From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: greg@kroah.com, linux-kernel@vger.kernel.org
Subject: [PATCH 06/12] gma500: tidy up the CDV files
Date: Fri, 08 Jul 2011 09:44:20 +0100 [thread overview]
Message-ID: <20110708084413.19581.64011.stgit@localhost.localdomain> (raw)
In-Reply-To: <20110708084053.19581.81711.stgit@localhost.localdomain>
From: Alan Cox <alan@linux.intel.com>
We are close to having PSB and CDV ready for moving from staging so it's
time to get the polish out.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/staging/gma500/cdv_device.c | 21 +++--
drivers/staging/gma500/cdv_intel_crt.c | 23 +++---
drivers/staging/gma500/cdv_intel_display.c | 115 +++++++++++++---------------
drivers/staging/gma500/cdv_intel_hdmi.c | 80 ++++++++++---------
drivers/staging/gma500/cdv_intel_lvds.c | 20 +++--
5 files changed, 133 insertions(+), 126 deletions(-)
diff --git a/drivers/staging/gma500/cdv_device.c b/drivers/staging/gma500/cdv_device.c
index 3729a97..87614e0 100644
--- a/drivers/staging/gma500/cdv_device.c
+++ b/drivers/staging/gma500/cdv_device.c
@@ -129,7 +129,6 @@ static int cdv_backlight_setup(struct drm_device *dev)
static int cdv_set_brightness(struct backlight_device *bd)
{
- struct drm_device *dev = bl_get_data(cdv_backlight_device);
int level = bd->props.brightness;
/* Percentage 1-100% being valid */
@@ -188,9 +187,9 @@ static inline u32 CDV_MSG_READ32(uint port, uint offset)
{
int mcr = (0x10<<24) | (port << 16) | (offset << 8);
uint32_t ret_val = 0;
- struct pci_dev *pci_root = pci_get_bus_and_slot (0, 0);
- pci_write_config_dword (pci_root, 0xD0, mcr);
- pci_read_config_dword (pci_root, 0xD4, &ret_val);
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ pci_write_config_dword(pci_root, 0xD0, mcr);
+ pci_read_config_dword(pci_root, 0xD4, &ret_val);
pci_dev_put(pci_root);
return ret_val;
}
@@ -198,9 +197,9 @@ static inline u32 CDV_MSG_READ32(uint port, uint offset)
static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
{
int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
- struct pci_dev *pci_root = pci_get_bus_and_slot (0, 0);
- pci_write_config_dword (pci_root, 0xD4, value);
- pci_write_config_dword (pci_root, 0xD0, mcr);
+ struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+ pci_write_config_dword(pci_root, 0xD4, value);
+ pci_write_config_dword(pci_root, 0xD0, mcr);
pci_dev_put(pci_root);
}
@@ -218,8 +217,10 @@ static void cdv_init_pm(struct drm_device *dev)
u32 pwr_cnt;
int i;
- dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, PSB_APMBA) & 0xFFFF;
- dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, PSB_OSPMBA) & 0xFFFF;
+ dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+ PSB_APMBA) & 0xFFFF;
+ dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+ PSB_OSPMBA) & 0xFFFF;
/* Force power on for now */
pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
@@ -346,5 +347,5 @@ const struct psb_ops cdv_chip_ops = {
.save_regs = cdv_save_display_registers,
.restore_regs = cdv_restore_display_registers,
.power_down = cdv_power_down,
- .power_up = cdv_power_up,
+ .power_up = cdv_power_up,
};
diff --git a/drivers/staging/gma500/cdv_intel_crt.c b/drivers/staging/gma500/cdv_intel_crt.c
index e26749c..efda63b 100644
--- a/drivers/staging/gma500/cdv_intel_crt.c
+++ b/drivers/staging/gma500/cdv_intel_crt.c
@@ -45,7 +45,7 @@ static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
temp &= ~ADPA_DAC_ENABLE;
- switch(mode) {
+ switch (mode) {
case DRM_MODE_DPMS_ON:
temp |= ADPA_DAC_ENABLE;
break;
@@ -128,11 +128,10 @@ static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
adpa |= ADPA_VSYNC_ACTIVE_HIGH;
- if (psb_intel_crtc->pipe == 0) {
+ if (psb_intel_crtc->pipe == 0)
adpa |= ADPA_PIPE_A_SELECT;
- } else {
+ else
adpa |= ADPA_PIPE_B_SELECT;
- }
REG_WRITE(adpa_reg, adpa);
}
@@ -144,7 +143,8 @@ static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
* \return true if CRT is connected.
* \return false if CRT is disconnected.
*/
-static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector, bool force)
+static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
+ bool force)
{
struct drm_device *dev = connector->dev;
u32 hotplug_en;
@@ -193,7 +193,8 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector, bool f
return ret;
}
-static enum drm_connector_status cdv_intel_crt_detect(struct drm_connector *connector, bool force)
+static enum drm_connector_status cdv_intel_crt_detect(
+ struct drm_connector *connector, bool force)
{
if (cdv_intel_crt_detect_hotplug(connector, force))
return connector_status_connected;
@@ -245,7 +246,8 @@ static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
.set_property = cdv_intel_crt_set_property,
};
-static const struct drm_connector_helper_funcs cdv_intel_crt_connector_helper_funcs = {
+static const struct drm_connector_helper_funcs
+ cdv_intel_crt_connector_helper_funcs = {
.mode_valid = cdv_intel_crt_mode_valid,
.get_modes = cdv_intel_crt_get_modes,
.best_encoder = psb_intel_best_encoder,
@@ -277,11 +279,11 @@ void cdv_intel_crt_init(struct drm_device *dev,
psb_intel_output->mode_dev = mode_dev;
connector = &psb_intel_output->base;
drm_connector_init(dev, connector,
- &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+ &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
encoder = &psb_intel_output->enc;
drm_encoder_init(dev, encoder,
- &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
+ &cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
drm_mode_connector_attach_encoder(&psb_intel_output->base,
&psb_intel_output->enc);
@@ -310,7 +312,8 @@ void cdv_intel_crt_init(struct drm_device *dev,
connector->doublescan_allowed = 0;
drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
- drm_connector_helper_add(connector, &cdv_intel_crt_connector_helper_funcs);
+ drm_connector_helper_add(connector,
+ &cdv_intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
diff --git a/drivers/staging/gma500/cdv_intel_display.c b/drivers/staging/gma500/cdv_intel_display.c
index 2042e98..7b97c60 100644
--- a/drivers/staging/gma500/cdv_intel_display.c
+++ b/drivers/staging/gma500/cdv_intel_display.c
@@ -11,7 +11,7 @@
* more details.
*
* You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
+ * this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
@@ -40,8 +40,7 @@ struct cdv_intel_p2_t {
int p2_slow, p2_fast;
};
-struct cdv_intel_clock_t
-{
+struct cdv_intel_clock_t {
/* given values */
int n;
int m1, m2;
@@ -117,17 +116,18 @@ static const struct cdv_intel_limit_t cdv_intel_limits[] = {
};
#define _wait_for(COND, MS, W) ({ \
- unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
- int ret__ = 0; \
- while (! (COND)) { \
- if (time_after(jiffies, timeout__)) { \
- ret__ = -ETIMEDOUT; \
- break; \
- } \
- if (W && !in_dbg_master()) msleep(W); \
- } \
- ret__; \
-})
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ if (W && !in_dbg_master()) \
+ msleep(W); \
+ } \
+ ret__; \
+})
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
@@ -237,7 +237,7 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
ref_value = 0x68A701;
cdv_sb_write(dev, SB_REF_SFR(pipe), ref_value);
-
+
/* We don't know what the other fields of these regs are, so
* leave them in place.
*/
@@ -324,14 +324,13 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
lane_value |= LANE_PLL_ENABLE;
cdv_sb_write(dev, lane_reg, lane_value);
- /* Program the Lane2/3 for HDMI C */
+ /* Program the Lane2/3 for HDMI C */
lane_reg = PSB_LANE2;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
lane_value |= LANE_PLL_ENABLE;
cdv_sb_write(dev, lane_reg, lane_value);
-
lane_reg = PSB_LANE3;
cdv_sb_read(dev, lane_reg, &lane_value);
lane_value &= ~(LANE_PLL_MASK);
@@ -362,17 +361,18 @@ bool cdv_intel_pipe_has_type(struct drm_crtc *crtc, int type)
return false;
}
-static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, int refclk)
+static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc,
+ int refclk)
{
const struct cdv_intel_limit_t *limit;
if (cdv_intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
/*
- * Now only single-channel LVDS is supported on CDV. If it is
- * incorrect, please add the dual-channel LVDS.
- */
+ * Now only single-channel LVDS is supported on CDV. If it is
+ * incorrect, please add the dual-channel LVDS.
+ */
if (refclk == 96000)
limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_96];
- else
+ else
limit = &cdv_intel_limits[CDV_LIMIT_SINGLE_LVDS_100];
} else {
if (refclk == 27000)
@@ -384,7 +384,7 @@ static const struct cdv_intel_limit_t *cdv_intel_limit(struct drm_crtc *crtc, in
}
/* m1 is reserved as 0 in CDV, n is a ring counter */
-static void cdv_intel_clock(struct drm_device *dev,
+static void cdv_intel_clock(struct drm_device *dev,
int refclk, struct cdv_intel_clock_t *clock)
{
clock->m = clock->m2 + 2;
@@ -448,19 +448,22 @@ static bool cdv_intel_find_best_PLL(struct drm_crtc *crtc, int target,
memset(best_clock, 0, sizeof(*best_clock));
clock.m1 = 0;
- /* m1 is reserved as 0 in CDV, n is a ring counter. So skip the m1 loop */
+ /* m1 is reserved as 0 in CDV, n is a ring counter.
+ So skip the m1 loop */
for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max;
clock.m2++) {
- for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
- clock.p1++) {
+ for (clock.p1 = limit->p1.min;
+ clock.p1 <= limit->p1.max;
+ clock.p1++) {
int this_err;
cdv_intel_clock(dev, refclk, &clock);
- if (!cdv_intel_PLL_is_valid(crtc, limit, &clock))
+ if (!cdv_intel_PLL_is_valid(crtc,
+ limit, &clock))
continue;
-
+
this_err = abs(clock.dot - target);
if (this_err < err) {
*best_clock = clock;
@@ -533,7 +536,7 @@ int cdv_intel_pipe_set_base(struct drm_crtc *crtc,
REG_WRITE(dspcntr_reg, dspcntr);
dev_dbg(dev->dev,
- "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+ "Writing base %08lX %08lX %d %d\n", start, offset, x, y);
REG_WRITE(dspbase, offset);
REG_READ(dspbase);
@@ -808,7 +811,7 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
dpll |= DPLLB_MODE_LVDS;
else
dpll |= DPLLB_MODE_DAC_SERIAL;
- //dpll |= (2 << 11);
+ /* dpll |= (2 << 11); */
/* setup pipeconf */
pipeconf = REG_READ(pipeconf_reg);
@@ -824,14 +827,12 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
dspcntr |= DISPLAY_PLANE_ENABLE;
pipeconf |= PIPEACONF_ENABLE;
- REG_WRITE(dpll_reg,
- dpll | DPLL_VGA_MODE_DIS |
- DPLL_SYNCLOCK_ENABLE);
- REG_READ(dpll_reg);
+ REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
+ REG_READ(dpll_reg);
cdv_dpll_set_clock_cdv(dev, crtc, &clock);
- udelay(150);
+ udelay(150);
/* The LVDS pin pair needs to be on before the DPLLs are enabled.
@@ -864,7 +865,6 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
dpll |= DPLL_VCO_ENABLE;
-
/* Disable the panel fitter if it was on our pipe */
if (cdv_intel_panel_fitter_pipe(dev) == pipe)
REG_WRITE(PFIT_CONTROL, 0);
@@ -873,24 +873,19 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
drm_mode_debug_printmodeline(mode);
REG_WRITE(dpll_reg,
- (REG_READ(dpll_reg) & ~DPLL_LOCK) |
- DPLL_VCO_ENABLE);
- REG_READ(dpll_reg);
+ (REG_READ(dpll_reg) & ~DPLL_LOCK) | DPLL_VCO_ENABLE);
+ REG_READ(dpll_reg);
/* Wait for the clocks to stabilize. */
- udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */
-
- if (!(REG_READ(dpll_reg) & DPLL_LOCK)) {
- dev_err(dev->dev, "Failed to get DPLL lock\n");
- return -EBUSY;
- }
-
- {
- int sdvo_pixel_multiply =
- adjusted_mode->clock / mode->clock;
- REG_WRITE(dpll_md_reg,
- (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
- ((sdvo_pixel_multiply -
- 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ udelay(150); /* 42 usec w/o calibration, 110 with. rounded up. */
+
+ if (!(REG_READ(dpll_reg) & DPLL_LOCK)) {
+ dev_err(dev->dev, "Failed to get DPLL lock\n");
+ return -EBUSY;
+ }
+
+ {
+ int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ REG_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) | ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
}
REG_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
@@ -956,10 +951,10 @@ void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
palreg = PALETTE_C;
break;
default:
- dev_err(dev->dev, "Illegal Pipe Number. \n");
+ dev_err(dev->dev, "Illegal Pipe Number.\n");
return;
}
-
+
if (gma_power_begin(dev, false)) {
for (i = 0; i < 256; i++) {
REG_WRITE(palreg + 4 * i,
@@ -1276,7 +1271,7 @@ static int cdv_intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
}
static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
- u16 *green, u16 *blue, uint32_t start, uint32_t size)
+ u16 *green, u16 *blue, uint32_t start, uint32_t size)
{
struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
int i;
@@ -1294,10 +1289,10 @@ static void cdv_intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red,
static int cdv_crtc_set_config(struct drm_mode_set *set)
{
int ret = 0;
- struct drm_device * dev = set->crtc->dev;
- struct drm_psb_private * dev_priv = dev->dev_private;
+ struct drm_device *dev = set->crtc->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
- if(!dev_priv->rpm_enabled)
+ if (!dev_priv->rpm_enabled)
return drm_crtc_helper_set_config(set);
pm_runtime_forbid(&dev->pdev->dev);
@@ -1489,7 +1484,7 @@ void cdv_intel_cursor_init(struct drm_device *dev, int pipe)
{
uint32_t control;
uint32_t base;
-
+
switch (pipe) {
case 0:
control = CURACNTR;
diff --git a/drivers/staging/gma500/cdv_intel_hdmi.c b/drivers/staging/gma500/cdv_intel_hdmi.c
index 5acfb37..7f86c0c 100644
--- a/drivers/staging/gma500/cdv_intel_hdmi.c
+++ b/drivers/staging/gma500/cdv_intel_hdmi.c
@@ -59,8 +59,8 @@ struct mid_intel_hdmi_priv {
};
static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
@@ -83,7 +83,7 @@ static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
hdmib |= HDMI_AUDIO_ENABLE;
hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC;
}
-
+
REG_WRITE(hdmi_priv->hdmi_reg, hdmib);
REG_READ(hdmi_priv->hdmi_reg);
}
@@ -92,8 +92,7 @@ static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
-
- return true;
+ return true;
}
static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
@@ -105,11 +104,10 @@ static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
hdmib = REG_READ(hdmi_priv->hdmi_reg);
- if (mode != DRM_MODE_DPMS_ON) {
+ if (mode != DRM_MODE_DPMS_ON)
REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN);
- } else {
+ else
REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN);
- }
REG_READ(hdmi_priv->hdmi_reg);
}
@@ -132,11 +130,12 @@ static void cdv_hdmi_restore(struct drm_connector *connector)
REG_READ(hdmi_priv->hdmi_reg);
}
-static enum drm_connector_status cdv_hdmi_detect(struct drm_connector *connector, bool force)
+static enum drm_connector_status cdv_hdmi_detect(
+ struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
- struct drm_psb_private *dev_priv = dev->dev_private;
- struct psb_intel_output *psb_intel_output = to_psb_intel_output(connector);
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv;
struct edid *edid = NULL;
enum drm_connector_status status = connector_status_disconnected;
@@ -149,8 +148,10 @@ static enum drm_connector_status cdv_hdmi_detect(struct drm_connector *connector
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
- hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
- hdmi_priv->has_hdmi_audio = drm_detect_monitor_audio(edid);
+ hdmi_priv->has_hdmi_sink =
+ drm_detect_hdmi_monitor(edid);
+ hdmi_priv->has_hdmi_audio =
+ drm_detect_monitor_audio(edid);
}
psb_intel_output->base.display_info.raw_edid = NULL;
@@ -171,7 +172,7 @@ static int cdv_hdmi_set_property(struct drm_connector *connector,
uint64_t curValue;
if (!crtc)
- return -1;
+ return -1;
switch (value) {
case DRM_MODE_SCALE_FULLSCREEN:
@@ -181,17 +182,19 @@ static int cdv_hdmi_set_property(struct drm_connector *connector,
case DRM_MODE_SCALE_ASPECT:
break;
default:
- return -1;
+ return -1;
}
- if (drm_connector_property_get_value(connector, property, &curValue))
- return -1;
+ if (drm_connector_property_get_value(connector,
+ property, &curValue))
+ return -1;
if (curValue == value)
- return 0;
+ return 0;
- if (drm_connector_property_set_value(connector, property, value))
- return -1;
+ if (drm_connector_property_set_value(connector,
+ property, value))
+ return -1;
centre = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
(value == DRM_MODE_SCALE_NO_SCALE);
@@ -203,9 +206,10 @@ static int cdv_hdmi_set_property(struct drm_connector *connector,
encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
return -1;
} else {
- struct drm_encoder_helper_funcs *helpers = encoder->helper_private;
+ struct drm_encoder_helper_funcs *helpers
+ = encoder->helper_private;
helpers->mode_set(encoder, &crtc->saved_mode,
- &crtc->saved_adjusted_mode);
+ &crtc->saved_adjusted_mode);
}
}
}
@@ -217,7 +221,8 @@ static int cdv_hdmi_set_property(struct drm_connector *connector,
*/
static int cdv_hdmi_get_modes(struct drm_connector *connector)
{
- struct psb_intel_output *psb_intel_output = to_psb_intel_output(connector);
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
struct edid *edid = NULL;
int ret = 0;
@@ -250,8 +255,8 @@ static int cdv_hdmi_mode_valid(struct drm_connector *connector,
return MODE_NO_INTERLACE;
/*
- * FIXME: fornow we limit the size to 1680x1050 on CDV, otherwise it will
- * go beyond the stolen memory size allocated to the Framebuffer
+ * FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it
+ * will go beyond the stolen memory size allocated to the framebuffer
*/
if (mode->hdisplay > 1680)
return MODE_PANEL;
@@ -280,7 +285,8 @@ static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = {
.commit = psb_intel_encoder_commit,
};
-static const struct drm_connector_helper_funcs cdv_hdmi_connector_helper_funcs = {
+static const struct drm_connector_helper_funcs
+ cdv_hdmi_connector_helper_funcs = {
.get_modes = cdv_hdmi_get_modes,
.mode_valid = cdv_hdmi_mode_valid,
.best_encoder = psb_intel_best_encoder,
@@ -296,7 +302,8 @@ static const struct drm_connector_funcs cdv_hdmi_connector_funcs = {
.destroy = cdv_hdmi_destroy,
};
-void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int reg)
+void cdv_hdmi_init(struct drm_device *dev,
+ struct psb_intel_mode_device *mode_dev, int reg)
{
struct psb_intel_output *psb_intel_output;
struct drm_connector *connector;
@@ -334,7 +341,8 @@ void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_de
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
- drm_connector_attach_property(connector, dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
+ drm_connector_attach_property(connector,
+ dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
switch (reg) {
case SDVOB:
@@ -350,19 +358,15 @@ void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_de
}
psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
- ddc_bus, (reg == SDVOB) ? "HDMIB":"HDMIC");
+ ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC");
- if (psb_intel_output->ddc_bus) {
- /* HACKS_JLIU7 */
- DRM_INFO("Enter cdv_hdmi_init, i2c_adapter is availabe.\n");
-
- } else {
- printk(KERN_ALERT "No ddc adapter available!\n");
+ if (!psb_intel_output->ddc_bus) {
+ dev_err(dev->dev, "No ddc adapter available!\n");
goto failed_ddc;
}
- psb_intel_output->hdmi_i2c_adapter = &(psb_intel_output->ddc_bus->adapter);
-
- hdmi_priv->dev = dev;
+ psb_intel_output->hdmi_i2c_adapter =
+ &(psb_intel_output->ddc_bus->adapter);
+ hdmi_priv->dev = dev;
drm_sysfs_connector_add(connector);
return;
diff --git a/drivers/staging/gma500/cdv_intel_lvds.c b/drivers/staging/gma500/cdv_intel_lvds.c
index d9b2290..19ad9bb 100644
--- a/drivers/staging/gma500/cdv_intel_lvds.c
+++ b/drivers/staging/gma500/cdv_intel_lvds.c
@@ -11,7 +11,7 @@
* more details.
*
* You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
+ * this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
* Authors:
@@ -200,7 +200,7 @@ static void cdv_intel_lvds_set_power(struct drm_device *dev,
u32 pp_status;
if (!gma_power_begin(dev, true))
- return;
+ return;
if (on) {
REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
@@ -390,7 +390,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
* This connector should only have
* been set up if the LVDS was actually connected anyway.
*/
-static enum drm_connector_status cdv_intel_lvds_detect(struct drm_connector *connector, bool force)
+static enum drm_connector_status cdv_intel_lvds_detect(
+ struct drm_connector *connector, bool force)
{
return connector_status_connected;
}
@@ -503,21 +504,24 @@ int cdv_intel_lvds_set_property(struct drm_connector *connector,
return -1;
else {
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
- struct drm_psb_private *dev_priv =
+ struct drm_psb_private *dev_priv =
encoder->dev->dev_private;
- struct backlight_device *bd = dev_priv->backlight_device;
+ struct backlight_device *bd =
+ dev_priv->backlight_device;
bd->props.brightness = value;
backlight_update_status(bd);
#endif
}
} else if (!strcmp(property->name, "DPMS") && encoder) {
- struct drm_encoder_helper_funcs *helpers = encoder->helper_private;
+ struct drm_encoder_helper_funcs *helpers =
+ encoder->helper_private;
helpers->dpms(encoder, value);
}
return 0;
}
-static const struct drm_encoder_helper_funcs cdv_intel_lvds_helper_funcs = {
+static const struct drm_encoder_helper_funcs
+ cdv_intel_lvds_helper_funcs = {
.dpms = cdv_intel_lvds_encoder_dpms,
.mode_fixup = cdv_intel_lvds_mode_fixup,
.prepare = cdv_intel_lvds_prepare,
@@ -526,7 +530,7 @@ static const struct drm_encoder_helper_funcs cdv_intel_lvds_helper_funcs = {
};
static const struct drm_connector_helper_funcs
- cdv_intel_lvds_connector_helper_funcs = {
+ cdv_intel_lvds_connector_helper_funcs = {
.get_modes = cdv_intel_lvds_get_modes,
.mode_valid = cdv_intel_lvds_mode_valid,
.best_encoder = psb_intel_best_encoder,
next prev parent reply other threads:[~2011-07-08 8:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-08 8:42 [PATCH 00/12] Fixing and cleaning Alan Cox
2011-07-08 8:42 ` [PATCH 01/12] gma500: strip unneeded version headers Alan Cox
2011-07-08 8:43 ` [PATCH 02/12] gma500: Re-order checks and dereferences in psb_intel_lvds Alan Cox
2011-07-08 20:44 ` Greg KH
2011-07-09 0:57 ` Alan Cox
2011-07-08 8:43 ` [PATCH 03/12] gma500: psb_intel_lvds style Alan Cox
2011-07-08 8:43 ` [PATCH 04/12] gma500: Fix symbol clash with i915 Alan Cox
2011-07-08 8:44 ` [PATCH 05/12] gma500: Mask out bits not part of the page table base address Alan Cox
2011-07-08 8:44 ` Alan Cox [this message]
2011-07-08 8:44 ` [PATCH 07/12] gma500: tidy the mrst files Alan Cox
2011-07-08 8:44 ` [PATCH 08/12] gma500; clean mid files Alan Cox
2011-07-08 8:45 ` [PATCH 09/12] gma500: Fix unused variable in cdv support Alan Cox
2011-07-08 8:45 ` [PATCH 10/12] Staging: gma500: typo in array initialization Alan Cox
2011-07-08 8:45 ` [PATCH 11/12] gma500: reversed test in mdfld_dbi_dsr_exit() Alan Cox
2011-07-08 8:45 ` [PATCH 12/12] gma500: remove unneeded check in mdfld_crtc_mode_set() Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110708084413.19581.64011.stgit@localhost.localdomain \
--to=alan@lxorguk.ukuu.org.uk \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.