From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lrg@ti.com>
Subject: ASoC updates for 3.1
Date: Mon, 18 Jul 2011 19:43:41 +0900 [thread overview]
Message-ID: <20110718104340.GB7775@opensource.wolfsonmicro.com> (raw)
The following changes since commit e320bc42be746b8f006d163b6e340e5fb79ce7b2:
Merge branch 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc (2011-07-09 11:43:04 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-3.1
Axel Lin (1):
ASoC: wm8900: fix a memory leak if wm8900_set_fll fails
Dimitris Papastamos (1):
ASoC: WM8983: Initial driver
Giridhar Maruthy (1):
ASoC: SAMSUNG: 24-bit audio playback on Exynos4210
Jarkko Nikula (2):
ASoC: tlv320aic3x: Don't sync first two registers from register cache
ASoC: tlv320aic3x: Do soft reset to codec when going to bias off state
Johannes Stezenbach (2):
ASoC: STA32x: Add mixer controls for biquad coefficients
ASoC: STA32x: Preserve reserved register bits
Kuninori Morimoto (3):
ASoC: sh: fsi-ak4642: fixup snd_soc_card name
ASoC: sh: fsi-da7210: fixup snd_soc_card name
ASoC: sh: fsi-hdmi: fixup snd_soc_card name
Mark Brown (19):
Merge branch 'for-3.0' into for-3.1
Merge branch 'for-3.0' into for-3.1
Merge branch 'topic/asoc' of git://git.kernel.org/.../tiwai/sound-2.6 into for-3.1
ASoC: Conditionalize the enable of WM8994 ADC TDM mode
ASoC: Use late enable handling for direct voice, speaker and headphone
ASoC: Implement DC servo completion IRQ handling for wm_hubs devices
ASoC: Hook up DC servo completion IRQ for WM8994 and WM8958
ASoC: Use WM8994 FLL lock interrupt
ASoC: Don't warn on low WM8994/58 AIFnCLKs
ASoC: Log WM8994 FIFO errors from the interrupt
ASoC: Fix shift in WM8958 accessory detection default implementation
Merge branch 'for-3.0' into for-3.1
ASoC: Handle spurious wm_hubs DC servo done interrupts
ASoC: Handle failed WM8994 FLL lock waits
ASoC: Report an error for unknown adav80x formats
ASoC: Reduce power consumption for idle DAIs in WM8994
ASoC: Don't use -1 to boostrap subseq so it can be used by drivers
ASoC: Correct WM8994 MICBIAS supply widget hookup
Merge branch 'for-3.0' into for-3.1
Michael Williamson (1):
audio: tlv320aic26: fix PLL register configuration
Takashi Iwai (4):
Merge branch 'for-3.0' of git://git.kernel.org/.../lrg/asoc-2.6 into fix/asoc
Merge branch 'for-3.0' of git://git.kernel.org/.../broonie/sound-2.6 into fix/asoc
ASoC: Don't set invalid name string to snd_card->driver field
Merge branch 'for-3.0' of git://git.kernel.org/.../broonie/sound-2.6 into fix/asoc
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/adav80x.c | 4 +-
sound/soc/codecs/sta32x.c | 140 +++++
sound/soc/codecs/tlv320aic26.c | 14 +-
sound/soc/codecs/tlv320aic3x.c | 9 +-
sound/soc/codecs/wm8900.c | 1 +
sound/soc/codecs/wm8983.c | 1203 +++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/wm8983.h | 1029 +++++++++++++++++++++++++++++++++
sound/soc/codecs/wm8993.c | 2 +-
sound/soc/codecs/wm8994.c | 156 +++++-
sound/soc/codecs/wm8994.h | 3 +
sound/soc/codecs/wm_hubs.c | 33 +-
sound/soc/codecs/wm_hubs.h | 8 +
sound/soc/samsung/smdk_wm8994.c | 5 +-
sound/soc/sh/fsi-ak4642.c | 16 +-
sound/soc/sh/fsi-da7210.c | 2 +-
sound/soc/sh/fsi-hdmi.c | 4 +-
sound/soc/soc-core.c | 5 +-
sound/soc/soc-dapm.c | 2 +-
20 files changed, 2593 insertions(+), 49 deletions(-)
create mode 100644 sound/soc/codecs/wm8983.c
create mode 100644 sound/soc/codecs/wm8983.h
next reply other threads:[~2011-07-18 10:43 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-18 10:43 Mark Brown [this message]
2011-07-18 11:12 ` ASoC updates for 3.1 Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2011-10-04 13:47 Mark Brown
2011-10-04 14:11 ` Takashi Iwai
2011-10-04 14:23 ` Mark Brown
2011-10-04 14:38 ` Takashi Iwai
2011-09-27 12:31 Mark Brown
2011-09-27 12:44 ` Takashi Iwai
2011-09-22 17:17 Mark Brown
2011-09-22 18:02 ` Takashi Iwai
2011-09-26 5:27 ` Scott Jiang
2011-09-26 12:36 ` Mark Brown
2011-09-08 18:22 Mark Brown
2011-08-25 11:07 Mark Brown
2011-08-25 12:08 ` Takashi Iwai
2011-08-21 12:08 Mark Brown
2011-08-21 13:47 ` Takashi Iwai
2011-08-21 16:00 ` Mark Brown
2011-08-21 16:25 ` Takashi Iwai
2011-08-21 16:46 ` Mark Brown
2011-08-12 16:11 Mark Brown
2011-08-12 16:26 ` Takashi Iwai
2011-08-04 4:11 Mark Brown
2011-08-04 14:21 ` Takashi Iwai
2011-07-25 7:05 Mark Brown
2011-07-25 7:42 ` Takashi Iwai
2011-07-13 23:58 Mark Brown
2011-07-09 9:20 Mark Brown
2011-07-05 6:16 Mark Brown
2011-07-05 6:22 ` Takashi Iwai
2011-06-24 10:36 Mark Brown
2011-06-24 10:59 ` Takashi Iwai
2011-06-10 12:03 Mark Brown
2011-06-10 12:04 ` Mark Brown
2011-06-10 12:23 ` Takashi Iwai
2011-05-30 3:20 Mark Brown
2011-06-02 17:54 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110718104340.GB7775@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=lrg@ti.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.