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.522860] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.522865] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.522872] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.522985] pci 0000:02:00.0: [8086:4230] type 0 class 0x000280
[ 0.523038] pci 0000:02:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.523212] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.523226] pci 0000:02:00.0: PME# disabled
[ 0.523319] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.523325] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.523330] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.523338] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.523412] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.523419] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.523424] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.523431] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.523434] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.523436] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.523438] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.523441] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.523443] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.523445] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.523470] pci_bus 0000:00: on NUMA node 0
[ 0.523472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.523583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.523613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.523641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.523769] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.523937] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.523942] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.526836] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.526898] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.526948] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.527009] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.527069] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.527118] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.527168] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.527229] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.527384] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.527394] vgaarb: loaded
[ 0.527396] vgaarb: bridge control possible 0000:00:02.0
[ 0.527541] SCSI subsystem initialized
[ 0.527635] libata version 3.00 loaded.
[ 0.527795] usbcore: registered new interface driver usbfs
[ 0.527831] usbcore: registered new interface driver hub
[ 0.527873] usbcore: registered new device driver usb
[ 0.528055] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.528060] PCI: Using ACPI for IRQ routing
[ 0.537954] PCI: pci_cache_line_size set to 64 bytes
[ 0.538033] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.538035] reserve RAM buffer: 00000000bb27c000 - 00000000bbffffff
[ 0.538040] reserve RAM buffer: 00000000bb35f000 - 00000000bbffffff
[ 0.538045] reserve RAM buffer: 00000000bb46f000 - 00000000bbffffff
[ 0.538049] reserve RAM buffer: 00000000bb717000 - 00000000bbffffff
[ 0.538052] reserve RAM buffer: 00000000bb76c000 - 00000000bbffffff
[ 0.538055] reserve RAM buffer: 00000000bb800000 - 00000000bbffffff
[ 0.538316] cfg80211: Calling CRDA to update world regulatory domain
[ 0.538518] NetLabel: Initializing
[ 0.538523] NetLabel: domain hash size = 128
[ 0.538525] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.538537] NetLabel: unlabeled traffic allowed by default
[ 0.538611] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.538620] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.540645] Switching to clocksource hpet
[ 0.541126] Switched to NOHz mode on CPU #0
[ 0.541204] Switched to NOHz mode on CPU #1
[ 0.541233] Switched to NOHz mode on CPU #3
[ 0.541271] Switched to NOHz mode on CPU #2
[ 0.543645] pnp: PnP ACPI init
[ 0.543657] ACPI: bus type pnp registered
[ 0.544851] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.544854] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.544856] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.544857] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.544859] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.544861] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.544863] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.544865] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.544867] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.544868] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.544870] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.544872] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.544874] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.544875] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.544877] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.544879] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.544881] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.544966] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.544972] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.544977] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.544981] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.544985] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.544989] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.544994] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.544998] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.545003] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.545007] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.545011] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.545016] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.545020] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.545024] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.545029] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.545034] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.545047] pnp 00:01: [bus ff]
[ 0.545117] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.545134] pnp 00:02: [bus 00-fe]
[ 0.545137] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.545139] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.545141] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.545143] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.545145] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.545146] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.545148] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.545150] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.545152] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.545154] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.545156] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.545158] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.545160] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.545161] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.545163] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.545165] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.545167] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.545169] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.545235] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.545501] pnp 00:03: [io 0x0010-0x001f]
[ 0.545503] pnp 00:03: [io 0x0090-0x009f]
[ 0.545505] pnp 00:03: [io 0x0024-0x0025]
[ 0.545506] pnp 00:03: [io 0x0028-0x0029]
[ 0.545508] pnp 00:03: [io 0x002c-0x002d]
[ 0.545510] pnp 00:03: [io 0x0030-0x0031]
[ 0.545511] pnp 00:03: [io 0x0034-0x0035]
[ 0.545513] pnp 00:03: [io 0x0038-0x0039]
[ 0.545514] pnp 00:03: [io 0x003c-0x003d]
[ 0.545516] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.545518] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.545519] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.545521] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.545522] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.545524] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.545527] pnp 00:03: [io 0x0050-0x0053]
[ 0.545529] pnp 00:03: [io 0x0072-0x0077]
[ 0.545530] pnp 00:03: [io 0x164e-0x164f]
[ 0.545532] pnp 00:03: [io 0x002e-0x002f]
[ 0.545533] pnp 00:03: [io 0x1000-0x107f]
[ 0.545535] pnp 00:03: [io 0x1180-0x11ff]
[ 0.545537] pnp 00:03: [io 0x0800-0x080f]
[ 0.545538] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.545540] pnp 00:03: [io 0x1600-0x1641]
[ 0.545541] pnp 00:03: [io 0x1644-0x167f]
[ 0.545543] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.545545] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[ 0.545546] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.545548] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.545550] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.545551] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.545553] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.545649] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.545655] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.545659] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.545663] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.545667] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.545671] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.545675] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.545680] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.545684] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.545689] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.545711] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.545715] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.545720] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.545724] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.545729] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.545757] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.545816] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.545826] pnp 00:05: [io 0x0000-0x000f]
[ 0.545827] pnp 00:05: [io 0x0080-0x008f]
[ 0.545829] pnp 00:05: [io 0x00c0-0x00df]
[ 0.545831] pnp 00:05: [dma 4]
[ 0.545885] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.545893] pnp 00:06: [io 0x0061]
[ 0.545948] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.545957] pnp 00:07: [io 0x00f0]
[ 0.545965] pnp 00:07: [irq 13]
[ 0.546020] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.546029] pnp 00:08: [io 0x0070-0x0071]
[ 0.546034] pnp 00:08: [irq 8]
[ 0.546090] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.546099] pnp 00:09: [io 0x0060]
[ 0.546100] pnp 00:09: [io 0x0064]
[ 0.546106] pnp 00:09: [irq 1]
[ 0.546161] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.546173] pnp 00:0a: [irq 12]
[ 0.546229] pnp 00:0a: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.546487] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.546549] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.546987] pnp: PnP ACPI: found 12 devices
[ 0.546992] ACPI: ACPI bus type pnp unregistered
[ 0.585242] PCI: max bus depth: 1 pci_try_num: 2
[ 0.585284] pci 0000:00:1c.0: PCI bridge to [bus 0d-0d]
[ 0.585289] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.585297] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.585303] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.585313] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.585318] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.585326] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.585333] pci 0000:00:1c.3: bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.585344] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.585347] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.585355] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.585362] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.585371] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.585374] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.585382] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.585388] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.585412] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.585421] pci 0000:00:1c.0: setting latency timer to 64
[ 0.585432] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.585439] pci 0000:00:1c.3: setting latency timer to 64
[ 0.585446] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.585453] pci 0000:00:1c.4: setting latency timer to 64
[ 0.585461] pci 0000:00:1e.0: setting latency timer to 64
[ 0.585465] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.585467] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.585469] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.585471] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.585473] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.585475] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.585477] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.585479] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.585481] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[ 0.585483] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.585485] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.585487] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.585489] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.585491] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.585493] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.585495] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.585525] NET: Registered protocol family 2
[ 0.585571] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.585727] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.586316] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.586610] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.586614] TCP reno registered
[ 0.586618] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.586629] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.586718] NET: Registered protocol family 1
[ 0.586820] RPC: Registered named UNIX socket transport module.
[ 0.586824] RPC: Registered udp transport module.
[ 0.586827] RPC: Registered tcp transport module.
[ 0.586829] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.586846] pci 0000:00:02.0: Boot video device
[ 0.586918] PCI: CLS 64 bytes, default 64
[ 0.586959] Simple Boot Flag at 0x35 set to 0x1
[ 0.588491] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 0.588500] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 0.588511] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 0.588521] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 0.588568] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.588868] audit: initializing netlink socket (disabled)
[ 0.588878] type=2000 audit(1309887157.348:1): initialized
[ 0.615295] highmem bounce pool size: 64 pages
[ 0.615304] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.625742] VFS: Disk quotas dquot_6.5.2
[ 0.625866] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.627327] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.627942] msgmni has been set to 1710
[ 0.628326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.628332] io scheduler noop registered (default)
[ 0.628938] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.629079] vesafb: mode is 1024x768x8, linelength=1024, pages=41
[ 0.629083] vesafb: scrolling: redraw
[ 0.629087] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 0.629440] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 1536k, total 32704k
[ 0.629500] fbcon: VESA VGA (fb0) is primary device
[ 0.662302] Console: switching to colour frame buffer device 128x48
[ 0.695440] fb0: VESA VGA frame buffer device
[ 0.695938] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.696699] ACPI: AC Adapter [AC] (on-line)
[ 0.697135] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.697788] ACPI: Lid Switch [LID]
[ 0.698061] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.698558] ACPI: Sleep Button [SLPB]
[ 0.698870] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.699322] ACPI: Power Button [PWRF]
[ 0.699652] ACPI: acpi_idle registered with cpuidle
[ 0.701510] Monitor-Mwait will be used to enter C-1 state
[ 0.701538] Monitor-Mwait will be used to enter C-2 state
[ 0.701566] Monitor-Mwait will be used to enter C-3 state
[ 0.707065] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.707411] ACPI: Thermal Zone [THM0] (54 C)
[ 0.707858] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.723952] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.724617] ACPI: Battery Slot [BAT0] (battery present)
[ 0.732842] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.753816] 0000:00:16.3: ttyS0 at I/O 0x1808 (irq = 17) is a 16550A
[ 0.770849] Non-volatile memory driver v1.3
[ 0.771160] Linux agpgart interface v0.103
[ 0.771464] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 0.771969] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.773662] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 0.774251] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.774784] [drm] Initialized drm 1.1.0 20060810
[ 0.790048] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.805551] i915 0000:00:02.0: power state changed by ACPI to D0
[ 0.821142] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.836783] i915 0000:00:02.0: setting latency timer to 64
[ 0.864922] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.864927] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.866670] [drm] Driver supports precise vblank timestamp query.
[ 0.868407] [drm:intel_detect_pch], Found Ibex Peak PCH
[ 0.868410] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 0.868415] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 0.868417] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x8 0xa
[ 0.868426] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 0.868428] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 0.868433] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 0.868443] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 0.868456] [drm:intel_modeset_init], 2 display pipes available.
[ 0.868464] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.932415] [drm:intel_crt_init], pch crt adpa set to 0xf40018
[ 0.932609] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
[ 0.933121] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 0.933124] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 0.933636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 0.933638] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[ 0.933704] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[ 0.933709] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 0.985460] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.013855] [drm:intel_update_fbc],
[ 1.013857] [drm:intel_update_fbc], no output, disabling
[ 1.013860] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[ 1.013862] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 1.014506] [drm:intel_update_fbc],
[ 1.014508] [drm:intel_update_fbc], no output, disabling
[ 1.110332] [drm:i915_setup_compression], FBC base 0xbe000000, ll base 0x00000000, size 28M
[ 1.110418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.110427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.110429] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.110434] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 1.110437] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40018
[ 1.120389] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 1.120394] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.120398] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 1.120404] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 1.131880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 1.131883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 1.132395] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 1.132397] [drm:ironlake_dp_detect], DPCD: 0000
[ 1.132399] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 1.132402] [drm:drm_setup_crtcs],
[ 1.132403] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.132406] [drm:drm_enable_connectors], connector 12 enabled? no
[ 1.132408] [drm:drm_enable_connectors], connector 15 enabled? no
[ 1.132410] [drm:drm_enable_connectors], connector 18 enabled? no
[ 1.132412] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.132414] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.132416] [drm:drm_target_preferred], found mode 1440x900
[ 1.132418] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 1.132421] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3
[ 1.148595] [drm:intelfb_create], allocated 1440x900 fb: 0x00045000, bo f594f200
[ 1.148601] checking generic (d0000000 1ff0000) vs hw (d0000000 10000000)
[ 1.148603] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.150412] Console: switching to colour dummy device 80x25
[ 1.150817] fbcon: inteldrmfb (fb0) is primary device
[ 1.150881] [drm:drm_crtc_helper_set_config],
[ 1.150883] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 1.150888] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 1.150890] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 1.150892] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.150895] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.150899] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 1.150900] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 1.150903] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.150905] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 1.150906] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.150913] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[ 1.150926] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz
[ 1.151157] [drm:ironlake_crtc_mode_set], Mode for pipe A:
[ 1.151159] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 1.203340] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.203345] [drm:intel_pipe_set_base_atomic], Writing base 00045000 00000000 0 0 5760
[ 1.203351] [drm:intel_update_fbc],
[ 1.203354] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 1.203358] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[ 1.203364] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[ 1.203369] [drm:ironlake_check_srwm], watermark 2: display plane 81, fbc lines 3, cursor 6
[ 1.203375] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1440x900]
[ 1.203380] [drm:ironlake_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6
[ 1.203385] [drm:ironlake_check_srwm], watermark 1: display plane 26, fbc lines 3, cursor 6
[ 1.203391] [drm:ironlake_check_srwm], watermark 2: display plane 81, fbc lines 3, cursor 6
[ 1.255310] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.307282] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.307592] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x700
[ 1.307594] [drm:ironlake_fdi_link_train], FDI train 1 done.
[ 1.307749] [drm:ironlake_fdi_link_train], FDI_RX_IIR 0x600
[ 1.307751] [drm:ironlake_fdi_link_train], FDI train 2 done.
[ 1.307752] [drm:ironlake_fdi_link_train], FDI train done
[ 1.309021] [drm:intel_update_fbc],
[ 1.309022] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 1.309031] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.309033] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.309044] [drm:drm_crtc_helper_set_config],
[ 1.309046] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 1.309048] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.309067] [drm:drm_crtc_helper_set_config],
[ 1.309069] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 1.309072] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.313966] Console: switching to colour frame buffer device 180x56
[ 1.313971] [drm:drm_crtc_helper_set_config],
[ 1.313972] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 1.313976] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 1.318916] fb0: inteldrmfb frame buffer device
[ 1.318947] drm: registered panic notifier
[ 1.329641] acpi device:02: registered as cooling_device4
[ 1.329808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 1.329870] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.329984] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.331081] loop: module loaded
[ 1.331407] ahci 0000:00:1f.2: version 3.0
[ 1.331419] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.331508] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.331544] ahci: SSS flag set, parallel bus scan disabled
[ 1.331629] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.331682] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.331744] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.338246] scsi0 : ahci
[ 1.338421] scsi1 : ahci
[ 1.338561] scsi2 : ahci
[ 1.338697] scsi3 : ahci
[ 1.338836] scsi4 : ahci
[ 1.338975] scsi5 : ahci
[ 1.339401] ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 41
[ 1.339452] ata2: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727180 irq 41
[ 1.339500] ata3: DUMMY
[ 1.339519] ata4: DUMMY
[ 1.339540] ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 41
[ 1.339589] ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 41
[ 1.340096] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.340144] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.340229] tun: Universal TUN/TAP device driver, 1.6
[ 1.340281] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.340378] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 1.340424] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 1.340489] iwl4965 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.340542] iwl4965 0000:02:00.0: setting latency timer to 64
[ 1.340562] iwl4965 0000:02:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 1.382738] iwl4965 0000:02:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 1.384730] iwl4965 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 1.386794] iwl4965 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.387111] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.389118] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[ 1.389134] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.391136] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.393105] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.395063] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.395067] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.397009] drivers/usb/core/inode.c: creating file 'devices'
[ 1.397012] drivers/usb/core/inode.c: creating file '001'
[ 1.397071] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.399014] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 1.399018] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.399032] ehci_hcd 0000:00:1a.0: support lpm
[ 1.399043] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.400981] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.404888] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.404890] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 1.404905] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2728000
[ 1.406844] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.410741] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.416245] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.418227] usb usb1: default language 0x0409
[ 1.418235] usb usb1: udev 1, busnum 1, minor = 0
[ 1.418237] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.420162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.422096] usb usb1: Product: EHCI Host Controller
[ 1.424008] usb usb1: Manufacturer: Linux 3.0.0-rc6 ehci_hcd
[ 1.425918] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.427921] usb usb1: usb_probe_device
[ 1.427924] usb usb1: configuration #1 chosen from 1 choice
[ 1.427931] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.427979] hub 1-0:1.0: usb_probe_interface
[ 1.427981] hub 1-0:1.0: usb_probe_interface - got id
[ 1.427983] hub 1-0:1.0: USB hub found
[ 1.429911] hub 1-0:1.0: 3 ports detected
[ 1.431821] hub 1-0:1.0: standalone hub
[ 1.431823] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.431824] hub 1-0:1.0: individual port over-current protection
[ 1.431826] hub 1-0:1.0: power on to power good time: 20ms
[ 1.431829] hub 1-0:1.0: local power source is good
[ 1.431831] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.431853] drivers/usb/core/inode.c: creating file '001'
[ 1.431892] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.433827] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.435735] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.437623] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.437627] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.439493] drivers/usb/core/inode.c: creating file '002'
[ 1.439551] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.441434] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3
[ 1.441438] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.441452] ehci_hcd 0000:00:1d.0: support lpm
[ 1.441464] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.443327] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.447216] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.447217] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 1.447232] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2728400
[ 1.449093] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.452977] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.458214] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.460126] usb usb2: default language 0x0409
[ 1.460131] usb usb2: udev 1, busnum 2, minor = 128
[ 1.460133] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.461994] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.463834] usb usb2: Product: EHCI Host Controller
[ 1.465633] usb usb2: Manufacturer: Linux 3.0.0-rc6 ehci_hcd
[ 1.467422] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.469271] usb usb2: usb_probe_device
[ 1.469273] usb usb2: configuration #1 chosen from 1 choice
[ 1.469279] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.469328] hub 2-0:1.0: usb_probe_interface
[ 1.469330] hub 2-0:1.0: usb_probe_interface - got id
[ 1.469331] hub 2-0:1.0: USB hub found
[ 1.471085] hub 2-0:1.0: 3 ports detected
[ 1.472822] hub 2-0:1.0: standalone hub
[ 1.472824] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.472825] hub 2-0:1.0: individual port over-current protection
[ 1.472827] hub 2-0:1.0: power on to power good time: 20ms
[ 1.472830] hub 2-0:1.0: local power source is good
[ 1.472832] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.472853] drivers/usb/core/inode.c: creating file '001'
[ 1.472918] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.474639] ohci_hcd: block sizes: ed 64 td 64
[ 1.474689] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.476518] usbcore: registered new interface driver usblp
[ 1.478208] Initializing USB Mass Storage driver...
[ 1.479965] usbcore: registered new interface driver usb-storage
[ 1.481710] USB Mass Storage support registered.
[ 1.483518] usbcore: registered new interface driver libusual
[ 1.485414] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.491577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.493402] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.495353] mousedev: PS/2 mouse device common for all mice
[ 1.497502] rtc_cmos 00:08: RTC can wake from S4
[ 1.499476] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.501325] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.503236] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.505206] Linux video capture interface: v2.00
[ 1.507134] usbcore: registered new interface driver uvcvideo
[ 1.508987] USB Video Class driver (v1.1.0)
[ 1.510899] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.512458] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.513239] cpuidle: using governor ladder
[ 1.518067] cpuidle: using governor menu
[ 1.519834] EFI Variables Facility v0.08 2004-May-17
[ 1.522796] usbcore: registered new interface driver usbhid
[ 1.524575] usbhid: USB HID core driver
[ 1.526749] ALSA device list:
[ 1.528649] No soundcards found.
[ 1.530496] Netfilter messages via NETLINK v0.30.
[ 1.531174] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.531178] hub 1-0:1.0: port 1: status 0501 change 0001
[ 1.532279] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.534872] ctnetlink v0.93: registering with nfnetlink.
[ 1.536823] xt_time: kernel timezone is -0000
[ 1.538839] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.540630] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 1.542406] arp_tables: (C) 2002 David S. Miller
[ 1.544160] TCP cubic registered
[ 1.545902] Initializing XFRM netlink socket
[ 1.548072] NET: Registered protocol family 10
[ 1.550231] IPv6 over IPv4 tunneling driver
[ 1.552633] NET: Registered protocol family 17
[ 1.554422] Registering the dns_resolver key type
[ 1.556193] Using IPI No-Shortcut mode
[ 1.558381] PM: Checking hibernation image partition /dev/sda1
[ 1.572171] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.572179] hub 2-0:1.0: port 1: status 0501 change 0001
[ 1.587206] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.590182] Switching to clocksource tsc
[ 1.631177] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 1.631190] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.644124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.646544] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.646555] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.648366] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.650393] ata1.00: ATA-7: INTEL SSDSA2M080G2GC, 2CV102HD, max UDMA/133
[ 1.652255] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.654464] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.654470] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.656319] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.658526] ata1.00: configured for UDMA/133
[ 1.660559] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[ 1.662779] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.662851] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.668126] sd 0:0:0:0: [sda] Write Protect is off
[ 1.671641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.671674] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.675596] sda: sda1 sda2 sda3
[ 1.679209] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.682370] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.682379] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.733211] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.786309] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 1.786313] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.849233] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 1.849241] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 1.849542] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.849547] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.852695] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.855700] usb 1-1: usb_probe_device
[ 1.855706] usb 1-1: configuration #1 chosen from 1 choice
[ 1.855797] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.855885] hub 1-1:1.0: usb_probe_interface
[ 1.855890] hub 1-1:1.0: usb_probe_interface - got id
[ 1.855894] hub 1-1:1.0: USB hub found
[ 1.859233] hub 1-1:1.0: 6 ports detected
[ 1.861201] hub 1-1:1.0: standalone hub
[ 1.861203] hub 1-1:1.0: individual port power switching
[ 1.861204] hub 1-1:1.0: individual port over-current protection
[ 1.861206] hub 1-1:1.0: Single TT
[ 1.861207] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.861209] hub 1-1:1.0: Port indicators are supported
[ 1.861211] hub 1-1:1.0: power on to power good time: 100ms
[ 1.861482] hub 1-1:1.0: local power source is good
[ 1.861488] hub 1-1:1.0: enabling power on all ports
[ 1.862278] drivers/usb/core/inode.c: creating file '002'
[ 1.862318] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 1.862330] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.913240] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 1.913245] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.963048] usb 1-1: link qh256-0001/f525bd00 start 1 [1/0 us]
[ 1.963924] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 1.967010] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.017183] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 2.017191] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.062881] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 2.080022] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 2.080030] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 2.080352] usb 2-1: udev 2, busnum 2, minor = 129
[ 2.080357] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.082302] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.084401] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
[ 2.086460] usb 2-1: usb_probe_device
[ 2.086463] usb 2-1: configuration #1 chosen from 1 choice
[ 2.086538] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 2.086591] hub 2-1:1.0: usb_probe_interface
[ 2.086593] hub 2-1:1.0: usb_probe_interface - got id
[ 2.086595] hub 2-1:1.0: USB hub found
[ 2.088661] hub 2-1:1.0: 8 ports detected
[ 2.090650] hub 2-1:1.0: standalone hub
[ 2.090652] hub 2-1:1.0: individual port power switching
[ 2.090654] hub 2-1:1.0: individual port over-current protection
[ 2.090656] hub 2-1:1.0: Single TT
[ 2.090658] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.090659] hub 2-1:1.0: Port indicators are supported
[ 2.090661] hub 2-1:1.0: power on to power good time: 100ms
[ 2.090905] hub 2-1:1.0: local power source is good
[ 2.090910] hub 2-1:1.0: enabling power on all ports
[ 2.091927] drivers/usb/core/inode.c: creating file '002'
[ 2.091953] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000
[ 2.192795] usb 2-1: link qh256-0001/f58cac00 start 1 [1/0 us]
[ 2.192837] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0000
[ 2.273835] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.581664] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.584881] PM: Hibernation image partition 8:1 present
[ 2.584885] PM: Looking for hibernation image.
[ 2.585085] PM: Image not found (code -22)
[ 2.585088] PM: Hibernation image not present or could not be loaded.
[ 2.585107] registered taskstats version 1
[ 2.592971] Magic number: 3:661:541
[ 2.602796] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 2.617838] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240)
[ 2.635021] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.638454] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 2.642100] Freeing unused kernel memory: 392k freed
[ 2.645682] Write protecting the kernel text: 5040k
[ 2.649200] Write protecting the kernel read-only data: 1760k
[ 2.720673] mount used greatest stack depth: 6512 bytes left
[ 2.728385] grep used greatest stack depth: 6372 bytes left
[ 2.759517] sed used greatest stack depth: 6336 bytes left
[ 2.857493] udevadm used greatest stack depth: 6148 bytes left
[ 2.878170] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.880422] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.882748] thinkpad_acpi: ThinkPad BIOS 6QET52WW (1.22 ), EC 6QHT24WW-1.05
[ 2.885301] thinkpad_acpi: Lenovo ThinkPad X201s, model 5129CTO
[ 2.889873] iwl4965 0000:02:00.0: loaded firmware version 228.61.2.24
[ 2.892466] Registered led device: phy0-led
[ 2.892548] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 2.898176] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.900978] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.903492] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 2.903531] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2.905070] thinkpad_acpi: radio switch found; radios are enabled
[ 2.909758] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.922618] Registered led device: tpacpi::thinklight
[ 2.922652] Registered led device: tpacpi::power
[ 2.922671] Registered led device: tpacpi::standby
[ 2.922703] Registered led device: tpacpi::thinkvantage
[ 2.926035] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.928747] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.932619] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 2.937896] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.040732] Adding 3903756k swap on /dev/sda1. Priority:-1 extents:1 across:3903756k SS
[ 3.981351] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 3.994276] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 4.001355] mount used greatest stack depth: 6060 bytes left
[ 4.090858] hub 1-1:1.0: hub_suspend
[ 4.090869] usb 1-1: unlink qh256-0001/f525bd00 start 1 [1/0 us]
[ 4.091129] usb 1-1: usb auto-suspend
[ 4.941412] hub 2-1:1.0: hub_suspend
[ 4.941421] usb 2-1: unlink qh256-0001/f58cac00 start 1 [1/0 us]
[ 4.941651] usb 2-1: usb auto-suspend
[ 6.100755] hub 1-0:1.0: hub_suspend
[ 6.100763] usb usb1: bus auto-suspend
[ 6.100767] ehci_hcd 0000:00:1a.0: suspend root hub
[ 6.951244] hub 2-0:1.0: hub_suspend
[ 6.951252] usb usb2: bus auto-suspend
[ 6.951255] ehci_hcd 0000:00:1d.0: suspend root hub
[ 7.092105] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 8.300108] update-mime-dat used greatest stack depth: 6036 bytes left
[ 11.337803] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 11.337811] [drm:intel_crt_detect], CRT not detected via hotplug
[ 11.337815] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2
[ 11.349377] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
[ 11.349896] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 11.349903] [drm:ironlake_dp_detect], DPCD: 0000
[ 11.349910] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2
[-- Attachment #3: dmesg-enabled --]
[-- Type: text/plain, Size: 6533 bytes --]
[ 311.047510] [drm:drm_crtc_helper_set_config],
[ 311.047515] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 311.047526] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.061055] [drm:drm_crtc_helper_set_config],
[ 311.061066] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 311.061079] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.061086] [drm:drm_crtc_helper_set_config],
[ 311.061092] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 311.061102] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.061575] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 311.061590] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 311.061687] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.061695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 311.061717] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 311.061725] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 311.061739] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.062116] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.062127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.062137] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.062145] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.062152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.062162] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.062168] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.062176] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.062183] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.062190] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.062253] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.062262] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.073858] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.073872] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.073879] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.085409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.085436] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.085441] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.085932] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.085936] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.085940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.085945] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.085948] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.086461] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.086464] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.086467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.086496] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.086501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 311.086508] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 311.086511] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 311.086521] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 311.087266] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.087272] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.087276] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.087279] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.087283] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.087287] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 311.087290] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 311.087294] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 311.087297] [drm:intel_crt_detect], CRT not detected via hotplug
[ 311.087300] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 311.087387] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.087396] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.098861] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.098867] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 311.098870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 311.110431] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 311.110452] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.110456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.110989] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.110993] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.110996] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.111001] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 311.111004] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 311.111520] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 311.111523] [drm:ironlake_dp_detect], DPCD: 0000
[ 311.111526] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 311.124869] [drm:drm_mode_addfb], [FB:20]
[ 311.124996] [drm:drm_mode_setcrtc], [CRTC:3]
[ 311.125005] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 311.125011] [drm:drm_crtc_helper_set_config],
[ 311.125016] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 311.125027] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 311.142936] [drm:intel_pipe_set_base_atomic], Writing base 00537000 00000000 0 0 6144
[ 311.142953] [drm:intel_update_fbc],
[ 311.142959] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 311.194780] [drm:intel_wait_for_vblank], vblank wait timed out
[ 311.733588] [drm:intel_crtc_cursor_set],
[ 312.063932] start_kdeinit (2086): /proc/2086/oom_adj is deprecated, please use /proc/2086/oom_score_adj instead.
[-- Attachment #4: dmesg-disabled --]
[-- Type: text/plain, Size: 11639 bytes --]
[ 141.056871] [drm:drm_crtc_helper_set_config],
[ 141.056876] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 141.056892] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.070918] [drm:drm_crtc_helper_set_config],
[ 141.070929] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 141.070941] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.070949] [drm:drm_crtc_helper_set_config],
[ 141.070955] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 141.070963] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.071526] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 141.071542] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[ 141.071642] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.071651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 141.071676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 141.071683] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 141.071697] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.072079] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.072095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.072108] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.072121] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.072141] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.072156] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.072167] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.072179] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.072194] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.072204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.072262] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.072270] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.083834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.083842] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.083845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.095438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.095467] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.095471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.095984] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.095987] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.095991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.095995] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.095998] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.096510] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.096515] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.096518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.096552] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.096556] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 141.096563] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 141.096567] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 141.096573] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 141.097337] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.097343] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.097347] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.097350] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.097354] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.097358] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 141.097361] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 141.097364] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 141.097368] [drm:intel_crt_detect], CRT not detected via hotplug
[ 141.097371] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 141.097451] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.097460] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.108960] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.108967] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 141.108971] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 141.120470] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 141.120494] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.120554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.121073] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.121083] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.121089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.121096] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 141.121101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 141.121615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 141.121619] [drm:ironlake_dp_detect], DPCD: 0000
[ 141.121623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 141.138087] [drm:drm_mode_addfb], [FB:20]
[ 141.138274] [drm:drm_mode_setcrtc], [CRTC:3]
[ 141.138285] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 141.138292] [drm:drm_crtc_helper_set_config],
[ 141.138298] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 141.138314] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 141.156197] [drm:intel_pipe_set_base_atomic], Writing base 00535000 00000000 0 0 6144
[ 141.156215] [drm:intel_update_fbc],
[ 141.156221] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 141.208028] [drm:intel_wait_for_vblank], vblank wait timed out
[ 141.777834] [drm:intel_crtc_cursor_set],
[ 142.108871] start_kdeinit (1983): /proc/1983/oom_adj is deprecated, please use /proc/1983/oom_score_adj instead.
[ 143.843382] ata1.00: configured for UDMA/133
[ 143.843394] ata1: EH complete
[ 144.150701] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 144.160165] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 151.096603] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 151.096617] [drm:intel_crt_detect], CRT not detected via hotplug
[ 151.096623] [drm:output_poll_execute], [CONNECTOR:12:VGA-1] status updated from 2 to 2
[ 151.108237] [drm:output_poll_execute], [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2
[ 151.108767] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 151.108775] [drm:ironlake_dp_detect], DPCD: 0000
[ 151.108782] [drm:output_poll_execute], [CONNECTOR:18:DP-1] status updated from 2 to 2
[ 154.288554] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 154.288570] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 154.288592] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 154.288599] [drm:drm_mode_debug_printmodeline], Modeline 21:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa
[ 154.288609] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 154.288914] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 154.288922] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 154.288929] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 154.288935] [drm:intel_crt_detect], CRT not detected via hotplug
[ 154.288940] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 154.288949] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[ 154.288955] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1]
[ 154.288960] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[ 154.288966] [drm:intel_crt_detect], CRT not detected via hotplug
[ 154.288970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] disconnected
[ 154.288980] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 154.288986] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 154.300706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 154.300740] [drm:drm_mode_getconnector], [CONNECTOR:15:?]
[ 154.300747] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1]
[ 154.312375] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected
[ 154.312422] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 154.312431] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 154.312949] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 154.312957] [drm:ironlake_dp_detect], DPCD: 0000
[ 154.312964] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 154.312974] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
[ 154.312980] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
[ 154.313499] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
[ 154.313508] [drm:ironlake_dp_detect], DPCD: 0000
[ 154.313514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
[ 157.364426] [drm:intel_crtc_cursor_set],
[ 157.364439] [drm:intel_crtc_cursor_set], cursor off
[ 157.425282] [drm:drm_crtc_helper_set_config],
[ 157.425287] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.425300] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.425320] [drm:intel_pipe_set_base_atomic], Writing base 00043000 00000000 0 0 5760
[ 157.425327] [drm:intel_update_fbc],
[ 157.425329] [drm:intel_update_fbc], fbc disabled per module param (default off)
[ 157.477037] [drm:intel_wait_for_vblank], vblank wait timed out
[ 157.477042] [drm:drm_crtc_helper_set_config],
[ 157.477045] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 157.477051] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.477055] [drm:drm_crtc_helper_set_config],
[ 157.477058] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.477064] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.477081] [drm:drm_crtc_helper_set_config],
[ 157.477083] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.477089] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.488380] [drm:drm_crtc_helper_set_config],
[ 157.488384] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.488392] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.553538] [drm:drm_crtc_helper_set_config],
[ 157.555318] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:9] #connectors=1 (x y) (0 0)
[ 157.557269] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[ 157.559124] [drm:drm_crtc_helper_set_config],
[ 157.560892] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[ 157.562709] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3]
[-- Attachment #5: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2011-07-05 23:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-21 14:21 Reverting rc6 by default Francesco Allertsen
2011-06-21 15:28 ` Keith Packard
2011-06-21 15:52 ` Francesco Allertsen
2011-06-21 16:11 ` Keith Packard
2011-06-21 16:42 ` Francesco Allertsen
2011-06-21 18:04 ` Keith Packard
2011-06-21 18:29 ` Jesse Barnes
2011-06-21 18:48 ` Francesco Allertsen
2011-06-21 19:12 ` Marcin Slusarz
2011-06-22 7:58 ` Francesco Allertsen
2011-06-21 18:47 ` Francesco Allertsen
2011-06-21 19:01 ` Keith Packard
2011-07-05 23:01 ` Francesco Allertsen [this message]
2011-07-12 7:14 ` Francesco Allertsen
2011-07-12 7:33 ` Pekka Enberg
2011-07-12 15:42 ` Keith Packard
2011-07-14 7:37 ` Pekka Enberg
2011-07-14 7:50 ` Francesco Allertsen
2011-07-14 7:50 ` Francesco Allertsen
2011-07-14 16:06 ` Keith Packard
2011-07-14 17:00 ` Francesco Allertsen
2011-07-14 17:36 ` Keith Packard
2011-08-12 19:53 ` Keith Packard
2011-08-13 12:45 ` Francesco Allertsen
2011-08-13 12:45 ` Francesco Allertsen
2011-07-14 16:02 ` Keith Packard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110705230101.GD2852@fujiko \
--to=fallertsen@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=keithp@keithp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.