From mboxrd@z Thu Jan 1 00:00:00 1970 From: "John Smith" Date: Mon, 25 Jul 2011 09:25:33 +0000 Subject: Re: [lm-sensors] Config for Gigabyte GA-G31M-ES2L Message-Id: <20110725092534.315740@gmx.com> List-Id: References: <20110725080443.315720@gmx.com> In-Reply-To: <20110725080443.315720@gmx.com> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: lm-sensors@vger.kernel.org On the other hand,after more looking into it , inputs in4 and in7 might be different in4 might be representing +12V using unusual scaling and in7 might be +5VSB > > chip "it8718-*" > > ### Voltages > >    label  in0  "Vcore" >    label  in1  "DDR18V"    # "DDR18V" in BIOS >    label  in2  "+3.3V" >    label  in3  "+5V"     # Not in BIOS >    label  in4  "in4"     # Not in BIOS Misterious ?? 0.34v idle; 0.62v under load >    ignore in5         # raw reads: +4.08 V >    ignore in6         # raw reads: +4.08 V >    label  in7  "+12V" > # i think in8 should be ignored too ,verbatim from G33-DS3R >    label  in8  "Vbat"    # Not in BIOS,raw reads +3.14 V as in7 ?? -- _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors