All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vasily Khoruzhick <anarsoul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>,
	Collin Cross <ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
	Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio
Date: Fri, 15 Jul 2011 15:17:02 +0300	[thread overview]
Message-ID: <201107151517.03176.anarsoul@gmail.com> (raw)
In-Reply-To: <1310725464-2524-3-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>

On Friday 15 July 2011 13:24:22 Marc Dietrich wrote:
> This makes the WIFI rfkill gpio available to userspace. On boot,
> WIFI will be unblocked by default.

Take a look on rfkill-gpio driver.

Regards
Vasily

> Signed-off-by: Marc Dietrich <marvin24-Mmb7MZpHnFY@public.gmane.org>
> ---
>  arch/arm/mach-tegra/board-paz00-pinmux.c |    1 +
>  arch/arm/mach-tegra/board-paz00.c        |   16 ++++++++++++++++
>  arch/arm/mach-tegra/board-paz00.h        |    6 ++++++
>  3 files changed, 23 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c
> b/arch/arm/mach-tegra/board-paz00-pinmux.c index bdd2627..c02a48f 100644
> --- a/arch/arm/mach-tegra/board-paz00-pinmux.c
> +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
> @@ -145,6 +145,7 @@ static struct tegra_gpio_table gpio_table[] = {
>  	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
>  	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
>  	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
> +	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
>  };
> 
>  void paz00_pinmux_init(void)
> diff --git a/arch/arm/mach-tegra/board-paz00.c
> b/arch/arm/mach-tegra/board-paz00.c index 931b06e..0bc652b 100644
> --- a/arch/arm/mach-tegra/board-paz00.c
> +++ b/arch/arm/mach-tegra/board-paz00.c
> @@ -25,6 +25,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/pda_power.h>
>  #include <linux/io.h>
> +#include <linux/gpio.h>
>  #include <linux/i2c.h>
>  #include <linux/i2c-tegra.h>
>  #include <linux/platform_data/tegra_usb.h>
> @@ -165,6 +166,20 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 =
> { .is_8bit	= 1,
>  };
> 
> +static void __init paz00_wifi_init(void)
> +{
> +	int ret;
> +
> +	/* unlock hw rfkill */
> +	ret = gpio_request_one(TEGRA_WIFI_PWRN, GPIOF_OUT_INIT_HIGH,
> +		"wifi pwrn");
> +	if (ret) {
> +		pr_warning("WIFI: could not requestrfkill gpio\n");
> +		return;
> +	}
> +	gpio_export(TEGRA_WIFI_PWRN, 0);
> +};
> +
>  static void __init tegra_paz00_init(void)
>  {
>  	tegra_clk_init_from_table(paz00_clk_init_table);
> @@ -178,6 +193,7 @@ static void __init tegra_paz00_init(void)
> 
>  	paz00_i2c_init();
>  	paz00_usb_init();
> +	paz00_wifi_init();
>  }
> 
>  MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
> diff --git a/arch/arm/mach-tegra/board-paz00.h
> b/arch/arm/mach-tegra/board-paz00.h index d4ff39d..5d2849e 100644
> --- a/arch/arm/mach-tegra/board-paz00.h
> +++ b/arch/arm/mach-tegra/board-paz00.h
> @@ -17,11 +17,17 @@
>  #ifndef _MACH_TEGRA_BOARD_PAZ00_H
>  #define _MACH_TEGRA_BOARD_PAZ00_H
> 
> +/* SDCARD */
>  #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
>  #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
>  #define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
> +
> +/* ULPI */
>  #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
> 
> +/* WIFI */
> +#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
> +
>  void paz00_pinmux_init(void);
> 
>  #endif

WARNING: multiple messages have this Message-ID (diff)
From: anarsoul@gmail.com (Vasily Khoruzhick)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio
Date: Fri, 15 Jul 2011 15:17:02 +0300	[thread overview]
Message-ID: <201107151517.03176.anarsoul@gmail.com> (raw)
In-Reply-To: <1310725464-2524-3-git-send-email-marvin24@gmx.de>

On Friday 15 July 2011 13:24:22 Marc Dietrich wrote:
> This makes the WIFI rfkill gpio available to userspace. On boot,
> WIFI will be unblocked by default.

Take a look on rfkill-gpio driver.

Regards
Vasily

> Signed-off-by: Marc Dietrich <marvin24@gmx.de>
> ---
>  arch/arm/mach-tegra/board-paz00-pinmux.c |    1 +
>  arch/arm/mach-tegra/board-paz00.c        |   16 ++++++++++++++++
>  arch/arm/mach-tegra/board-paz00.h        |    6 ++++++
>  3 files changed, 23 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c
> b/arch/arm/mach-tegra/board-paz00-pinmux.c index bdd2627..c02a48f 100644
> --- a/arch/arm/mach-tegra/board-paz00-pinmux.c
> +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
> @@ -145,6 +145,7 @@ static struct tegra_gpio_table gpio_table[] = {
>  	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
>  	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
>  	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
> +	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
>  };
> 
>  void paz00_pinmux_init(void)
> diff --git a/arch/arm/mach-tegra/board-paz00.c
> b/arch/arm/mach-tegra/board-paz00.c index 931b06e..0bc652b 100644
> --- a/arch/arm/mach-tegra/board-paz00.c
> +++ b/arch/arm/mach-tegra/board-paz00.c
> @@ -25,6 +25,7 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/pda_power.h>
>  #include <linux/io.h>
> +#include <linux/gpio.h>
>  #include <linux/i2c.h>
>  #include <linux/i2c-tegra.h>
>  #include <linux/platform_data/tegra_usb.h>
> @@ -165,6 +166,20 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 =
> { .is_8bit	= 1,
>  };
> 
> +static void __init paz00_wifi_init(void)
> +{
> +	int ret;
> +
> +	/* unlock hw rfkill */
> +	ret = gpio_request_one(TEGRA_WIFI_PWRN, GPIOF_OUT_INIT_HIGH,
> +		"wifi pwrn");
> +	if (ret) {
> +		pr_warning("WIFI: could not requestrfkill gpio\n");
> +		return;
> +	}
> +	gpio_export(TEGRA_WIFI_PWRN, 0);
> +};
> +
>  static void __init tegra_paz00_init(void)
>  {
>  	tegra_clk_init_from_table(paz00_clk_init_table);
> @@ -178,6 +193,7 @@ static void __init tegra_paz00_init(void)
> 
>  	paz00_i2c_init();
>  	paz00_usb_init();
> +	paz00_wifi_init();
>  }
> 
>  MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
> diff --git a/arch/arm/mach-tegra/board-paz00.h
> b/arch/arm/mach-tegra/board-paz00.h index d4ff39d..5d2849e 100644
> --- a/arch/arm/mach-tegra/board-paz00.h
> +++ b/arch/arm/mach-tegra/board-paz00.h
> @@ -17,11 +17,17 @@
>  #ifndef _MACH_TEGRA_BOARD_PAZ00_H
>  #define _MACH_TEGRA_BOARD_PAZ00_H
> 
> +/* SDCARD */
>  #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
>  #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
>  #define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
> +
> +/* ULPI */
>  #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
> 
> +/* WIFI */
> +#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
> +
>  void paz00_pinmux_init(void);
> 
>  #endif

  parent reply	other threads:[~2011-07-15 12:17 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-15 10:24 [PATCH 0/3] ARM: tegra: paz00: Add Wifi and second serial port support Marc Dietrich
2011-07-15 10:24 ` Marc Dietrich
     [not found] ` <1310725464-2524-1-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 10:24   ` [PATCH 1/3] ARM: tegra: paz00: add support serial port on JP1 Marc Dietrich
2011-07-15 10:24     ` Marc Dietrich
     [not found]     ` <1310725464-2524-2-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 16:39       ` Stephen Warren
2011-07-15 16:39         ` Stephen Warren
     [not found]         ` <74CDBE0F657A3D45AFBB94109FB122FF049E834C23-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-07-16 15:59           ` Marc Dietrich
2011-07-16 15:59             ` Marc Dietrich
2011-07-15 10:24   ` [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio Marc Dietrich
2011-07-15 10:24     ` Marc Dietrich
     [not found]     ` <1310725464-2524-3-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 12:17       ` Vasily Khoruzhick [this message]
2011-07-15 12:17         ` Vasily Khoruzhick
     [not found]         ` <201107151517.03176.anarsoul-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2011-07-22 20:38           ` Marc Dietrich
2011-07-22 20:38             ` Marc Dietrich
2011-07-15 16:53       ` Stephen Warren
2011-07-15 16:53         ` Stephen Warren
     [not found]         ` <74CDBE0F657A3D45AFBB94109FB122FF049E834C2F-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-07-15 17:25           ` Sergei Shtylyov
2011-07-15 17:25             ` Sergei Shtylyov
     [not found]             ` <4E2077EC.1070902-hkdhdckH98+B+jHODAdFcQ@public.gmane.org>
2011-07-15 17:30               ` Stephen Warren
2011-07-15 17:30                 ` Stephen Warren
2011-07-15 10:24   ` [PATCH 3/3] ARM: tegra: paz00: enable wifi led Marc Dietrich
2011-07-15 10:24     ` Marc Dietrich
     [not found]     ` <1310725464-2524-4-git-send-email-marvin24-Mmb7MZpHnFY@public.gmane.org>
2011-07-15 17:10       ` Stephen Warren
2011-07-15 17:10         ` Stephen Warren
     [not found]         ` <74CDBE0F657A3D45AFBB94109FB122FF049E834C43-C7FfzLzN0UxDw2glCA4ptUEOCMrvLtNR@public.gmane.org>
2011-07-16 16:19           ` Marc Dietrich
2011-07-16 16:19             ` Marc Dietrich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201107151517.03176.anarsoul@gmail.com \
    --to=anarsoul-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=ccross-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marvin24-Mmb7MZpHnFY@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.