From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Thu, 07 Jul 2011 21:46:22 +0000 Subject: [lm-sensors] [PATCH v2] sensors-detect: Add support for NXP/Philips Message-Id: <20110707214622.GA25251@ericsson.com> List-Id: References: <1283976237-6067-1-git-send-email-guenter.roeck@ericsson.com> In-Reply-To: <1283976237-6067-1-git-send-email-guenter.roeck@ericsson.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org v2: Stronger detection code. Confidence reduced from 8 to 6. -- Index: prog/detect/sensors-detect =================================--- prog/detect/sensors-detect (revision 5982) +++ prog/detect/sensors-detect (working copy) @@ -1055,6 +1055,11 @@ i2c_addrs => [0x4c..0x4d], i2c_detect => sub { lm90_detect(@_, 13); }, }, { + name => "NXP/Philips SA56004", + driver => "lm90", + i2c_addrs => [0x48..0x4f], + i2c_detect => sub { lm90_detect(@_, 14); }, + }, { name => "Analog Devices ADT7481", driver => "to-be-written", i2c_addrs => [0x4c, 0x4b], @@ -4352,11 +4357,11 @@ # 6 = MAX6646/MAX6647/MAX6648/MAX6649/MAX6692, # 8 = W83L771W/G, 9 = TMP401, 10 = TMP411, # 11 = W83L771AWG/ASG, 12 = MAX6690, -# 13 = ADT7461A/NCT1008 +# 13 = ADT7461A/NCT1008, 14 = SA56004 # Registers used: # 0x03: Configuration # 0x04: Conversion rate -# 0xbf: Configuration 2 (National Semiconductor and Winbond only) +# 0xbf: Configuration 2 (National Semiconductor, Winbond, and Philips only) # 0xfe: Manufacturer ID # 0xff: Chip ID / die revision sub lm90_detect @@ -4457,6 +4462,13 @@ return if $mid != 0x41; # Analog Devices return 8 if $cid = 0x57; # ADT7461A, NCT1008 } + if ($chip = 14) { + return if ($conf & 0x2a) != 0; + return if ($conf2 & 0xfe) != 0; + return if $rate > 0x09; + return if $mid != 0xa1; # NXP Semiconductor/Philips + return 6 if $cid = 0x00; # SA56004 + } return; } Index: CHANGES =================================--- CHANGES (revision 5982) +++ CHANGES (working copy) @@ -16,6 +16,7 @@ Add detection of MAX6642 Add detection of ITE IT8772E Don't advertise the ipmisensors driver + Add detection of SA56004 3.3.0 (2011-03-28) Makefile: Check for bison and flex _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors