diff for duplicates of <20110726210605.GA18994@dumpdata.com> diff --git a/a/1.txt b/N1/1.txt index 836f2d2..1c45816 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -79,426 +79,426 @@ index f987bde..1668deb 100644 It boots up fine: -(early) [ 0.000000] Initializing cgroup subsys cpuset -(early) [ 0.000000] Initializing cgroup subsys cpu -(early) [ 0.000000] Linux version 3.0.0-05046-ge08dc13-dirty (konrad@phenom) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP PREEMPT Tue Jul 26 16:54:34 EDT 2011 -(early) [ 0.000000] Command line: console=hvc0 debug earlyprintk=xenboot test=test -(early) [ 0.000000] ACPI in unprivileged domain disabled -(early) [ 0.000000] released 0 pages of unused memory -(early) [ 0.000000] Set 0 page(s) to 1-1 mapping. -(early) [ 0.000000] BIOS-provided physical RAM map: -(early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) -(early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -(early) [ 0.000000] Xen: 0000000000100000 - 0000000080800000 (usable) -(early) [ 0.000000] bootconsole [xenboot0] enabled -(early) [ 0.000000] NX (Execute Disable) protection: active -(early) [ 0.000000] DMI not present or invalid. -(early) [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (early) (usable)(early) ==> (early) (reserved)(early) -(early) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (early) (usable)(early) -(early) [ 0.000000] No AGP bridge found -(early) [ 0.000000] last_pfn = 0x80800 max_arch_pfn = 0x400000000 -(early) [ 0.000000] initial memory mapped : 0 - 1028f000 -(early) [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480 -(early) [ 0.000000] init_memory_mapping: 0000000000000000-0000000080800000 -(early) [ 0.000000] 0000000000 - 0080800000 page 4k -(early) [ 0.000000] kernel direct mapping tables up to 80800000 @ 7fbf8000-80000000 -(early) [ 0.000000] xen: setting RW the range 7ff76000 - 80000000 -(early) [ 0.000000] RAMDISK: 01b76000 - 1028f000 -(early) [ 0.000000] No NUMA configuration found -(early) [ 0.000000] Faking a node at 0000000000000000-0000000080800000 -(early) [ 0.000000] Initmem setup node 0 0000000000000000-0000000080800000 -(early) [ 0.000000] NODE_DATA [000000007fffb000 - 000000007fffffff] -(early) [ 0.000000] Zone PFN ranges: -(early) [ 0.000000] DMA (early) 0x00000010 -> 0x00001000 -(early) [ 0.000000] DMA32 (early) 0x00001000 -> 0x00100000 -(early) [ 0.000000] Normal (early) empty -(early) [ 0.000000] Movable zone start PFN for each node -(early) [ 0.000000] early_node_map[2] active PFN ranges -(early) [ 0.000000] 0: 0x00000010 -> 0x000000a0 -(early) [ 0.000000] 0: 0x00000100 -> 0x00080800 -(early) [ 0.000000] On node 0 totalpages: 526224 -(early) [ 0.000000] DMA zone: 56 pages used for memmap -(early) [ 0.000000] DMA zone: 5 pages reserved -(early) [ 0.000000] DMA zone: 3923 pages, LIFO batch:0 -(early) [ 0.000000] DMA32 zone: 7140 pages used for memmap -(early) [ 0.000000] DMA32 zone: 515100 pages, LIFO batch:31 -(early) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs -(early) [ 0.000000] No local APIC present -(early) [ 0.000000] APIC: disable apic facility -(early) [ 0.000000] APIC: switched to apic NOOP -(early) [ 0.000000] nr_irqs_gsi: 16 -(early) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 -(early) [ 0.000000] Allocating PCI resources starting at 80800000 (gap: 80800000:7f800000) -(early) [ 0.000000] Booting paravirtualized kernel on Xen -(early) [ 0.000000] Xen version: 4.2-unstable (preserve-AD) -(early) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 -(early) [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fb88000 s82048 r8192 d24448 u114688 -(early) [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u114688 alloc=28*4096(early) -(early) [ 0.000000] pcpu-alloc: (early) [0] (early) 0 (early) [0] (early) 1 (early) [0] (early) 2 (early) [0] (early) 3 (early) -(early) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 519023 -(early) [ 0.000000] Policy zone: DMA32 -(early) [ 0.000000] Kernel command line: console=hvc0 debug earlyprintk=xenboot test=test -(early) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) -(early) [ 0.000000] Checking aperture... -(early) [ 0.000000] No AGP bridge found -(early) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area -(early) [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! -(early) [ 0.000000] Memory: 1810140k/2105344k available (5942k kernel code, 448k absent, 294756k reserved, 2808k data, 692k init) -(early) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 -(early) [ 0.000000] Preemptible hierarchical RCU implementation. -(early) [ 0.000000] NR_IRQS:16640 nr_irqs:304 16 -(early) [ 0.000000] Console: colour dummy device 80x25 -(early) [ 0.000000] console [tty0] enabled -[ 0.000000] console [hvc0] enabled, bootconsole disabled -(early) [ 0.000000] console [hvc0] enabled, bootconsole disabled -[ 0.000000] Xen: using vcpuop timer interface -[ 0.000000] installing Xen timer for CPU 0 -[ 0.000000] Detected 3000.212 MHz processor. -[ 0.000000] Marking TSC unstable due to TSCs unsynchronized -[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.42 BogoMIPS (lpj=3000212) -[ 0.000999] pid_max: default: 32768 minimum: 301 -[ 0.000999] Security Framework initialized -[ 0.000999] SELinux: Initializing. -[ 0.000999] SELinux: Starting in permissive mode -[ 0.000999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) -[ 0.001199] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) -[ 0.001446] Mount-cache hash table entries: 256 -[ 0.001596] Initializing cgroup subsys cpuacct -[ 0.001604] Initializing cgroup subsys freezer -[ 0.001642] tseg: 0000000000 -[ 0.001653] CPU: Physical Processor ID: 0 -[ 0.001657] CPU: Processor Core ID: 1 -[ 0.001707] SMP alternatives: switching to UP code -[ 0.002069] cpu 0 spinlock event irq 17 -[ 0.002115] Performance Events: -[ 0.002119] no APIC, boot with the "lapic" boot parameter to force-enable it. -[ 0.002125] no hardware sampling interrupt available. -[ 0.002147] Broken PMU hardware detected, using software events only. -[ 0.008049] MCE: In-kernel MCE decoding enabled. -[ 0.008074] NMI watchdog disabled (cpu0): hardware events not enabled -[ 0.014060] installing Xen timer for CPU 1 -[ 0.014117] cpu 1 spinlock event irq 23 -[ 0.014194] SMP alternatives: switching to SMP code -[ 0.015186] NMI watchdog disabled (cpu1): hardware events not enabled -[ 0.021063] installing Xen timer for CPU 2 -[ 0.021118] cpu 2 spinlock event irq 29 -[ 0.021368] NMI watchdog disabled (cpu2): hardware events not enabled -[ 0.027068] installing Xen timer for CPU 3 -[ 0.027120] cpu 3 spinlock event irq 35 -[ 0.027357] NMI watchdog disabled (cpu3): hardware events not enabled -[ 0.029063] Brought up 4 CPUs -[ 0.029307] kworker/u:0 used greatest stack depth: 5496 bytes left -[ 0.029307] Grant table initialized -[ 0.048886] RTC time: 165:165:165, date: 165/165/65 -[ 0.048951] NET: Registered protocol family 16 -[ 0.049047] Extended Config Space enabled on 0 nodes -[ 0.050350] PCI: setting up Xen PCI frontend stub -[ 0.050358] PCI: pci_cache_line_size set to 64 bytes -[ 0.059241] bio: create slab <bio-0> at 0 -[ 0.060017] ACPI: Interpreter disabled. -[ 0.060036] xen/balloon: Initialising balloon driver. -[ 0.060036] last_pfn = 0x80800 max_arch_pfn = 0x400000000 -[ 0.062260] xen-balloon: Initialising balloon driver. -[ 0.063073] vgaarb: loaded -[ 0.063073] usbcore: registered new interface driver usbfs -[ 0.063073] usbcore: registered new interface driver hub -[ 0.063073] usbcore: registered new device driver usb -[ 0.064030] PCI: System does not support PCI -[ 0.064030] PCI: System does not support PCI -[ 0.064053] NetLabel: Initializing -[ 0.064053] NetLabel: domain hash size = 128 -[ 0.064053] NetLabel: protocols = UNLABELED CIPSOv4 -[ 0.064053] NetLabel: unlabeled traffic allowed by default -[ 0.064076] Switching to clocksource xen -[ 0.064076] Switched to NOHz mode on CPU #3 -[ 0.064414] Switched to NOHz mode on CPU #0 -[ 0.064996] Switched to NOHz mode on CPU #2 -[ 0.065113] Switched to NOHz mode on CPU #1 -[ 0.066290] pnp: PnP ACPI: disabled -[ 0.071025] PCI: max bus depth: 0 pci_try_num: 1 -[ 0.071084] NET: Registered protocol family 2 -[ 0.071274] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) -[ 0.072620] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) -[ 0.073896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) -[ 0.074185] TCP: Hash tables configured (established 262144 bind 65536) -[ 0.074194] TCP reno registered -[ 0.074215] UDP hash table entries: 1024 (order: 3, 32768 bytes) -[ 0.074239] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) -[ 0.074332] NET: Registered protocol family 1 -[ 0.074583] RPC: Registered named UNIX socket transport module. -[ 0.074592] RPC: Registered udp transport module. -[ 0.074597] RPC: Registered tcp transport module. -[ 0.074601] RPC: Registered tcp NFSv4.1 backchannel transport module. -[ 0.074609] PCI: CLS 0 bytes, default 64 -[ 0.074726] Trying to unpack rootfs image as initramfs... -[ 0.316784] Freeing initrd memory: 236644k freed -[ 0.377411] platform rtc_cmos: registered platform RTC device (no PNP device found) -[ 0.378778] Machine check injector initialized -[ 0.379554] microcode: CPU0: patch_level=0x010000bf -[ 0.379574] microcode: CPU1: patch_level=0x010000bf -[ 0.379621] microcode: CPU2: patch_level=0x010000bf -[ 0.379671] microcode: CPU3: patch_level=0x010000bf -[ 0.379748] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba -[ 0.380129] audit: initializing netlink socket (disabled) -[ 0.380147] type=2000 audit(1311714191.306:1): initialized -[ 0.394045] HugeTLB registered 2 MB page size, pre-allocated 0 pages -[ 0.399695] VFS: Disk quotas dquot_6.5.2 -[ 0.399844] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) -[ 0.400589] NTFS driver 2.1.30 [Flags: R/W]. -[ 0.400895] msgmni has been set to 3997 -[ 0.401041] SELinux: Registering netfilter hooks -[ 0.401781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) -[ 0.401790] io scheduler noop registered -[ 0.401794] io scheduler deadline registered -[ 0.401908] io scheduler cfq registered (default) -[ 0.402285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 -[ 0.450645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled -[ 0.514817] Non-volatile memory driver v1.3 -[ 0.514826] Linux agpgart interface v0.103 -[ 0.515298] [drm] Initialized drm 1.1.0 20060810 -[ 0.518170] brd: module loaded -[ 0.519592] loop: module loaded -[ 0.520265] Fixed MDIO Bus: probed -[ 0.520797] tun: Universal TUN/TAP device driver, 1.6 -[ 0.520804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> -[ 0.521202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -[ 0.521211] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 -[ 0.521303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -[ 0.521310] ohci_hcd: block sizes: ed 80 td 96 -[ 0.521400] uhci_hcd: USB Universal Host Controller Interface driver -[ 0.521570] usbcore: registered new interface driver usblp -[ 0.521649] usbcore: registered new interface driver libusual -[ 0.521944] i8042: PNP: No PS/2 controller found. Probing ports directly. -[ 0.522766] i8042: No controller found -[ 0.523049] mousedev: PS/2 mouse device common for all mice -[ 0.563573] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 -[ 0.563697] rtc_cmos: probe of rtc_cmos failed with error -38 -[ 0.564012] cpuidle: using governor ladder -[ 0.564018] cpuidle: using governor menu -[ 0.564023] EFI Variables Facility v0.08 2004-May-17 -[ 0.564118] zram: num_devices not specified. Using default: 1 -[ 0.564125] zram: Creating 1 devices ... -[ 0.564504] Netfilter messages via NETLINK v0.30. -[ 0.564525] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) -[ 0.564828] ctnetlink v0.93: registering with nfnetlink. -[ 0.565311] ip_tables: (C) 2000-2006 Netfilter Core Team -[ 0.565346] TCP cubic registered -[ 0.565351] Initializing XFRM netlink socket -[ 0.565760] NET: Registered protocol family 10 -[ 0.566372] ip6_tables: (C) 2000-2006 Netfilter Core Team -[ 0.566433] IPv6 over IPv4 tunneling driver -[ 0.567372] NET: Registered protocol family 17 -[ 0.567408] Registering the dns_resolver key type -[ 0.567985] PM: Hibernation image not present or could not be loaded. -[ 0.568005] registered taskstats version 1 -[ 0.568041] XENBUS: Device with no driver: device/vif/0 -[ 0.568046] XENBUS: Device with no driver: device/vfb/0 -[ 0.568052] XENBUS: Device with no driver: device/vkbd/0 -[ 0.568065] Magic number: 1:252:3141 -[ 0.568211] powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (4 cpu cores) (version 2.20.00) -[ 0.568237] powernow-k8: Core Performance Boosting: on. -[ 0.568253] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. -[ 0.568254] [Firmware Bug]: powernow-k8: Try again with latest BIOS. -[ 0.568769] Freeing unused kernel memory: 692k freed -[ 0.568966] Write protecting the kernel read-only data: 8192k -[ 0.572048] Freeing unused kernel memory: 180k freed -[ 0.572251] Freeing unused kernel memory: 328k freed -\rinit started: BusyBox v1.14.3 (2011-07-26 16:55:54 EDT) -[ 0.579282] consoletype used greatest stack depth: 5376 bytes left -Mounting directories [ OK ]\r -[ 0.799316] modprobe used greatest stack depth: 5136 bytes left -mount: mount point /sys/kernel/config does not exist -[ 0.806063] core_filesystem used greatest stack depth: 5024 bytes left -[ 0.818750] input: Xen Virtual Keyboard as /devices/virtual/input/input0 -[ 0.819044] input: Xen Virtual Pointer as /devices/virtual/input/input1 -[ 1.041570] Initialising Xen virtual ethernet driver. -[ 1.158627] ------------[ cut here ]------------ -[ 1.158669] WARNING: at /home/konrad/ssd/linux/fs/proc/base.c:1123 oom_adjust_write+0x294/0x2b0() -[ 1.158677] udevd (1192): /proc/1192/oom_adj is deprecated, please use /proc/1192/oom_score_adj instead. -[ 1.158685] Modules linked in: xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs -[ 1.158711] Pid: 1192, comm: udevd Not tainted 3.0.0-05046-ge08dc13-dirty #1 -[ 1.158717] Call Trace: -[ 1.158725] [<ffffffff810921da>] warn_slowpath_common+0x7a/0xb0 -[ 1.158733] [<ffffffff810922b1>] warn_slowpath_fmt+0x41/0x50 -[ 1.158740] [<ffffffff8109de85>] ? ns_capable+0x25/0x60 -[ 1.158747] [<ffffffff811d4d44>] oom_adjust_write+0x294/0x2b0 -[ 1.158755] [<ffffffff81175698>] vfs_write+0xc8/0x190 -[ 1.158761] [<ffffffff8117584c>] sys_write+0x4c/0x90 -[ 1.158769] [<ffffffff815c8512>] system_call_fastpath+0x16/0x1b -[ 1.158775] ---[ end trace 53a836e564b32553 ]--- -[ 1.289040] ip used greatest stack depth: 3936 bytes left -Waiting for devices [ OK ]\r -Waiting for fb [ OK ]\r -Starting..[/dev/fb0] -/dev/fb0: len:0 -/dev/fb0: bits/pixel32 -(7fdbfe873000): Writting .. [800:600] -Done! -FATAL: Module agpgart_intel not found. -[ 1.420253] Console: switching to colour frame buffer device 100x37 -[ 1.462964] [drm] radeon kernel modesetting enabled. -WARNING: Error inserting wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/wmi.ko): No such device -WARNING: Error inserting mxm_wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/mxm-wmi.ko): No such device -WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device -WARNING: Error inserting ttm (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device -FATAL: Error inserting nouveau (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device -WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device -FATAL: Error inserting i915 (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device -Starting..[/dev/fb0] -/dev/fb0: len:0 -/dev/fb0: bits/pixel32 -(7fecfee0e000): Writting .. [800:600] -Done! -VGA: 0000: -Waiting for network [ OK ]\r -Bringing up loopback interface: [ OK ]\r -Bringing up interface eth0: [ 1.785668] device eth0 entered promiscuous mode -[ OK ]\r -Bringing up interface switch: -Determining IP information for switch...[ 1.843220] switch: port 1(eth0) entering forwarding state -[ 1.843271] switch: port 1(eth0) entering forwarding state - done. -[ OK ]\r -Waiting for init.custom [ OK ]\r -Start sshd -PING master.dumpdata.com (192.168.101.1) 56(84) bytes of data. - ---- master.dumpdata.com ping statistics --- -1 packets transmitted, 1 received, 0% packet loss, time 1ms -rtt min/avg/max/mdev = 0.365/0.365/0.365/0.000 ms -mount.nfs: rpc.statd is not running but is required for remote locking. -mount.nfs: Either use '-o nolock' to keep locks local, or start statd. -mount.nfs: an incorrect mount option was specified - -Starting SSHd ... -[ 3.190254] mount.nfs used greatest stack depth: 3648 bytes left -[ 3.193509] [drm] Module unloaded -ERROR: Module nouveau does not exist in /proc/modules -libxl: error: libxl.c:61:libxl_ctx_alloc: Is xenstore daemon running? -failed to stat /var/run/xenstored.pid: No such file or directory -cannot init xl context -Waiting for SSHd [ OK ]\r -WARNING: ssh currently running [2319] ignoring start request -[ 3.359346] SCSI subsystem initialized -[ 3.361222] Loading iSCSI transport class v2.0-870. -[ 3.364431] iscsi: registered transport (tcp) -iscsistart: transport class version 2.0-870. iscsid version 2.0-872 -Could not get list of targets from firmware. -Jul 26 21:03:14 g-pvops syslogd 1.5.0: restart.\r -FATAL: Module evtchn not found. -[ 3.400467] Event-channel device installed. -xencommons should be started first. - CPU0 CPU1 CPU2 CPU3 - 16: 1720 0 0 0 xen-percpu-virq timer0 - 17: 8 0 0 0 xen-percpu-ipi spinlock0 - 18: 2432 0 0 0 xen-percpu-ipi resched0 - 19: 162 0 0 0 xen-percpu-ipi callfunc0 - 20: 0 0 0 0 xen-percpu-virq debug0 - 21: 105 0 0 0 xen-percpu-ipi callfuncsingle0 - 22: 0 1724 0 0 xen-percpu-virq timer1 - 23: 0 11 0 0 xen-percpu-ipi spinlock1 - 24: 0 2050 0 0 xen-percpu-ipi resched1 - 25: 0 139 0 0 xen-percpu-ipi callfunc1 - 26: 0 0 0 0 xen-percpu-virq debug1 - 27: 0 84 0 0 xen-percpu-ipi callfuncsingle1 - 28: 0 0 1345 0 xen-percpu-virq timer2 - 29: 0 0 23 0 xen-percpu-ipi spinlock2 - 30: 0 0 671 0 xen-percpu-ipi resched2 - 31: 0 0 161 0 xen-percpu-ipi callfunc2 - 32: 0 0 0 0 xen-percpu-virq debug2 - 33: 0 0 101 0 xen-percpu-ipi callfuncsingle2 - 34: 0 0 0 1684 xen-percpu-virq timer3 - 35: 0 0 0 15 xen-percpu-ipi spinlock3 - 36: 0 0 0 1437 xen-percpu-ipi resched3 - 37: 0 0 0 156 xen-percpu-ipi callfunc3 - 38: 0 0 0 0 xen-percpu-virq debug3 - 39: 0 0 0 118 xen-percpu-ipi callfuncsingle3 - 40: 404 0 0 0 xen-dyn-event xenbus - 41: 71 0 0 0 xen-dyn-event hvc_console - 42: 0 0 0 0 xen-dyn-event vkbd - 43: 70 0 0 0 xen-dyn-event vfb - 44: 107 0 0 0 xen-dyn-event eth0 -NMI: 0 0 0 0 Non-maskable interrupts -LOC: 0 0 0 0 Local timer interrupts -SPU: 0 0 0 0 Spurious interrupts -PMI: 0 0 0 0 Performance monitoring interrupts -IWI: 0 0 0 0 IRQ work interrupts -RES: 2432 2050 671 1437 Rescheduling interrupts -CAL: 267 223 262 274 Function call interrupts -TLB: 0 0 0 0 TLB shootdowns -TRM: 0 0 0 0 Thermal event interrupts -THR: 0 0 0 0 Threshold APIC interrupts -MCE: 0 0 0 0 Machine check exceptions -MCP: 0 0 0 0 Machine check polls -ERR: 0 -MIS: 0 -00000000-0000ffff : reserved -00010000-0009ffff : System RAM -000a0000-000fffff : reserved - 000f0000-000fffff : System ROM -00100000-807fffff : System RAM - 01000000-015cd9bb : Kernel code - 015cd9bc-0188bbff : Kernel data - 01941000-01a3ffff : Kernel bss -Starting test testcase.. -Jul 26 21:03:14 g-pvops init: starting pid 2436, tty '/dev/tty0': '/bin/sh'\r -Jul 26 21:03:14 g-pvops init: starting pid 2437, tty '/dev/tty1': '/bin/sh'\r -Jul 26 21:03:14 g-pvops init: starting pid 2438, tty '/dev/ttyS0': '/bin/sh'\r - - ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.9 |~~~~~~~~~~~~~~~~~~~~~~~~~~ - (c) 2001-2010 The world wide DirectFB Open Source Community - (c) 2000-2004 Convergence (integrated media) GmbH - ---------------------------------------------------------------- - -(*) DirectFB/Core: Single Application Core. (2011-07-26 20:56) -Jul 26 21:03:14 g-pvops init: starting pid 2439, tty '/dev/hvc0': '/bin/sh'\r -(*) Direct/Memcpy: Using libc memcpy() -sh-4.1# (*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>... -(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>... -(*) DirectFB/FBDev: Found 'xen' (ID 0) with frame buffer at 0x00000000, 2048k (MMIO 0x00000000, 0k) -(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>... -(*) DirectFB/Input: Keyboard 0.9 (directfb.org) -(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>... -(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org) -(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>... -(*) DirectFB/Input: Xen Virtual Keyboard (1) 0.1 (directfb.org) -(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>... -(*) DirectFB/Input: Xen Virtual Pointer (2) 0.1 (directfb.org) -(*) Direct/Thread: Started 'Hotplug with Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>... -(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver -(*) DirectFB/Genefx: MMX detected and enabled -(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org) -(*) DirectFB/Core/WM: Default 0.3 (directfb.org) -(*) FBDev/Mode: Setting 800x600 RGB32 -(*) FBDev/Mode: Switched to 800x600 (virtual 800x600) at 32 bit (RGB32), pitch 3200 - - SSH started [2319] - - -Jul 26 21:03:15 g-pvops iscsid: transport class version 2.0-870. iscsid version 2.0-872\r -Jul 26 21:03:15 g-pvops iscsid: iSCSI daemon with pid=2400 started!\r -Jul 26 21:03:15 g-pvops init: process '/bin/sh' (pid 2438) exited. Scheduling for restart.\r -Jul 26 21:03:15 g-pvops init: starting pid 2452, tty '/dev/ttyS0': '/bin/sh'\r -Jul 26 21:03:16 g-pvops init: process '/bin/sh' (pid 2452) exited. Scheduling for restart.\r -Jul 26 21:03:16 g-pvops init: starting pid 2453, tty '/dev/ttyS0': '/bin/sh'\r -Jul 26 21:03:17 g-pvops init: process '/bin/sh' (pid 2453) exited. Scheduling for restart.\r -Jul 26 21:03:17 g-pvops init: starting pid 2454, tty '/dev/ttyS0': '/bin/sh'\r -Jul 26 21:03:18 g-pvops init: process '/bin/sh' (pid 2454) exited. Scheduling for restart.\r -Jul 26 21:03:18 g-pvops init: starting pid 2455, tty '/dev/ttyS0': '/bin/sh'\r -poweroJul 26 21:03:19 g-pvops init: process '/bin/sh' (pid 2455) exited. Scheduling for restart.\r -Jul 26 21:03:19 g-pvops init: starting pid 2457, tty '/dev/ttyS0': '/bin/sh'\r -ff -Jul 26 21:03:19 g-pvops init: starting pid 2460, tty '': '/etc/init.d/halt'\r -sh-4.1# Usage: /etc/init.d/halt {start} -\rThe system is going down NOW! -Jul 26 21:03:19Jul 26 21:03:19 g-pvops \rSent SIGTERM to all processes -(!) [ 2435: 0.000] --> Caught signal 15 (sent by pid 1, uid 0) <-- - (!!!) *** WARNING [still objects in 'Window Pool'] *** [object.c:241 in fusion_object_pool_destroy()] - (!!!) *** WARNING [still objects in 'Layer Region Pool'] *** [object.c:241 in fusion_object_pool_destroy()] - (!!!) *** WARNING [still objects in 'Layer Context Pool'] *** [object.c:241 in fusion_object_pool_destroy()] - (!!!) *** WARNING [still objects in 'Surface Pool'] *** [object.c:241 in fusion_object_pool_destroy()] -\rSent SIGKILL to all processes -\rRequesting system poweroff -[ 10.925177] System halted. +(early) [ 0.000000] Initializing cgroup subsys cpuset\r +(early) [ 0.000000] Initializing cgroup subsys cpu\r +(early) [ 0.000000] Linux version 3.0.0-05046-ge08dc13-dirty (konrad@phenom) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP PREEMPT Tue Jul 26 16:54:34 EDT 2011\r +(early) [ 0.000000] Command line: console=hvc0 debug earlyprintk=xenboot test=test\r +(early) [ 0.000000] ACPI in unprivileged domain disabled\r +(early) [ 0.000000] released 0 pages of unused memory\r +(early) [ 0.000000] Set 0 page(s) to 1-1 mapping.\r +(early) [ 0.000000] BIOS-provided physical RAM map:\r +(early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)\r +(early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)\r +(early) [ 0.000000] Xen: 0000000000100000 - 0000000080800000 (usable)\r +(early) [ 0.000000] bootconsole [xenboot0] enabled\r +(early) [ 0.000000] NX (Execute Disable) protection: active\r +(early) [ 0.000000] DMI not present or invalid.\r +(early) [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (early) (usable)(early) ==> (early) (reserved)(early) \r +(early) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (early) (usable)(early) \r +(early) [ 0.000000] No AGP bridge found\r +(early) [ 0.000000] last_pfn = 0x80800 max_arch_pfn = 0x400000000\r +(early) [ 0.000000] initial memory mapped : 0 - 1028f000\r +(early) [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480\r +(early) [ 0.000000] init_memory_mapping: 0000000000000000-0000000080800000\r +(early) [ 0.000000] 0000000000 - 0080800000 page 4k\r +(early) [ 0.000000] kernel direct mapping tables up to 80800000 @ 7fbf8000-80000000\r +(early) [ 0.000000] xen: setting RW the range 7ff76000 - 80000000\r +(early) [ 0.000000] RAMDISK: 01b76000 - 1028f000\r +(early) [ 0.000000] No NUMA configuration found\r +(early) [ 0.000000] Faking a node at 0000000000000000-0000000080800000\r +(early) [ 0.000000] Initmem setup node 0 0000000000000000-0000000080800000\r +(early) [ 0.000000] NODE_DATA [000000007fffb000 - 000000007fffffff]\r +(early) [ 0.000000] Zone PFN ranges:\r +(early) [ 0.000000] DMA (early) 0x00000010 -> 0x00001000\r +(early) [ 0.000000] DMA32 (early) 0x00001000 -> 0x00100000\r +(early) [ 0.000000] Normal (early) empty\r +(early) [ 0.000000] Movable zone start PFN for each node\r +(early) [ 0.000000] early_node_map[2] active PFN ranges\r +(early) [ 0.000000] 0: 0x00000010 -> 0x000000a0\r +(early) [ 0.000000] 0: 0x00000100 -> 0x00080800\r +(early) [ 0.000000] On node 0 totalpages: 526224\r +(early) [ 0.000000] DMA zone: 56 pages used for memmap\r +(early) [ 0.000000] DMA zone: 5 pages reserved\r +(early) [ 0.000000] DMA zone: 3923 pages, LIFO batch:0\r +(early) [ 0.000000] DMA32 zone: 7140 pages used for memmap\r +(early) [ 0.000000] DMA32 zone: 515100 pages, LIFO batch:31\r +(early) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs\r +(early) [ 0.000000] No local APIC present\r +(early) [ 0.000000] APIC: disable apic facility\r +(early) [ 0.000000] APIC: switched to apic NOOP\r +(early) [ 0.000000] nr_irqs_gsi: 16\r +(early) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000\r +(early) [ 0.000000] Allocating PCI resources starting at 80800000 (gap: 80800000:7f800000)\r +(early) [ 0.000000] Booting paravirtualized kernel on Xen\r +(early) [ 0.000000] Xen version: 4.2-unstable (preserve-AD)\r +(early) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1\r +(early) [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fb88000 s82048 r8192 d24448 u114688\r +(early) [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u114688 alloc=28*4096(early) \r +(early) [ 0.000000] pcpu-alloc: (early) [0] (early) 0 (early) [0] (early) 1 (early) [0] (early) 2 (early) [0] (early) 3 (early) \r +(early) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 519023\r +(early) [ 0.000000] Policy zone: DMA32\r +(early) [ 0.000000] Kernel command line: console=hvc0 debug earlyprintk=xenboot test=test\r +(early) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)\r +(early) [ 0.000000] Checking aperture...\r +(early) [ 0.000000] No AGP bridge found\r +(early) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area\r +(early) [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!\r +(early) [ 0.000000] Memory: 1810140k/2105344k available (5942k kernel code, 448k absent, 294756k reserved, 2808k data, 692k init)\r +(early) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1\r +(early) [ 0.000000] Preemptible hierarchical RCU implementation.\r +(early) [ 0.000000] NR_IRQS:16640 nr_irqs:304 16\r +(early) [ 0.000000] Console: colour dummy device 80x25\r +(early) [ 0.000000] console [tty0] enabled\r +[ 0.000000] console [hvc0] enabled, bootconsole disabled\r +(early) [ 0.000000] console [hvc0] enabled, bootconsole disabled\r +[ 0.000000] Xen: using vcpuop timer interface\r +[ 0.000000] installing Xen timer for CPU 0\r +[ 0.000000] Detected 3000.212 MHz processor.\r +[ 0.000000] Marking TSC unstable due to TSCs unsynchronized\r +[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.42 BogoMIPS (lpj=3000212)\r +[ 0.000999] pid_max: default: 32768 minimum: 301\r +[ 0.000999] Security Framework initialized\r +[ 0.000999] SELinux: Initializing.\r +[ 0.000999] SELinux: Starting in permissive mode\r +[ 0.000999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)\r +[ 0.001199] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)\r +[ 0.001446] Mount-cache hash table entries: 256\r +[ 0.001596] Initializing cgroup subsys cpuacct\r +[ 0.001604] Initializing cgroup subsys freezer\r +[ 0.001642] tseg: 0000000000\r +[ 0.001653] CPU: Physical Processor ID: 0\r +[ 0.001657] CPU: Processor Core ID: 1\r +[ 0.001707] SMP alternatives: switching to UP code\r +[ 0.002069] cpu 0 spinlock event irq 17\r +[ 0.002115] Performance Events: \r +[ 0.002119] no APIC, boot with the "lapic" boot parameter to force-enable it.\r +[ 0.002125] no hardware sampling interrupt available.\r +[ 0.002147] Broken PMU hardware detected, using software events only.\r +[ 0.008049] MCE: In-kernel MCE decoding enabled.\r +[ 0.008074] NMI watchdog disabled (cpu0): hardware events not enabled\r +[ 0.014060] installing Xen timer for CPU 1\r +[ 0.014117] cpu 1 spinlock event irq 23\r +[ 0.014194] SMP alternatives: switching to SMP code\r +[ 0.015186] NMI watchdog disabled (cpu1): hardware events not enabled\r +[ 0.021063] installing Xen timer for CPU 2\r +[ 0.021118] cpu 2 spinlock event irq 29\r +[ 0.021368] NMI watchdog disabled (cpu2): hardware events not enabled\r +[ 0.027068] installing Xen timer for CPU 3\r +[ 0.027120] cpu 3 spinlock event irq 35\r +[ 0.027357] NMI watchdog disabled (cpu3): hardware events not enabled\r +[ 0.029063] Brought up 4 CPUs\r +[ 0.029307] kworker/u:0 used greatest stack depth: 5496 bytes left\r +[ 0.029307] Grant table initialized\r +[ 0.048886] RTC time: 165:165:165, date: 165/165/65\r +[ 0.048951] NET: Registered protocol family 16\r +[ 0.049047] Extended Config Space enabled on 0 nodes\r +[ 0.050350] PCI: setting up Xen PCI frontend stub\r +[ 0.050358] PCI: pci_cache_line_size set to 64 bytes\r +[ 0.059241] bio: create slab <bio-0> at 0\r +[ 0.060017] ACPI: Interpreter disabled.\r +[ 0.060036] xen/balloon: Initialising balloon driver.\r +[ 0.060036] last_pfn = 0x80800 max_arch_pfn = 0x400000000\r +[ 0.062260] xen-balloon: Initialising balloon driver.\r +[ 0.063073] vgaarb: loaded\r +[ 0.063073] usbcore: registered new interface driver usbfs\r +[ 0.063073] usbcore: registered new interface driver hub\r +[ 0.063073] usbcore: registered new device driver usb\r +[ 0.064030] PCI: System does not support PCI\r +[ 0.064030] PCI: System does not support PCI\r +[ 0.064053] NetLabel: Initializing\r +[ 0.064053] NetLabel: domain hash size = 128\r +[ 0.064053] NetLabel: protocols = UNLABELED CIPSOv4\r +[ 0.064053] NetLabel: unlabeled traffic allowed by default\r +[ 0.064076] Switching to clocksource xen\r +[ 0.064076] Switched to NOHz mode on CPU #3\r +[ 0.064414] Switched to NOHz mode on CPU #0\r +[ 0.064996] Switched to NOHz mode on CPU #2\r +[ 0.065113] Switched to NOHz mode on CPU #1\r +[ 0.066290] pnp: PnP ACPI: disabled\r +[ 0.071025] PCI: max bus depth: 0 pci_try_num: 1\r +[ 0.071084] NET: Registered protocol family 2\r +[ 0.071274] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)\r +[ 0.072620] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)\r +[ 0.073896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)\r +[ 0.074185] TCP: Hash tables configured (established 262144 bind 65536)\r +[ 0.074194] TCP reno registered\r +[ 0.074215] UDP hash table entries: 1024 (order: 3, 32768 bytes)\r +[ 0.074239] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)\r +[ 0.074332] NET: Registered protocol family 1\r +[ 0.074583] RPC: Registered named UNIX socket transport module.\r +[ 0.074592] RPC: Registered udp transport module.\r +[ 0.074597] RPC: Registered tcp transport module.\r +[ 0.074601] RPC: Registered tcp NFSv4.1 backchannel transport module.\r +[ 0.074609] PCI: CLS 0 bytes, default 64\r +[ 0.074726] Trying to unpack rootfs image as initramfs...\r +[ 0.316784] Freeing initrd memory: 236644k freed\r +[ 0.377411] platform rtc_cmos: registered platform RTC device (no PNP device found)\r +[ 0.378778] Machine check injector initialized\r +[ 0.379554] microcode: CPU0: patch_level=0x010000bf\r +[ 0.379574] microcode: CPU1: patch_level=0x010000bf\r +[ 0.379621] microcode: CPU2: patch_level=0x010000bf\r +[ 0.379671] microcode: CPU3: patch_level=0x010000bf\r +[ 0.379748] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba\r +[ 0.380129] audit: initializing netlink socket (disabled)\r +[ 0.380147] type=2000 audit(1311714191.306:1): initialized\r +[ 0.394045] HugeTLB registered 2 MB page size, pre-allocated 0 pages\r +[ 0.399695] VFS: Disk quotas dquot_6.5.2\r +[ 0.399844] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)\r +[ 0.400589] NTFS driver 2.1.30 [Flags: R/W].\r +[ 0.400895] msgmni has been set to 3997\r +[ 0.401041] SELinux: Registering netfilter hooks\r +[ 0.401781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)\r +[ 0.401790] io scheduler noop registered\r +[ 0.401794] io scheduler deadline registered\r +[ 0.401908] io scheduler cfq registered (default)\r +[ 0.402285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5\r +[ 0.450645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled\r +[ 0.514817] Non-volatile memory driver v1.3\r +[ 0.514826] Linux agpgart interface v0.103\r +[ 0.515298] [drm] Initialized drm 1.1.0 20060810\r +[ 0.518170] brd: module loaded\r +[ 0.519592] loop: module loaded\r +[ 0.520265] Fixed MDIO Bus: probed\r +[ 0.520797] tun: Universal TUN/TAP device driver, 1.6\r +[ 0.520804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>\r +[ 0.521202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\r +[ 0.521211] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96\r +[ 0.521303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver\r +[ 0.521310] ohci_hcd: block sizes: ed 80 td 96\r +[ 0.521400] uhci_hcd: USB Universal Host Controller Interface driver\r +[ 0.521570] usbcore: registered new interface driver usblp\r +[ 0.521649] usbcore: registered new interface driver libusual\r +[ 0.521944] i8042: PNP: No PS/2 controller found. Probing ports directly.\r +[ 0.522766] i8042: No controller found\r +[ 0.523049] mousedev: PS/2 mouse device common for all mice\r +[ 0.563573] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0\r +[ 0.563697] rtc_cmos: probe of rtc_cmos failed with error -38\r +[ 0.564012] cpuidle: using governor ladder\r +[ 0.564018] cpuidle: using governor menu\r +[ 0.564023] EFI Variables Facility v0.08 2004-May-17\r +[ 0.564118] zram: num_devices not specified. Using default: 1\r +[ 0.564125] zram: Creating 1 devices ...\r +[ 0.564504] Netfilter messages via NETLINK v0.30.\r +[ 0.564525] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)\r +[ 0.564828] ctnetlink v0.93: registering with nfnetlink.\r +[ 0.565311] ip_tables: (C) 2000-2006 Netfilter Core Team\r +[ 0.565346] TCP cubic registered\r +[ 0.565351] Initializing XFRM netlink socket\r +[ 0.565760] NET: Registered protocol family 10\r +[ 0.566372] ip6_tables: (C) 2000-2006 Netfilter Core Team\r +[ 0.566433] IPv6 over IPv4 tunneling driver\r +[ 0.567372] NET: Registered protocol family 17\r +[ 0.567408] Registering the dns_resolver key type\r +[ 0.567985] PM: Hibernation image not present or could not be loaded.\r +[ 0.568005] registered taskstats version 1\r +[ 0.568041] XENBUS: Device with no driver: device/vif/0\r +[ 0.568046] XENBUS: Device with no driver: device/vfb/0\r +[ 0.568052] XENBUS: Device with no driver: device/vkbd/0\r +[ 0.568065] Magic number: 1:252:3141\r +[ 0.568211] powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (4 cpu cores) (version 2.20.00)\r +[ 0.568237] powernow-k8: Core Performance Boosting: on.\r +[ 0.568253] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.\r +[ 0.568254] [Firmware Bug]: powernow-k8: Try again with latest BIOS.\r +[ 0.568769] Freeing unused kernel memory: 692k freed\r +[ 0.568966] Write protecting the kernel read-only data: 8192k\r +[ 0.572048] Freeing unused kernel memory: 180k freed\r +[ 0.572251] Freeing unused kernel memory: 328k freed\r +\rinit started: BusyBox v1.14.3 (2011-07-26 16:55:54 EDT)\r +[ 0.579282] consoletype used greatest stack depth: 5376 bytes left\r +Mounting directories [ OK ]\r\r +[ 0.799316] modprobe used greatest stack depth: 5136 bytes left\r +mount: mount point /sys/kernel/config does not exist\r +[ 0.806063] core_filesystem used greatest stack depth: 5024 bytes left\r +[ 0.818750] input: Xen Virtual Keyboard as /devices/virtual/input/input0\r +[ 0.819044] input: Xen Virtual Pointer as /devices/virtual/input/input1\r +[ 1.041570] Initialising Xen virtual ethernet driver.\r +[ 1.158627] ------------[ cut here ]------------\r +[ 1.158669] WARNING: at /home/konrad/ssd/linux/fs/proc/base.c:1123 oom_adjust_write+0x294/0x2b0()\r +[ 1.158677] udevd (1192): /proc/1192/oom_adj is deprecated, please use /proc/1192/oom_score_adj instead.\r +[ 1.158685] Modules linked in: xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs\r +[ 1.158711] Pid: 1192, comm: udevd Not tainted 3.0.0-05046-ge08dc13-dirty #1\r +[ 1.158717] Call Trace:\r +[ 1.158725] [<ffffffff810921da>] warn_slowpath_common+0x7a/0xb0\r +[ 1.158733] [<ffffffff810922b1>] warn_slowpath_fmt+0x41/0x50\r +[ 1.158740] [<ffffffff8109de85>] ? ns_capable+0x25/0x60\r +[ 1.158747] [<ffffffff811d4d44>] oom_adjust_write+0x294/0x2b0\r +[ 1.158755] [<ffffffff81175698>] vfs_write+0xc8/0x190\r +[ 1.158761] [<ffffffff8117584c>] sys_write+0x4c/0x90\r +[ 1.158769] [<ffffffff815c8512>] system_call_fastpath+0x16/0x1b\r +[ 1.158775] ---[ end trace 53a836e564b32553 ]---\r +[ 1.289040] ip used greatest stack depth: 3936 bytes left\r +Waiting for devices [ OK ]\r\r +Waiting for fb [ OK ]\r\r +Starting..[/dev/fb0]\r +/dev/fb0: len:0\r +/dev/fb0: bits/pixel32\r +(7fdbfe873000): Writting .. [800:600]\r +Done!\r +FATAL: Module agpgart_intel not found.\r +[ 1.420253] Console: switching to colour frame buffer device 100x37\r +[ 1.462964] [drm] radeon kernel modesetting enabled.\r +WARNING: Error inserting wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/wmi.ko): No such device\r +WARNING: Error inserting mxm_wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/mxm-wmi.ko): No such device\r +WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device\r +WARNING: Error inserting ttm (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device\r +FATAL: Error inserting nouveau (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device\r +WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device\r +FATAL: Error inserting i915 (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device\r +Starting..[/dev/fb0]\r +/dev/fb0: len:0\r +/dev/fb0: bits/pixel32\r +(7fecfee0e000): Writting .. [800:600]\r +Done!\r +VGA: 0000:\r +Waiting for network [ OK ]\r\r +Bringing up loopback interface: [ OK ]\r\r +Bringing up interface eth0: [ 1.785668] device eth0 entered promiscuous mode\r +[ OK ]\r\r +Bringing up interface switch: \r +Determining IP information for switch...[ 1.843220] switch: port 1(eth0) entering forwarding state\r +[ 1.843271] switch: port 1(eth0) entering forwarding state\r + done.\r +[ OK ]\r\r +Waiting for init.custom [ OK ]\r\r +Start sshd\r +PING master.dumpdata.com (192.168.101.1) 56(84) bytes of data.\r +\r +--- master.dumpdata.com ping statistics ---\r +1 packets transmitted, 1 received, 0% packet loss, time 1ms\r +rtt min/avg/max/mdev = 0.365/0.365/0.365/0.000 ms\r +mount.nfs: rpc.statd is not running but is required for remote locking.\r +mount.nfs: Either use '-o nolock' to keep locks local, or start statd.\r +mount.nfs: an incorrect mount option was specified\r +\r +Starting SSHd ...\r +[ 3.190254] mount.nfs used greatest stack depth: 3648 bytes left\r +[ 3.193509] [drm] Module unloaded\r +ERROR: Module nouveau does not exist in /proc/modules\r +libxl: error: libxl.c:61:libxl_ctx_alloc: Is xenstore daemon running?\r +failed to stat /var/run/xenstored.pid: No such file or directory\r +cannot init xl context\r +Waiting for SSHd [ OK ]\r\r +WARNING: ssh currently running [2319] ignoring start request\r +[ 3.359346] SCSI subsystem initialized\r +[ 3.361222] Loading iSCSI transport class v2.0-870.\r +[ 3.364431] iscsi: registered transport (tcp)\r +iscsistart: transport class version 2.0-870. iscsid version 2.0-872\r +Could not get list of targets from firmware.\r +Jul 26 21:03:14 g-pvops syslogd 1.5.0: restart.\r\r +FATAL: Module evtchn not found.\r +[ 3.400467] Event-channel device installed.\r +xencommons should be started first.\r + CPU0 CPU1 CPU2 CPU3 \r + 16: 1720 0 0 0 xen-percpu-virq timer0\r + 17: 8 0 0 0 xen-percpu-ipi spinlock0\r + 18: 2432 0 0 0 xen-percpu-ipi resched0\r + 19: 162 0 0 0 xen-percpu-ipi callfunc0\r + 20: 0 0 0 0 xen-percpu-virq debug0\r + 21: 105 0 0 0 xen-percpu-ipi callfuncsingle0\r + 22: 0 1724 0 0 xen-percpu-virq timer1\r + 23: 0 11 0 0 xen-percpu-ipi spinlock1\r + 24: 0 2050 0 0 xen-percpu-ipi resched1\r + 25: 0 139 0 0 xen-percpu-ipi callfunc1\r + 26: 0 0 0 0 xen-percpu-virq debug1\r + 27: 0 84 0 0 xen-percpu-ipi callfuncsingle1\r + 28: 0 0 1345 0 xen-percpu-virq timer2\r + 29: 0 0 23 0 xen-percpu-ipi spinlock2\r + 30: 0 0 671 0 xen-percpu-ipi resched2\r + 31: 0 0 161 0 xen-percpu-ipi callfunc2\r + 32: 0 0 0 0 xen-percpu-virq debug2\r + 33: 0 0 101 0 xen-percpu-ipi callfuncsingle2\r + 34: 0 0 0 1684 xen-percpu-virq timer3\r + 35: 0 0 0 15 xen-percpu-ipi spinlock3\r + 36: 0 0 0 1437 xen-percpu-ipi resched3\r + 37: 0 0 0 156 xen-percpu-ipi callfunc3\r + 38: 0 0 0 0 xen-percpu-virq debug3\r + 39: 0 0 0 118 xen-percpu-ipi callfuncsingle3\r + 40: 404 0 0 0 xen-dyn-event xenbus\r + 41: 71 0 0 0 xen-dyn-event hvc_console\r + 42: 0 0 0 0 xen-dyn-event vkbd\r + 43: 70 0 0 0 xen-dyn-event vfb\r + 44: 107 0 0 0 xen-dyn-event eth0\r +NMI: 0 0 0 0 Non-maskable interrupts\r +LOC: 0 0 0 0 Local timer interrupts\r +SPU: 0 0 0 0 Spurious interrupts\r +PMI: 0 0 0 0 Performance monitoring interrupts\r +IWI: 0 0 0 0 IRQ work interrupts\r +RES: 2432 2050 671 1437 Rescheduling interrupts\r +CAL: 267 223 262 274 Function call interrupts\r +TLB: 0 0 0 0 TLB shootdowns\r +TRM: 0 0 0 0 Thermal event interrupts\r +THR: 0 0 0 0 Threshold APIC interrupts\r +MCE: 0 0 0 0 Machine check exceptions\r +MCP: 0 0 0 0 Machine check polls\r +ERR: 0\r +MIS: 0\r +00000000-0000ffff : reserved\r +00010000-0009ffff : System RAM\r +000a0000-000fffff : reserved\r + 000f0000-000fffff : System ROM\r +00100000-807fffff : System RAM\r + 01000000-015cd9bb : Kernel code\r + 015cd9bc-0188bbff : Kernel data\r + 01941000-01a3ffff : Kernel bss\r +Starting test testcase..\r +Jul 26 21:03:14 g-pvops init: starting pid 2436, tty '/dev/tty0': '/bin/sh'\r\r +Jul 26 21:03:14 g-pvops init: starting pid 2437, tty '/dev/tty1': '/bin/sh'\r\r +Jul 26 21:03:14 g-pvops init: starting pid 2438, tty '/dev/ttyS0': '/bin/sh'\r\r +\r + ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.9 |~~~~~~~~~~~~~~~~~~~~~~~~~~\r + (c) 2001-2010 The world wide DirectFB Open Source Community\r + (c) 2000-2004 Convergence (integrated media) GmbH\r + ----------------------------------------------------------------\r +\r +(*) DirectFB/Core: Single Application Core. (2011-07-26 20:56) \r +Jul 26 21:03:14 g-pvops init: starting pid 2439, tty '/dev/hvc0': '/bin/sh'\r\r +(*) Direct/Memcpy: Using libc memcpy()\r +sh-4.1# (*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>...\r +(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...\r +(*) DirectFB/FBDev: Found 'xen' (ID 0) with frame buffer at 0x00000000, 2048k (MMIO 0x00000000, 0k)\r +(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r +(*) DirectFB/Input: Keyboard 0.9 (directfb.org)\r +(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r +(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)\r +(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r +(*) DirectFB/Input: Xen Virtual Keyboard (1) 0.1 (directfb.org)\r +(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r +(*) DirectFB/Input: Xen Virtual Pointer (2) 0.1 (directfb.org)\r +(*) Direct/Thread: Started 'Hotplug with Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r +(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver \r +(*) DirectFB/Genefx: MMX detected and enabled\r +(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)\r +(*) DirectFB/Core/WM: Default 0.3 (directfb.org)\r +(*) FBDev/Mode: Setting 800x600 RGB32\r +(*) FBDev/Mode: Switched to 800x600 (virtual 800x600) at 32 bit (RGB32), pitch 3200\r +\r + SSH started [2319]\r +\r +\r +Jul 26 21:03:15 g-pvops iscsid: transport class version 2.0-870. iscsid version 2.0-872\r\r +Jul 26 21:03:15 g-pvops iscsid: iSCSI daemon with pid=2400 started!\r\r +Jul 26 21:03:15 g-pvops init: process '/bin/sh' (pid 2438) exited. Scheduling for restart.\r\r +Jul 26 21:03:15 g-pvops init: starting pid 2452, tty '/dev/ttyS0': '/bin/sh'\r\r +Jul 26 21:03:16 g-pvops init: process '/bin/sh' (pid 2452) exited. Scheduling for restart.\r\r +Jul 26 21:03:16 g-pvops init: starting pid 2453, tty '/dev/ttyS0': '/bin/sh'\r\r +Jul 26 21:03:17 g-pvops init: process '/bin/sh' (pid 2453) exited. Scheduling for restart.\r\r +Jul 26 21:03:17 g-pvops init: starting pid 2454, tty '/dev/ttyS0': '/bin/sh'\r\r +Jul 26 21:03:18 g-pvops init: process '/bin/sh' (pid 2454) exited. Scheduling for restart.\r\r +Jul 26 21:03:18 g-pvops init: starting pid 2455, tty '/dev/ttyS0': '/bin/sh'\r\r +poweroJul 26 21:03:19 g-pvops init: process '/bin/sh' (pid 2455) exited. Scheduling for restart.\r\r +Jul 26 21:03:19 g-pvops init: starting pid 2457, tty '/dev/ttyS0': '/bin/sh'\r\r +ff\r +Jul 26 21:03:19 g-pvops init: starting pid 2460, tty '': '/etc/init.d/halt'\r\r +sh-4.1# Usage: /etc/init.d/halt {start}\r +\rThe system is going down NOW!\r +Jul 26 21:03:19Jul 26 21:03:19 g-pvops \rSent SIGTERM to all processes\r +(!) [ 2435: 0.000] --> Caught signal 15 (sent by pid 1, uid 0) <--\r + (!!!) *** WARNING [still objects in 'Window Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r + (!!!) *** WARNING [still objects in 'Layer Region Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r + (!!!) *** WARNING [still objects in 'Layer Context Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r + (!!!) *** WARNING [still objects in 'Surface Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r +\rSent SIGKILL to all processes\r +\rRequesting system poweroff\r +[ 10.925177] System halted.\r Parsing config file /root/pv.xm Daemon running with PID 18759 diff --git a/a/content_digest b/N1/content_digest index 309b8f0..ea20a07 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -9,22 +9,22 @@ "Subject\0Re: git commit 9fd67b4ed0714ab718f1f9bd14c344af336a6df7 (x86-64: Give vvars their own page) breaks Xen PV guests (64-bit).\0" "Date\0Tue, 26 Jul 2011 17:06:05 -0400\0" "To\0Andrew Lutomirski <luto@mit.edu>\0" - "Cc\0jj@chaosbits.net" - linux-kernel@vger.kernel.org + "Cc\0Jeremy Fitzhardinge <jeremy@goop.org>" xen-devel@lists.xensource.com - arjan@infradead.org - JBeulich@novell.com - richard.weinberger@gmail.com - mikpe@it.uu.se andi@firstfloor.org + Stefano Stabellini <stefano.stabellini@eu.citrix.com> + richard.weinberger@gmail.com brgerst@gmail.com + linux-kernel@vger.kernel.org + JBeulich@novell.com + Ian Campbell <Ian.Campbell@eu.citrix.com> Louis.Rilling@kerlabs.com + jj@chaosbits.net + mikpe@it.uu.se Valdis.Kletnieks@vt.edu - pageexec@freemail.hu mingo@elte.hu - Jeremy Fitzhardinge <jeremy@goop.org> - Stefano Stabellini <stefano.stabellini@eu.citrix.com> - " Ian Campbell <Ian.Campbell@eu.citrix.com>\0" + pageexec@freemail.hu + " arjan@infradead.org\0" "\00:1\0" "b\0" "On Tue, Jul 26, 2011 at 04:55:57PM -0400, Andrew Lutomirski wrote:\n" @@ -108,428 +108,428 @@ "It boots up fine:\n" "\n" "\n" - "(early) [ 0.000000] Initializing cgroup subsys cpuset\n" - "(early) [ 0.000000] Initializing cgroup subsys cpu\n" - "(early) [ 0.000000] Linux version 3.0.0-05046-ge08dc13-dirty (konrad@phenom) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP PREEMPT Tue Jul 26 16:54:34 EDT 2011\n" - "(early) [ 0.000000] Command line: console=hvc0 debug earlyprintk=xenboot test=test\n" - "(early) [ 0.000000] ACPI in unprivileged domain disabled\n" - "(early) [ 0.000000] released 0 pages of unused memory\n" - "(early) [ 0.000000] Set 0 page(s) to 1-1 mapping.\n" - "(early) [ 0.000000] BIOS-provided physical RAM map:\n" - "(early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)\n" - "(early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)\n" - "(early) [ 0.000000] Xen: 0000000000100000 - 0000000080800000 (usable)\n" - "(early) [ 0.000000] bootconsole [xenboot0] enabled\n" - "(early) [ 0.000000] NX (Execute Disable) protection: active\n" - "(early) [ 0.000000] DMI not present or invalid.\n" - "(early) [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (early) (usable)(early) ==> (early) (reserved)(early) \n" - "(early) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (early) (usable)(early) \n" - "(early) [ 0.000000] No AGP bridge found\n" - "(early) [ 0.000000] last_pfn = 0x80800 max_arch_pfn = 0x400000000\n" - "(early) [ 0.000000] initial memory mapped : 0 - 1028f000\n" - "(early) [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480\n" - "(early) [ 0.000000] init_memory_mapping: 0000000000000000-0000000080800000\n" - "(early) [ 0.000000] 0000000000 - 0080800000 page 4k\n" - "(early) [ 0.000000] kernel direct mapping tables up to 80800000 @ 7fbf8000-80000000\n" - "(early) [ 0.000000] xen: setting RW the range 7ff76000 - 80000000\n" - "(early) [ 0.000000] RAMDISK: 01b76000 - 1028f000\n" - "(early) [ 0.000000] No NUMA configuration found\n" - "(early) [ 0.000000] Faking a node at 0000000000000000-0000000080800000\n" - "(early) [ 0.000000] Initmem setup node 0 0000000000000000-0000000080800000\n" - "(early) [ 0.000000] NODE_DATA [000000007fffb000 - 000000007fffffff]\n" - "(early) [ 0.000000] Zone PFN ranges:\n" - "(early) [ 0.000000] DMA (early) 0x00000010 -> 0x00001000\n" - "(early) [ 0.000000] DMA32 (early) 0x00001000 -> 0x00100000\n" - "(early) [ 0.000000] Normal (early) empty\n" - "(early) [ 0.000000] Movable zone start PFN for each node\n" - "(early) [ 0.000000] early_node_map[2] active PFN ranges\n" - "(early) [ 0.000000] 0: 0x00000010 -> 0x000000a0\n" - "(early) [ 0.000000] 0: 0x00000100 -> 0x00080800\n" - "(early) [ 0.000000] On node 0 totalpages: 526224\n" - "(early) [ 0.000000] DMA zone: 56 pages used for memmap\n" - "(early) [ 0.000000] DMA zone: 5 pages reserved\n" - "(early) [ 0.000000] DMA zone: 3923 pages, LIFO batch:0\n" - "(early) [ 0.000000] DMA32 zone: 7140 pages used for memmap\n" - "(early) [ 0.000000] DMA32 zone: 515100 pages, LIFO batch:31\n" - "(early) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs\n" - "(early) [ 0.000000] No local APIC present\n" - "(early) [ 0.000000] APIC: disable apic facility\n" - "(early) [ 0.000000] APIC: switched to apic NOOP\n" - "(early) [ 0.000000] nr_irqs_gsi: 16\n" - "(early) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000\n" - "(early) [ 0.000000] Allocating PCI resources starting at 80800000 (gap: 80800000:7f800000)\n" - "(early) [ 0.000000] Booting paravirtualized kernel on Xen\n" - "(early) [ 0.000000] Xen version: 4.2-unstable (preserve-AD)\n" - "(early) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1\n" - "(early) [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fb88000 s82048 r8192 d24448 u114688\n" - "(early) [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u114688 alloc=28*4096(early) \n" - "(early) [ 0.000000] pcpu-alloc: (early) [0] (early) 0 (early) [0] (early) 1 (early) [0] (early) 2 (early) [0] (early) 3 (early) \n" - "(early) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 519023\n" - "(early) [ 0.000000] Policy zone: DMA32\n" - "(early) [ 0.000000] Kernel command line: console=hvc0 debug earlyprintk=xenboot test=test\n" - "(early) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)\n" - "(early) [ 0.000000] Checking aperture...\n" - "(early) [ 0.000000] No AGP bridge found\n" - "(early) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area\n" - "(early) [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!\n" - "(early) [ 0.000000] Memory: 1810140k/2105344k available (5942k kernel code, 448k absent, 294756k reserved, 2808k data, 692k init)\n" - "(early) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1\n" - "(early) [ 0.000000] Preemptible hierarchical RCU implementation.\n" - "(early) [ 0.000000] NR_IRQS:16640 nr_irqs:304 16\n" - "(early) [ 0.000000] Console: colour dummy device 80x25\n" - "(early) [ 0.000000] console [tty0] enabled\n" - "[ 0.000000] console [hvc0] enabled, bootconsole disabled\n" - "(early) [ 0.000000] console [hvc0] enabled, bootconsole disabled\n" - "[ 0.000000] Xen: using vcpuop timer interface\n" - "[ 0.000000] installing Xen timer for CPU 0\n" - "[ 0.000000] Detected 3000.212 MHz processor.\n" - "[ 0.000000] Marking TSC unstable due to TSCs unsynchronized\n" - "[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.42 BogoMIPS (lpj=3000212)\n" - "[ 0.000999] pid_max: default: 32768 minimum: 301\n" - "[ 0.000999] Security Framework initialized\n" - "[ 0.000999] SELinux: Initializing.\n" - "[ 0.000999] SELinux: Starting in permissive mode\n" - "[ 0.000999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)\n" - "[ 0.001199] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)\n" - "[ 0.001446] Mount-cache hash table entries: 256\n" - "[ 0.001596] Initializing cgroup subsys cpuacct\n" - "[ 0.001604] Initializing cgroup subsys freezer\n" - "[ 0.001642] tseg: 0000000000\n" - "[ 0.001653] CPU: Physical Processor ID: 0\n" - "[ 0.001657] CPU: Processor Core ID: 1\n" - "[ 0.001707] SMP alternatives: switching to UP code\n" - "[ 0.002069] cpu 0 spinlock event irq 17\n" - "[ 0.002115] Performance Events: \n" - "[ 0.002119] no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n" - "[ 0.002125] no hardware sampling interrupt available.\n" - "[ 0.002147] Broken PMU hardware detected, using software events only.\n" - "[ 0.008049] MCE: In-kernel MCE decoding enabled.\n" - "[ 0.008074] NMI watchdog disabled (cpu0): hardware events not enabled\n" - "[ 0.014060] installing Xen timer for CPU 1\n" - "[ 0.014117] cpu 1 spinlock event irq 23\n" - "[ 0.014194] SMP alternatives: switching to SMP code\n" - "[ 0.015186] NMI watchdog disabled (cpu1): hardware events not enabled\n" - "[ 0.021063] installing Xen timer for CPU 2\n" - "[ 0.021118] cpu 2 spinlock event irq 29\n" - "[ 0.021368] NMI watchdog disabled (cpu2): hardware events not enabled\n" - "[ 0.027068] installing Xen timer for CPU 3\n" - "[ 0.027120] cpu 3 spinlock event irq 35\n" - "[ 0.027357] NMI watchdog disabled (cpu3): hardware events not enabled\n" - "[ 0.029063] Brought up 4 CPUs\n" - "[ 0.029307] kworker/u:0 used greatest stack depth: 5496 bytes left\n" - "[ 0.029307] Grant table initialized\n" - "[ 0.048886] RTC time: 165:165:165, date: 165/165/65\n" - "[ 0.048951] NET: Registered protocol family 16\n" - "[ 0.049047] Extended Config Space enabled on 0 nodes\n" - "[ 0.050350] PCI: setting up Xen PCI frontend stub\n" - "[ 0.050358] PCI: pci_cache_line_size set to 64 bytes\n" - "[ 0.059241] bio: create slab <bio-0> at 0\n" - "[ 0.060017] ACPI: Interpreter disabled.\n" - "[ 0.060036] xen/balloon: Initialising balloon driver.\n" - "[ 0.060036] last_pfn = 0x80800 max_arch_pfn = 0x400000000\n" - "[ 0.062260] xen-balloon: Initialising balloon driver.\n" - "[ 0.063073] vgaarb: loaded\n" - "[ 0.063073] usbcore: registered new interface driver usbfs\n" - "[ 0.063073] usbcore: registered new interface driver hub\n" - "[ 0.063073] usbcore: registered new device driver usb\n" - "[ 0.064030] PCI: System does not support PCI\n" - "[ 0.064030] PCI: System does not support PCI\n" - "[ 0.064053] NetLabel: Initializing\n" - "[ 0.064053] NetLabel: domain hash size = 128\n" - "[ 0.064053] NetLabel: protocols = UNLABELED CIPSOv4\n" - "[ 0.064053] NetLabel: unlabeled traffic allowed by default\n" - "[ 0.064076] Switching to clocksource xen\n" - "[ 0.064076] Switched to NOHz mode on CPU #3\n" - "[ 0.064414] Switched to NOHz mode on CPU #0\n" - "[ 0.064996] Switched to NOHz mode on CPU #2\n" - "[ 0.065113] Switched to NOHz mode on CPU #1\n" - "[ 0.066290] pnp: PnP ACPI: disabled\n" - "[ 0.071025] PCI: max bus depth: 0 pci_try_num: 1\n" - "[ 0.071084] NET: Registered protocol family 2\n" - "[ 0.071274] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)\n" - "[ 0.072620] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)\n" - "[ 0.073896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)\n" - "[ 0.074185] TCP: Hash tables configured (established 262144 bind 65536)\n" - "[ 0.074194] TCP reno registered\n" - "[ 0.074215] UDP hash table entries: 1024 (order: 3, 32768 bytes)\n" - "[ 0.074239] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)\n" - "[ 0.074332] NET: Registered protocol family 1\n" - "[ 0.074583] RPC: Registered named UNIX socket transport module.\n" - "[ 0.074592] RPC: Registered udp transport module.\n" - "[ 0.074597] RPC: Registered tcp transport module.\n" - "[ 0.074601] RPC: Registered tcp NFSv4.1 backchannel transport module.\n" - "[ 0.074609] PCI: CLS 0 bytes, default 64\n" - "[ 0.074726] Trying to unpack rootfs image as initramfs...\n" - "[ 0.316784] Freeing initrd memory: 236644k freed\n" - "[ 0.377411] platform rtc_cmos: registered platform RTC device (no PNP device found)\n" - "[ 0.378778] Machine check injector initialized\n" - "[ 0.379554] microcode: CPU0: patch_level=0x010000bf\n" - "[ 0.379574] microcode: CPU1: patch_level=0x010000bf\n" - "[ 0.379621] microcode: CPU2: patch_level=0x010000bf\n" - "[ 0.379671] microcode: CPU3: patch_level=0x010000bf\n" - "[ 0.379748] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n" - "[ 0.380129] audit: initializing netlink socket (disabled)\n" - "[ 0.380147] type=2000 audit(1311714191.306:1): initialized\n" - "[ 0.394045] HugeTLB registered 2 MB page size, pre-allocated 0 pages\n" - "[ 0.399695] VFS: Disk quotas dquot_6.5.2\n" - "[ 0.399844] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)\n" - "[ 0.400589] NTFS driver 2.1.30 [Flags: R/W].\n" - "[ 0.400895] msgmni has been set to 3997\n" - "[ 0.401041] SELinux: Registering netfilter hooks\n" - "[ 0.401781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)\n" - "[ 0.401790] io scheduler noop registered\n" - "[ 0.401794] io scheduler deadline registered\n" - "[ 0.401908] io scheduler cfq registered (default)\n" - "[ 0.402285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5\n" - "[ 0.450645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled\n" - "[ 0.514817] Non-volatile memory driver v1.3\n" - "[ 0.514826] Linux agpgart interface v0.103\n" - "[ 0.515298] [drm] Initialized drm 1.1.0 20060810\n" - "[ 0.518170] brd: module loaded\n" - "[ 0.519592] loop: module loaded\n" - "[ 0.520265] Fixed MDIO Bus: probed\n" - "[ 0.520797] tun: Universal TUN/TAP device driver, 1.6\n" - "[ 0.520804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>\n" - "[ 0.521202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n" - "[ 0.521211] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96\n" - "[ 0.521303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver\n" - "[ 0.521310] ohci_hcd: block sizes: ed 80 td 96\n" - "[ 0.521400] uhci_hcd: USB Universal Host Controller Interface driver\n" - "[ 0.521570] usbcore: registered new interface driver usblp\n" - "[ 0.521649] usbcore: registered new interface driver libusual\n" - "[ 0.521944] i8042: PNP: No PS/2 controller found. Probing ports directly.\n" - "[ 0.522766] i8042: No controller found\n" - "[ 0.523049] mousedev: PS/2 mouse device common for all mice\n" - "[ 0.563573] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0\n" - "[ 0.563697] rtc_cmos: probe of rtc_cmos failed with error -38\n" - "[ 0.564012] cpuidle: using governor ladder\n" - "[ 0.564018] cpuidle: using governor menu\n" - "[ 0.564023] EFI Variables Facility v0.08 2004-May-17\n" - "[ 0.564118] zram: num_devices not specified. Using default: 1\n" - "[ 0.564125] zram: Creating 1 devices ...\n" - "[ 0.564504] Netfilter messages via NETLINK v0.30.\n" - "[ 0.564525] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)\n" - "[ 0.564828] ctnetlink v0.93: registering with nfnetlink.\n" - "[ 0.565311] ip_tables: (C) 2000-2006 Netfilter Core Team\n" - "[ 0.565346] TCP cubic registered\n" - "[ 0.565351] Initializing XFRM netlink socket\n" - "[ 0.565760] NET: Registered protocol family 10\n" - "[ 0.566372] ip6_tables: (C) 2000-2006 Netfilter Core Team\n" - "[ 0.566433] IPv6 over IPv4 tunneling driver\n" - "[ 0.567372] NET: Registered protocol family 17\n" - "[ 0.567408] Registering the dns_resolver key type\n" - "[ 0.567985] PM: Hibernation image not present or could not be loaded.\n" - "[ 0.568005] registered taskstats version 1\n" - "[ 0.568041] XENBUS: Device with no driver: device/vif/0\n" - "[ 0.568046] XENBUS: Device with no driver: device/vfb/0\n" - "[ 0.568052] XENBUS: Device with no driver: device/vkbd/0\n" - "[ 0.568065] Magic number: 1:252:3141\n" - "[ 0.568211] powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (4 cpu cores) (version 2.20.00)\n" - "[ 0.568237] powernow-k8: Core Performance Boosting: on.\n" - "[ 0.568253] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.\n" - "[ 0.568254] [Firmware Bug]: powernow-k8: Try again with latest BIOS.\n" - "[ 0.568769] Freeing unused kernel memory: 692k freed\n" - "[ 0.568966] Write protecting the kernel read-only data: 8192k\n" - "[ 0.572048] Freeing unused kernel memory: 180k freed\n" - "[ 0.572251] Freeing unused kernel memory: 328k freed\n" - "\rinit started: BusyBox v1.14.3 (2011-07-26 16:55:54 EDT)\n" - "[ 0.579282] consoletype used greatest stack depth: 5376 bytes left\n" - "Mounting directories [ OK ]\r\n" - "[ 0.799316] modprobe used greatest stack depth: 5136 bytes left\n" - "mount: mount point /sys/kernel/config does not exist\n" - "[ 0.806063] core_filesystem used greatest stack depth: 5024 bytes left\n" - "[ 0.818750] input: Xen Virtual Keyboard as /devices/virtual/input/input0\n" - "[ 0.819044] input: Xen Virtual Pointer as /devices/virtual/input/input1\n" - "[ 1.041570] Initialising Xen virtual ethernet driver.\n" - "[ 1.158627] ------------[ cut here ]------------\n" - "[ 1.158669] WARNING: at /home/konrad/ssd/linux/fs/proc/base.c:1123 oom_adjust_write+0x294/0x2b0()\n" - "[ 1.158677] udevd (1192): /proc/1192/oom_adj is deprecated, please use /proc/1192/oom_score_adj instead.\n" - "[ 1.158685] Modules linked in: xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs\n" - "[ 1.158711] Pid: 1192, comm: udevd Not tainted 3.0.0-05046-ge08dc13-dirty #1\n" - "[ 1.158717] Call Trace:\n" - "[ 1.158725] [<ffffffff810921da>] warn_slowpath_common+0x7a/0xb0\n" - "[ 1.158733] [<ffffffff810922b1>] warn_slowpath_fmt+0x41/0x50\n" - "[ 1.158740] [<ffffffff8109de85>] ? ns_capable+0x25/0x60\n" - "[ 1.158747] [<ffffffff811d4d44>] oom_adjust_write+0x294/0x2b0\n" - "[ 1.158755] [<ffffffff81175698>] vfs_write+0xc8/0x190\n" - "[ 1.158761] [<ffffffff8117584c>] sys_write+0x4c/0x90\n" - "[ 1.158769] [<ffffffff815c8512>] system_call_fastpath+0x16/0x1b\n" - "[ 1.158775] ---[ end trace 53a836e564b32553 ]---\n" - "[ 1.289040] ip used greatest stack depth: 3936 bytes left\n" - "Waiting for devices [ OK ]\r\n" - "Waiting for fb [ OK ]\r\n" - "Starting..[/dev/fb0]\n" - "/dev/fb0: len:0\n" - "/dev/fb0: bits/pixel32\n" - "(7fdbfe873000): Writting .. [800:600]\n" - "Done!\n" - "FATAL: Module agpgart_intel not found.\n" - "[ 1.420253] Console: switching to colour frame buffer device 100x37\n" - "[ 1.462964] [drm] radeon kernel modesetting enabled.\n" - "WARNING: Error inserting wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/wmi.ko): No such device\n" - "WARNING: Error inserting mxm_wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/mxm-wmi.ko): No such device\n" - "WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device\n" - "WARNING: Error inserting ttm (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device\n" - "FATAL: Error inserting nouveau (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device\n" - "WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device\n" - "FATAL: Error inserting i915 (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device\n" - "Starting..[/dev/fb0]\n" - "/dev/fb0: len:0\n" - "/dev/fb0: bits/pixel32\n" - "(7fecfee0e000): Writting .. [800:600]\n" - "Done!\n" - "VGA: 0000:\n" - "Waiting for network [ OK ]\r\n" - "Bringing up loopback interface: [ OK ]\r\n" - "Bringing up interface eth0: [ 1.785668] device eth0 entered promiscuous mode\n" - "[ OK ]\r\n" - "Bringing up interface switch: \n" - "Determining IP information for switch...[ 1.843220] switch: port 1(eth0) entering forwarding state\n" - "[ 1.843271] switch: port 1(eth0) entering forwarding state\n" - " done.\n" - "[ OK ]\r\n" - "Waiting for init.custom [ OK ]\r\n" - "Start sshd\n" - "PING master.dumpdata.com (192.168.101.1) 56(84) bytes of data.\n" - "\n" - "--- master.dumpdata.com ping statistics ---\n" - "1 packets transmitted, 1 received, 0% packet loss, time 1ms\n" - "rtt min/avg/max/mdev = 0.365/0.365/0.365/0.000 ms\n" - "mount.nfs: rpc.statd is not running but is required for remote locking.\n" - "mount.nfs: Either use '-o nolock' to keep locks local, or start statd.\n" - "mount.nfs: an incorrect mount option was specified\n" - "\n" - "Starting SSHd ...\n" - "[ 3.190254] mount.nfs used greatest stack depth: 3648 bytes left\n" - "[ 3.193509] [drm] Module unloaded\n" - "ERROR: Module nouveau does not exist in /proc/modules\n" - "libxl: error: libxl.c:61:libxl_ctx_alloc: Is xenstore daemon running?\n" - "failed to stat /var/run/xenstored.pid: No such file or directory\n" - "cannot init xl context\n" - "Waiting for SSHd [ OK ]\r\n" - "WARNING: ssh currently running [2319] ignoring start request\n" - "[ 3.359346] SCSI subsystem initialized\n" - "[ 3.361222] Loading iSCSI transport class v2.0-870.\n" - "[ 3.364431] iscsi: registered transport (tcp)\n" - "iscsistart: transport class version 2.0-870. iscsid version 2.0-872\n" - "Could not get list of targets from firmware.\n" - "Jul 26 21:03:14 g-pvops syslogd 1.5.0: restart.\r\n" - "FATAL: Module evtchn not found.\n" - "[ 3.400467] Event-channel device installed.\n" - "xencommons should be started first.\n" - " CPU0 CPU1 CPU2 CPU3 \n" - " 16: 1720 0 0 0 xen-percpu-virq timer0\n" - " 17: 8 0 0 0 xen-percpu-ipi spinlock0\n" - " 18: 2432 0 0 0 xen-percpu-ipi resched0\n" - " 19: 162 0 0 0 xen-percpu-ipi callfunc0\n" - " 20: 0 0 0 0 xen-percpu-virq debug0\n" - " 21: 105 0 0 0 xen-percpu-ipi callfuncsingle0\n" - " 22: 0 1724 0 0 xen-percpu-virq timer1\n" - " 23: 0 11 0 0 xen-percpu-ipi spinlock1\n" - " 24: 0 2050 0 0 xen-percpu-ipi resched1\n" - " 25: 0 139 0 0 xen-percpu-ipi callfunc1\n" - " 26: 0 0 0 0 xen-percpu-virq debug1\n" - " 27: 0 84 0 0 xen-percpu-ipi callfuncsingle1\n" - " 28: 0 0 1345 0 xen-percpu-virq timer2\n" - " 29: 0 0 23 0 xen-percpu-ipi spinlock2\n" - " 30: 0 0 671 0 xen-percpu-ipi resched2\n" - " 31: 0 0 161 0 xen-percpu-ipi callfunc2\n" - " 32: 0 0 0 0 xen-percpu-virq debug2\n" - " 33: 0 0 101 0 xen-percpu-ipi callfuncsingle2\n" - " 34: 0 0 0 1684 xen-percpu-virq timer3\n" - " 35: 0 0 0 15 xen-percpu-ipi spinlock3\n" - " 36: 0 0 0 1437 xen-percpu-ipi resched3\n" - " 37: 0 0 0 156 xen-percpu-ipi callfunc3\n" - " 38: 0 0 0 0 xen-percpu-virq debug3\n" - " 39: 0 0 0 118 xen-percpu-ipi callfuncsingle3\n" - " 40: 404 0 0 0 xen-dyn-event xenbus\n" - " 41: 71 0 0 0 xen-dyn-event hvc_console\n" - " 42: 0 0 0 0 xen-dyn-event vkbd\n" - " 43: 70 0 0 0 xen-dyn-event vfb\n" - " 44: 107 0 0 0 xen-dyn-event eth0\n" - "NMI: 0 0 0 0 Non-maskable interrupts\n" - "LOC: 0 0 0 0 Local timer interrupts\n" - "SPU: 0 0 0 0 Spurious interrupts\n" - "PMI: 0 0 0 0 Performance monitoring interrupts\n" - "IWI: 0 0 0 0 IRQ work interrupts\n" - "RES: 2432 2050 671 1437 Rescheduling interrupts\n" - "CAL: 267 223 262 274 Function call interrupts\n" - "TLB: 0 0 0 0 TLB shootdowns\n" - "TRM: 0 0 0 0 Thermal event interrupts\n" - "THR: 0 0 0 0 Threshold APIC interrupts\n" - "MCE: 0 0 0 0 Machine check exceptions\n" - "MCP: 0 0 0 0 Machine check polls\n" - "ERR: 0\n" - "MIS: 0\n" - "00000000-0000ffff : reserved\n" - "00010000-0009ffff : System RAM\n" - "000a0000-000fffff : reserved\n" - " 000f0000-000fffff : System ROM\n" - "00100000-807fffff : System RAM\n" - " 01000000-015cd9bb : Kernel code\n" - " 015cd9bc-0188bbff : Kernel data\n" - " 01941000-01a3ffff : Kernel bss\n" - "Starting test testcase..\n" - "Jul 26 21:03:14 g-pvops init: starting pid 2436, tty '/dev/tty0': '/bin/sh'\r\n" - "Jul 26 21:03:14 g-pvops init: starting pid 2437, tty '/dev/tty1': '/bin/sh'\r\n" - "Jul 26 21:03:14 g-pvops init: starting pid 2438, tty '/dev/ttyS0': '/bin/sh'\r\n" - "\n" - " ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.9 |~~~~~~~~~~~~~~~~~~~~~~~~~~\n" - " (c) 2001-2010 The world wide DirectFB Open Source Community\n" - " (c) 2000-2004 Convergence (integrated media) GmbH\n" - " ----------------------------------------------------------------\n" - "\n" - "(*) DirectFB/Core: Single Application Core. (2011-07-26 20:56) \n" - "Jul 26 21:03:14 g-pvops init: starting pid 2439, tty '/dev/hvc0': '/bin/sh'\r\n" - "(*) Direct/Memcpy: Using libc memcpy()\n" - "sh-4.1# (*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>...\n" - "(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...\n" - "(*) DirectFB/FBDev: Found 'xen' (ID 0) with frame buffer at 0x00000000, 2048k (MMIO 0x00000000, 0k)\n" - "(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\n" - "(*) DirectFB/Input: Keyboard 0.9 (directfb.org)\n" - "(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\n" - "(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)\n" - "(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\n" - "(*) DirectFB/Input: Xen Virtual Keyboard (1) 0.1 (directfb.org)\n" - "(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\n" - "(*) DirectFB/Input: Xen Virtual Pointer (2) 0.1 (directfb.org)\n" - "(*) Direct/Thread: Started 'Hotplug with Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\n" - "(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver \n" - "(*) DirectFB/Genefx: MMX detected and enabled\n" - "(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)\n" - "(*) DirectFB/Core/WM: Default 0.3 (directfb.org)\n" - "(*) FBDev/Mode: Setting 800x600 RGB32\n" - "(*) FBDev/Mode: Switched to 800x600 (virtual 800x600) at 32 bit (RGB32), pitch 3200\n" - "\n" - " SSH started [2319]\n" - "\n" - "\n" - "Jul 26 21:03:15 g-pvops iscsid: transport class version 2.0-870. iscsid version 2.0-872\r\n" - "Jul 26 21:03:15 g-pvops iscsid: iSCSI daemon with pid=2400 started!\r\n" - "Jul 26 21:03:15 g-pvops init: process '/bin/sh' (pid 2438) exited. Scheduling for restart.\r\n" - "Jul 26 21:03:15 g-pvops init: starting pid 2452, tty '/dev/ttyS0': '/bin/sh'\r\n" - "Jul 26 21:03:16 g-pvops init: process '/bin/sh' (pid 2452) exited. Scheduling for restart.\r\n" - "Jul 26 21:03:16 g-pvops init: starting pid 2453, tty '/dev/ttyS0': '/bin/sh'\r\n" - "Jul 26 21:03:17 g-pvops init: process '/bin/sh' (pid 2453) exited. Scheduling for restart.\r\n" - "Jul 26 21:03:17 g-pvops init: starting pid 2454, tty '/dev/ttyS0': '/bin/sh'\r\n" - "Jul 26 21:03:18 g-pvops init: process '/bin/sh' (pid 2454) exited. Scheduling for restart.\r\n" - "Jul 26 21:03:18 g-pvops init: starting pid 2455, tty '/dev/ttyS0': '/bin/sh'\r\n" - "poweroJul 26 21:03:19 g-pvops init: process '/bin/sh' (pid 2455) exited. Scheduling for restart.\r\n" - "Jul 26 21:03:19 g-pvops init: starting pid 2457, tty '/dev/ttyS0': '/bin/sh'\r\n" - "ff\n" - "Jul 26 21:03:19 g-pvops init: starting pid 2460, tty '': '/etc/init.d/halt'\r\n" - "sh-4.1# Usage: /etc/init.d/halt {start}\n" - "\rThe system is going down NOW!\n" - "Jul 26 21:03:19Jul 26 21:03:19 g-pvops \rSent SIGTERM to all processes\n" - "(!) [ 2435: 0.000] --> Caught signal 15 (sent by pid 1, uid 0) <--\n" - " (!!!) *** WARNING [still objects in 'Window Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\n" - " (!!!) *** WARNING [still objects in 'Layer Region Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\n" - " (!!!) *** WARNING [still objects in 'Layer Context Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\n" - " (!!!) *** WARNING [still objects in 'Surface Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\n" - "\rSent SIGKILL to all processes\n" - "\rRequesting system poweroff\n" - "[ 10.925177] System halted.\n" + "(early) [ 0.000000] Initializing cgroup subsys cpuset\r\n" + "(early) [ 0.000000] Initializing cgroup subsys cpu\r\n" + "(early) [ 0.000000] Linux version 3.0.0-05046-ge08dc13-dirty (konrad@phenom) (gcc version 4.4.4 20100503 (Red Hat 4.4.4-2) (GCC) ) #1 SMP PREEMPT Tue Jul 26 16:54:34 EDT 2011\r\n" + "(early) [ 0.000000] Command line: console=hvc0 debug earlyprintk=xenboot test=test\r\n" + "(early) [ 0.000000] ACPI in unprivileged domain disabled\r\n" + "(early) [ 0.000000] released 0 pages of unused memory\r\n" + "(early) [ 0.000000] Set 0 page(s) to 1-1 mapping.\r\n" + "(early) [ 0.000000] BIOS-provided physical RAM map:\r\n" + "(early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)\r\n" + "(early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)\r\n" + "(early) [ 0.000000] Xen: 0000000000100000 - 0000000080800000 (usable)\r\n" + "(early) [ 0.000000] bootconsole [xenboot0] enabled\r\n" + "(early) [ 0.000000] NX (Execute Disable) protection: active\r\n" + "(early) [ 0.000000] DMI not present or invalid.\r\n" + "(early) [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (early) (usable)(early) ==> (early) (reserved)(early) \r\n" + "(early) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (early) (usable)(early) \r\n" + "(early) [ 0.000000] No AGP bridge found\r\n" + "(early) [ 0.000000] last_pfn = 0x80800 max_arch_pfn = 0x400000000\r\n" + "(early) [ 0.000000] initial memory mapped : 0 - 1028f000\r\n" + "(early) [ 0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480\r\n" + "(early) [ 0.000000] init_memory_mapping: 0000000000000000-0000000080800000\r\n" + "(early) [ 0.000000] 0000000000 - 0080800000 page 4k\r\n" + "(early) [ 0.000000] kernel direct mapping tables up to 80800000 @ 7fbf8000-80000000\r\n" + "(early) [ 0.000000] xen: setting RW the range 7ff76000 - 80000000\r\n" + "(early) [ 0.000000] RAMDISK: 01b76000 - 1028f000\r\n" + "(early) [ 0.000000] No NUMA configuration found\r\n" + "(early) [ 0.000000] Faking a node at 0000000000000000-0000000080800000\r\n" + "(early) [ 0.000000] Initmem setup node 0 0000000000000000-0000000080800000\r\n" + "(early) [ 0.000000] NODE_DATA [000000007fffb000 - 000000007fffffff]\r\n" + "(early) [ 0.000000] Zone PFN ranges:\r\n" + "(early) [ 0.000000] DMA (early) 0x00000010 -> 0x00001000\r\n" + "(early) [ 0.000000] DMA32 (early) 0x00001000 -> 0x00100000\r\n" + "(early) [ 0.000000] Normal (early) empty\r\n" + "(early) [ 0.000000] Movable zone start PFN for each node\r\n" + "(early) [ 0.000000] early_node_map[2] active PFN ranges\r\n" + "(early) [ 0.000000] 0: 0x00000010 -> 0x000000a0\r\n" + "(early) [ 0.000000] 0: 0x00000100 -> 0x00080800\r\n" + "(early) [ 0.000000] On node 0 totalpages: 526224\r\n" + "(early) [ 0.000000] DMA zone: 56 pages used for memmap\r\n" + "(early) [ 0.000000] DMA zone: 5 pages reserved\r\n" + "(early) [ 0.000000] DMA zone: 3923 pages, LIFO batch:0\r\n" + "(early) [ 0.000000] DMA32 zone: 7140 pages used for memmap\r\n" + "(early) [ 0.000000] DMA32 zone: 515100 pages, LIFO batch:31\r\n" + "(early) [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs\r\n" + "(early) [ 0.000000] No local APIC present\r\n" + "(early) [ 0.000000] APIC: disable apic facility\r\n" + "(early) [ 0.000000] APIC: switched to apic NOOP\r\n" + "(early) [ 0.000000] nr_irqs_gsi: 16\r\n" + "(early) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000\r\n" + "(early) [ 0.000000] Allocating PCI resources starting at 80800000 (gap: 80800000:7f800000)\r\n" + "(early) [ 0.000000] Booting paravirtualized kernel on Xen\r\n" + "(early) [ 0.000000] Xen version: 4.2-unstable (preserve-AD)\r\n" + "(early) [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1\r\n" + "(early) [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fb88000 s82048 r8192 d24448 u114688\r\n" + "(early) [ 0.000000] pcpu-alloc: s82048 r8192 d24448 u114688 alloc=28*4096(early) \r\n" + "(early) [ 0.000000] pcpu-alloc: (early) [0] (early) 0 (early) [0] (early) 1 (early) [0] (early) 2 (early) [0] (early) 3 (early) \r\n" + "(early) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 519023\r\n" + "(early) [ 0.000000] Policy zone: DMA32\r\n" + "(early) [ 0.000000] Kernel command line: console=hvc0 debug earlyprintk=xenboot test=test\r\n" + "(early) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)\r\n" + "(early) [ 0.000000] Checking aperture...\r\n" + "(early) [ 0.000000] No AGP bridge found\r\n" + "(early) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area\r\n" + "(early) [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!\r\n" + "(early) [ 0.000000] Memory: 1810140k/2105344k available (5942k kernel code, 448k absent, 294756k reserved, 2808k data, 692k init)\r\n" + "(early) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1\r\n" + "(early) [ 0.000000] Preemptible hierarchical RCU implementation.\r\n" + "(early) [ 0.000000] NR_IRQS:16640 nr_irqs:304 16\r\n" + "(early) [ 0.000000] Console: colour dummy device 80x25\r\n" + "(early) [ 0.000000] console [tty0] enabled\r\n" + "[ 0.000000] console [hvc0] enabled, bootconsole disabled\r\n" + "(early) [ 0.000000] console [hvc0] enabled, bootconsole disabled\r\n" + "[ 0.000000] Xen: using vcpuop timer interface\r\n" + "[ 0.000000] installing Xen timer for CPU 0\r\n" + "[ 0.000000] Detected 3000.212 MHz processor.\r\n" + "[ 0.000000] Marking TSC unstable due to TSCs unsynchronized\r\n" + "[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.42 BogoMIPS (lpj=3000212)\r\n" + "[ 0.000999] pid_max: default: 32768 minimum: 301\r\n" + "[ 0.000999] Security Framework initialized\r\n" + "[ 0.000999] SELinux: Initializing.\r\n" + "[ 0.000999] SELinux: Starting in permissive mode\r\n" + "[ 0.000999] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)\r\n" + "[ 0.001199] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)\r\n" + "[ 0.001446] Mount-cache hash table entries: 256\r\n" + "[ 0.001596] Initializing cgroup subsys cpuacct\r\n" + "[ 0.001604] Initializing cgroup subsys freezer\r\n" + "[ 0.001642] tseg: 0000000000\r\n" + "[ 0.001653] CPU: Physical Processor ID: 0\r\n" + "[ 0.001657] CPU: Processor Core ID: 1\r\n" + "[ 0.001707] SMP alternatives: switching to UP code\r\n" + "[ 0.002069] cpu 0 spinlock event irq 17\r\n" + "[ 0.002115] Performance Events: \r\n" + "[ 0.002119] no APIC, boot with the \"lapic\" boot parameter to force-enable it.\r\n" + "[ 0.002125] no hardware sampling interrupt available.\r\n" + "[ 0.002147] Broken PMU hardware detected, using software events only.\r\n" + "[ 0.008049] MCE: In-kernel MCE decoding enabled.\r\n" + "[ 0.008074] NMI watchdog disabled (cpu0): hardware events not enabled\r\n" + "[ 0.014060] installing Xen timer for CPU 1\r\n" + "[ 0.014117] cpu 1 spinlock event irq 23\r\n" + "[ 0.014194] SMP alternatives: switching to SMP code\r\n" + "[ 0.015186] NMI watchdog disabled (cpu1): hardware events not enabled\r\n" + "[ 0.021063] installing Xen timer for CPU 2\r\n" + "[ 0.021118] cpu 2 spinlock event irq 29\r\n" + "[ 0.021368] NMI watchdog disabled (cpu2): hardware events not enabled\r\n" + "[ 0.027068] installing Xen timer for CPU 3\r\n" + "[ 0.027120] cpu 3 spinlock event irq 35\r\n" + "[ 0.027357] NMI watchdog disabled (cpu3): hardware events not enabled\r\n" + "[ 0.029063] Brought up 4 CPUs\r\n" + "[ 0.029307] kworker/u:0 used greatest stack depth: 5496 bytes left\r\n" + "[ 0.029307] Grant table initialized\r\n" + "[ 0.048886] RTC time: 165:165:165, date: 165/165/65\r\n" + "[ 0.048951] NET: Registered protocol family 16\r\n" + "[ 0.049047] Extended Config Space enabled on 0 nodes\r\n" + "[ 0.050350] PCI: setting up Xen PCI frontend stub\r\n" + "[ 0.050358] PCI: pci_cache_line_size set to 64 bytes\r\n" + "[ 0.059241] bio: create slab <bio-0> at 0\r\n" + "[ 0.060017] ACPI: Interpreter disabled.\r\n" + "[ 0.060036] xen/balloon: Initialising balloon driver.\r\n" + "[ 0.060036] last_pfn = 0x80800 max_arch_pfn = 0x400000000\r\n" + "[ 0.062260] xen-balloon: Initialising balloon driver.\r\n" + "[ 0.063073] vgaarb: loaded\r\n" + "[ 0.063073] usbcore: registered new interface driver usbfs\r\n" + "[ 0.063073] usbcore: registered new interface driver hub\r\n" + "[ 0.063073] usbcore: registered new device driver usb\r\n" + "[ 0.064030] PCI: System does not support PCI\r\n" + "[ 0.064030] PCI: System does not support PCI\r\n" + "[ 0.064053] NetLabel: Initializing\r\n" + "[ 0.064053] NetLabel: domain hash size = 128\r\n" + "[ 0.064053] NetLabel: protocols = UNLABELED CIPSOv4\r\n" + "[ 0.064053] NetLabel: unlabeled traffic allowed by default\r\n" + "[ 0.064076] Switching to clocksource xen\r\n" + "[ 0.064076] Switched to NOHz mode on CPU #3\r\n" + "[ 0.064414] Switched to NOHz mode on CPU #0\r\n" + "[ 0.064996] Switched to NOHz mode on CPU #2\r\n" + "[ 0.065113] Switched to NOHz mode on CPU #1\r\n" + "[ 0.066290] pnp: PnP ACPI: disabled\r\n" + "[ 0.071025] PCI: max bus depth: 0 pci_try_num: 1\r\n" + "[ 0.071084] NET: Registered protocol family 2\r\n" + "[ 0.071274] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)\r\n" + "[ 0.072620] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)\r\n" + "[ 0.073896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)\r\n" + "[ 0.074185] TCP: Hash tables configured (established 262144 bind 65536)\r\n" + "[ 0.074194] TCP reno registered\r\n" + "[ 0.074215] UDP hash table entries: 1024 (order: 3, 32768 bytes)\r\n" + "[ 0.074239] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)\r\n" + "[ 0.074332] NET: Registered protocol family 1\r\n" + "[ 0.074583] RPC: Registered named UNIX socket transport module.\r\n" + "[ 0.074592] RPC: Registered udp transport module.\r\n" + "[ 0.074597] RPC: Registered tcp transport module.\r\n" + "[ 0.074601] RPC: Registered tcp NFSv4.1 backchannel transport module.\r\n" + "[ 0.074609] PCI: CLS 0 bytes, default 64\r\n" + "[ 0.074726] Trying to unpack rootfs image as initramfs...\r\n" + "[ 0.316784] Freeing initrd memory: 236644k freed\r\n" + "[ 0.377411] platform rtc_cmos: registered platform RTC device (no PNP device found)\r\n" + "[ 0.378778] Machine check injector initialized\r\n" + "[ 0.379554] microcode: CPU0: patch_level=0x010000bf\r\n" + "[ 0.379574] microcode: CPU1: patch_level=0x010000bf\r\n" + "[ 0.379621] microcode: CPU2: patch_level=0x010000bf\r\n" + "[ 0.379671] microcode: CPU3: patch_level=0x010000bf\r\n" + "[ 0.379748] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba\r\n" + "[ 0.380129] audit: initializing netlink socket (disabled)\r\n" + "[ 0.380147] type=2000 audit(1311714191.306:1): initialized\r\n" + "[ 0.394045] HugeTLB registered 2 MB page size, pre-allocated 0 pages\r\n" + "[ 0.399695] VFS: Disk quotas dquot_6.5.2\r\n" + "[ 0.399844] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)\r\n" + "[ 0.400589] NTFS driver 2.1.30 [Flags: R/W].\r\n" + "[ 0.400895] msgmni has been set to 3997\r\n" + "[ 0.401041] SELinux: Registering netfilter hooks\r\n" + "[ 0.401781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)\r\n" + "[ 0.401790] io scheduler noop registered\r\n" + "[ 0.401794] io scheduler deadline registered\r\n" + "[ 0.401908] io scheduler cfq registered (default)\r\n" + "[ 0.402285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5\r\n" + "[ 0.450645] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled\r\n" + "[ 0.514817] Non-volatile memory driver v1.3\r\n" + "[ 0.514826] Linux agpgart interface v0.103\r\n" + "[ 0.515298] [drm] Initialized drm 1.1.0 20060810\r\n" + "[ 0.518170] brd: module loaded\r\n" + "[ 0.519592] loop: module loaded\r\n" + "[ 0.520265] Fixed MDIO Bus: probed\r\n" + "[ 0.520797] tun: Universal TUN/TAP device driver, 1.6\r\n" + "[ 0.520804] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>\r\n" + "[ 0.521202] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\r\n" + "[ 0.521211] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96\r\n" + "[ 0.521303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver\r\n" + "[ 0.521310] ohci_hcd: block sizes: ed 80 td 96\r\n" + "[ 0.521400] uhci_hcd: USB Universal Host Controller Interface driver\r\n" + "[ 0.521570] usbcore: registered new interface driver usblp\r\n" + "[ 0.521649] usbcore: registered new interface driver libusual\r\n" + "[ 0.521944] i8042: PNP: No PS/2 controller found. Probing ports directly.\r\n" + "[ 0.522766] i8042: No controller found\r\n" + "[ 0.523049] mousedev: PS/2 mouse device common for all mice\r\n" + "[ 0.563573] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0\r\n" + "[ 0.563697] rtc_cmos: probe of rtc_cmos failed with error -38\r\n" + "[ 0.564012] cpuidle: using governor ladder\r\n" + "[ 0.564018] cpuidle: using governor menu\r\n" + "[ 0.564023] EFI Variables Facility v0.08 2004-May-17\r\n" + "[ 0.564118] zram: num_devices not specified. Using default: 1\r\n" + "[ 0.564125] zram: Creating 1 devices ...\r\n" + "[ 0.564504] Netfilter messages via NETLINK v0.30.\r\n" + "[ 0.564525] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)\r\n" + "[ 0.564828] ctnetlink v0.93: registering with nfnetlink.\r\n" + "[ 0.565311] ip_tables: (C) 2000-2006 Netfilter Core Team\r\n" + "[ 0.565346] TCP cubic registered\r\n" + "[ 0.565351] Initializing XFRM netlink socket\r\n" + "[ 0.565760] NET: Registered protocol family 10\r\n" + "[ 0.566372] ip6_tables: (C) 2000-2006 Netfilter Core Team\r\n" + "[ 0.566433] IPv6 over IPv4 tunneling driver\r\n" + "[ 0.567372] NET: Registered protocol family 17\r\n" + "[ 0.567408] Registering the dns_resolver key type\r\n" + "[ 0.567985] PM: Hibernation image not present or could not be loaded.\r\n" + "[ 0.568005] registered taskstats version 1\r\n" + "[ 0.568041] XENBUS: Device with no driver: device/vif/0\r\n" + "[ 0.568046] XENBUS: Device with no driver: device/vfb/0\r\n" + "[ 0.568052] XENBUS: Device with no driver: device/vkbd/0\r\n" + "[ 0.568065] Magic number: 1:252:3141\r\n" + "[ 0.568211] powernow-k8: Found 1 AMD Phenom(tm) II X6 1075T Processor (4 cpu cores) (version 2.20.00)\r\n" + "[ 0.568237] powernow-k8: Core Performance Boosting: on.\r\n" + "[ 0.568253] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.\r\n" + "[ 0.568254] [Firmware Bug]: powernow-k8: Try again with latest BIOS.\r\n" + "[ 0.568769] Freeing unused kernel memory: 692k freed\r\n" + "[ 0.568966] Write protecting the kernel read-only data: 8192k\r\n" + "[ 0.572048] Freeing unused kernel memory: 180k freed\r\n" + "[ 0.572251] Freeing unused kernel memory: 328k freed\r\n" + "\rinit started: BusyBox v1.14.3 (2011-07-26 16:55:54 EDT)\r\n" + "[ 0.579282] consoletype used greatest stack depth: 5376 bytes left\r\n" + "Mounting directories [ OK ]\r\r\n" + "[ 0.799316] modprobe used greatest stack depth: 5136 bytes left\r\n" + "mount: mount point /sys/kernel/config does not exist\r\n" + "[ 0.806063] core_filesystem used greatest stack depth: 5024 bytes left\r\n" + "[ 0.818750] input: Xen Virtual Keyboard as /devices/virtual/input/input0\r\n" + "[ 0.819044] input: Xen Virtual Pointer as /devices/virtual/input/input1\r\n" + "[ 1.041570] Initialising Xen virtual ethernet driver.\r\n" + "[ 1.158627] ------------[ cut here ]------------\r\n" + "[ 1.158669] WARNING: at /home/konrad/ssd/linux/fs/proc/base.c:1123 oom_adjust_write+0x294/0x2b0()\r\n" + "[ 1.158677] udevd (1192): /proc/1192/oom_adj is deprecated, please use /proc/1192/oom_score_adj instead.\r\n" + "[ 1.158685] Modules linked in: xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs\r\n" + "[ 1.158711] Pid: 1192, comm: udevd Not tainted 3.0.0-05046-ge08dc13-dirty #1\r\n" + "[ 1.158717] Call Trace:\r\n" + "[ 1.158725] [<ffffffff810921da>] warn_slowpath_common+0x7a/0xb0\r\n" + "[ 1.158733] [<ffffffff810922b1>] warn_slowpath_fmt+0x41/0x50\r\n" + "[ 1.158740] [<ffffffff8109de85>] ? ns_capable+0x25/0x60\r\n" + "[ 1.158747] [<ffffffff811d4d44>] oom_adjust_write+0x294/0x2b0\r\n" + "[ 1.158755] [<ffffffff81175698>] vfs_write+0xc8/0x190\r\n" + "[ 1.158761] [<ffffffff8117584c>] sys_write+0x4c/0x90\r\n" + "[ 1.158769] [<ffffffff815c8512>] system_call_fastpath+0x16/0x1b\r\n" + "[ 1.158775] ---[ end trace 53a836e564b32553 ]---\r\n" + "[ 1.289040] ip used greatest stack depth: 3936 bytes left\r\n" + "Waiting for devices [ OK ]\r\r\n" + "Waiting for fb [ OK ]\r\r\n" + "Starting..[/dev/fb0]\r\n" + "/dev/fb0: len:0\r\n" + "/dev/fb0: bits/pixel32\r\n" + "(7fdbfe873000): Writting .. [800:600]\r\n" + "Done!\r\n" + "FATAL: Module agpgart_intel not found.\r\n" + "[ 1.420253] Console: switching to colour frame buffer device 100x37\r\n" + "[ 1.462964] [drm] radeon kernel modesetting enabled.\r\n" + "WARNING: Error inserting wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/wmi.ko): No such device\r\n" + "WARNING: Error inserting mxm_wmi (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/platform/x86/mxm-wmi.ko): No such device\r\n" + "WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device\r\n" + "WARNING: Error inserting ttm (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device\r\n" + "FATAL: Error inserting nouveau (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device\r\n" + "WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device\r\n" + "FATAL: Error inserting i915 (/lib/modules/3.0.0-05046-ge08dc13-dirty/kernel/drivers/gpu/drm/i915/i915.ko): No such device\r\n" + "Starting..[/dev/fb0]\r\n" + "/dev/fb0: len:0\r\n" + "/dev/fb0: bits/pixel32\r\n" + "(7fecfee0e000): Writting .. [800:600]\r\n" + "Done!\r\n" + "VGA: 0000:\r\n" + "Waiting for network [ OK ]\r\r\n" + "Bringing up loopback interface: [ OK ]\r\r\n" + "Bringing up interface eth0: [ 1.785668] device eth0 entered promiscuous mode\r\n" + "[ OK ]\r\r\n" + "Bringing up interface switch: \r\n" + "Determining IP information for switch...[ 1.843220] switch: port 1(eth0) entering forwarding state\r\n" + "[ 1.843271] switch: port 1(eth0) entering forwarding state\r\n" + " done.\r\n" + "[ OK ]\r\r\n" + "Waiting for init.custom [ OK ]\r\r\n" + "Start sshd\r\n" + "PING master.dumpdata.com (192.168.101.1) 56(84) bytes of data.\r\n" + "\r\n" + "--- master.dumpdata.com ping statistics ---\r\n" + "1 packets transmitted, 1 received, 0% packet loss, time 1ms\r\n" + "rtt min/avg/max/mdev = 0.365/0.365/0.365/0.000 ms\r\n" + "mount.nfs: rpc.statd is not running but is required for remote locking.\r\n" + "mount.nfs: Either use '-o nolock' to keep locks local, or start statd.\r\n" + "mount.nfs: an incorrect mount option was specified\r\n" + "\r\n" + "Starting SSHd ...\r\n" + "[ 3.190254] mount.nfs used greatest stack depth: 3648 bytes left\r\n" + "[ 3.193509] [drm] Module unloaded\r\n" + "ERROR: Module nouveau does not exist in /proc/modules\r\n" + "libxl: error: libxl.c:61:libxl_ctx_alloc: Is xenstore daemon running?\r\n" + "failed to stat /var/run/xenstored.pid: No such file or directory\r\n" + "cannot init xl context\r\n" + "Waiting for SSHd [ OK ]\r\r\n" + "WARNING: ssh currently running [2319] ignoring start request\r\n" + "[ 3.359346] SCSI subsystem initialized\r\n" + "[ 3.361222] Loading iSCSI transport class v2.0-870.\r\n" + "[ 3.364431] iscsi: registered transport (tcp)\r\n" + "iscsistart: transport class version 2.0-870. iscsid version 2.0-872\r\n" + "Could not get list of targets from firmware.\r\n" + "Jul 26 21:03:14 g-pvops syslogd 1.5.0: restart.\r\r\n" + "FATAL: Module evtchn not found.\r\n" + "[ 3.400467] Event-channel device installed.\r\n" + "xencommons should be started first.\r\n" + " CPU0 CPU1 CPU2 CPU3 \r\n" + " 16: 1720 0 0 0 xen-percpu-virq timer0\r\n" + " 17: 8 0 0 0 xen-percpu-ipi spinlock0\r\n" + " 18: 2432 0 0 0 xen-percpu-ipi resched0\r\n" + " 19: 162 0 0 0 xen-percpu-ipi callfunc0\r\n" + " 20: 0 0 0 0 xen-percpu-virq debug0\r\n" + " 21: 105 0 0 0 xen-percpu-ipi callfuncsingle0\r\n" + " 22: 0 1724 0 0 xen-percpu-virq timer1\r\n" + " 23: 0 11 0 0 xen-percpu-ipi spinlock1\r\n" + " 24: 0 2050 0 0 xen-percpu-ipi resched1\r\n" + " 25: 0 139 0 0 xen-percpu-ipi callfunc1\r\n" + " 26: 0 0 0 0 xen-percpu-virq debug1\r\n" + " 27: 0 84 0 0 xen-percpu-ipi callfuncsingle1\r\n" + " 28: 0 0 1345 0 xen-percpu-virq timer2\r\n" + " 29: 0 0 23 0 xen-percpu-ipi spinlock2\r\n" + " 30: 0 0 671 0 xen-percpu-ipi resched2\r\n" + " 31: 0 0 161 0 xen-percpu-ipi callfunc2\r\n" + " 32: 0 0 0 0 xen-percpu-virq debug2\r\n" + " 33: 0 0 101 0 xen-percpu-ipi callfuncsingle2\r\n" + " 34: 0 0 0 1684 xen-percpu-virq timer3\r\n" + " 35: 0 0 0 15 xen-percpu-ipi spinlock3\r\n" + " 36: 0 0 0 1437 xen-percpu-ipi resched3\r\n" + " 37: 0 0 0 156 xen-percpu-ipi callfunc3\r\n" + " 38: 0 0 0 0 xen-percpu-virq debug3\r\n" + " 39: 0 0 0 118 xen-percpu-ipi callfuncsingle3\r\n" + " 40: 404 0 0 0 xen-dyn-event xenbus\r\n" + " 41: 71 0 0 0 xen-dyn-event hvc_console\r\n" + " 42: 0 0 0 0 xen-dyn-event vkbd\r\n" + " 43: 70 0 0 0 xen-dyn-event vfb\r\n" + " 44: 107 0 0 0 xen-dyn-event eth0\r\n" + "NMI: 0 0 0 0 Non-maskable interrupts\r\n" + "LOC: 0 0 0 0 Local timer interrupts\r\n" + "SPU: 0 0 0 0 Spurious interrupts\r\n" + "PMI: 0 0 0 0 Performance monitoring interrupts\r\n" + "IWI: 0 0 0 0 IRQ work interrupts\r\n" + "RES: 2432 2050 671 1437 Rescheduling interrupts\r\n" + "CAL: 267 223 262 274 Function call interrupts\r\n" + "TLB: 0 0 0 0 TLB shootdowns\r\n" + "TRM: 0 0 0 0 Thermal event interrupts\r\n" + "THR: 0 0 0 0 Threshold APIC interrupts\r\n" + "MCE: 0 0 0 0 Machine check exceptions\r\n" + "MCP: 0 0 0 0 Machine check polls\r\n" + "ERR: 0\r\n" + "MIS: 0\r\n" + "00000000-0000ffff : reserved\r\n" + "00010000-0009ffff : System RAM\r\n" + "000a0000-000fffff : reserved\r\n" + " 000f0000-000fffff : System ROM\r\n" + "00100000-807fffff : System RAM\r\n" + " 01000000-015cd9bb : Kernel code\r\n" + " 015cd9bc-0188bbff : Kernel data\r\n" + " 01941000-01a3ffff : Kernel bss\r\n" + "Starting test testcase..\r\n" + "Jul 26 21:03:14 g-pvops init: starting pid 2436, tty '/dev/tty0': '/bin/sh'\r\r\n" + "Jul 26 21:03:14 g-pvops init: starting pid 2437, tty '/dev/tty1': '/bin/sh'\r\r\n" + "Jul 26 21:03:14 g-pvops init: starting pid 2438, tty '/dev/ttyS0': '/bin/sh'\r\r\n" + "\r\n" + " ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.9 |~~~~~~~~~~~~~~~~~~~~~~~~~~\r\n" + " (c) 2001-2010 The world wide DirectFB Open Source Community\r\n" + " (c) 2000-2004 Convergence (integrated media) GmbH\r\n" + " ----------------------------------------------------------------\r\n" + "\r\n" + "(*) DirectFB/Core: Single Application Core. (2011-07-26 20:56) \r\n" + "Jul 26 21:03:14 g-pvops init: starting pid 2439, tty '/dev/hvc0': '/bin/sh'\r\r\n" + "(*) Direct/Memcpy: Using libc memcpy()\r\n" + "sh-4.1# (*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) DirectFB/FBDev: Found 'xen' (ID 0) with frame buffer at 0x00000000, 2048k (MMIO 0x00000000, 0k)\r\n" + "(*) Direct/Thread: Started 'Keyboard Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) DirectFB/Input: Keyboard 0.9 (directfb.org)\r\n" + "(*) Direct/Thread: Started 'PS/2 Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) DirectFB/Input: IMPS/2 Mouse 1.0 (directfb.org)\r\n" + "(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) DirectFB/Input: Xen Virtual Keyboard (1) 0.1 (directfb.org)\r\n" + "(*) Direct/Thread: Started 'Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) DirectFB/Input: Xen Virtual Pointer (2) 0.1 (directfb.org)\r\n" + "(*) Direct/Thread: Started 'Hotplug with Linux Input' (-1) [INPUT OTHER/OTHER 0/0] <8388608>...\r\n" + "(*) DirectFB/Input: Hot-plug detection enabled with Linux Input Driver \r\n" + "(*) DirectFB/Genefx: MMX detected and enabled\r\n" + "(*) DirectFB/Graphics: MMX Software Rasterizer 0.6 (directfb.org)\r\n" + "(*) DirectFB/Core/WM: Default 0.3 (directfb.org)\r\n" + "(*) FBDev/Mode: Setting 800x600 RGB32\r\n" + "(*) FBDev/Mode: Switched to 800x600 (virtual 800x600) at 32 bit (RGB32), pitch 3200\r\n" + "\r\n" + " SSH started [2319]\r\n" + "\r\n" + "\r\n" + "Jul 26 21:03:15 g-pvops iscsid: transport class version 2.0-870. iscsid version 2.0-872\r\r\n" + "Jul 26 21:03:15 g-pvops iscsid: iSCSI daemon with pid=2400 started!\r\r\n" + "Jul 26 21:03:15 g-pvops init: process '/bin/sh' (pid 2438) exited. Scheduling for restart.\r\r\n" + "Jul 26 21:03:15 g-pvops init: starting pid 2452, tty '/dev/ttyS0': '/bin/sh'\r\r\n" + "Jul 26 21:03:16 g-pvops init: process '/bin/sh' (pid 2452) exited. Scheduling for restart.\r\r\n" + "Jul 26 21:03:16 g-pvops init: starting pid 2453, tty '/dev/ttyS0': '/bin/sh'\r\r\n" + "Jul 26 21:03:17 g-pvops init: process '/bin/sh' (pid 2453) exited. Scheduling for restart.\r\r\n" + "Jul 26 21:03:17 g-pvops init: starting pid 2454, tty '/dev/ttyS0': '/bin/sh'\r\r\n" + "Jul 26 21:03:18 g-pvops init: process '/bin/sh' (pid 2454) exited. Scheduling for restart.\r\r\n" + "Jul 26 21:03:18 g-pvops init: starting pid 2455, tty '/dev/ttyS0': '/bin/sh'\r\r\n" + "poweroJul 26 21:03:19 g-pvops init: process '/bin/sh' (pid 2455) exited. Scheduling for restart.\r\r\n" + "Jul 26 21:03:19 g-pvops init: starting pid 2457, tty '/dev/ttyS0': '/bin/sh'\r\r\n" + "ff\r\n" + "Jul 26 21:03:19 g-pvops init: starting pid 2460, tty '': '/etc/init.d/halt'\r\r\n" + "sh-4.1# Usage: /etc/init.d/halt {start}\r\n" + "\rThe system is going down NOW!\r\n" + "Jul 26 21:03:19Jul 26 21:03:19 g-pvops \rSent SIGTERM to all processes\r\n" + "(!) [ 2435: 0.000] --> Caught signal 15 (sent by pid 1, uid 0) <--\r\n" + " (!!!) *** WARNING [still objects in 'Window Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r\n" + " (!!!) *** WARNING [still objects in 'Layer Region Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r\n" + " (!!!) *** WARNING [still objects in 'Layer Context Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r\n" + " (!!!) *** WARNING [still objects in 'Surface Pool'] *** [object.c:241 in fusion_object_pool_destroy()]\r\n" + "\rSent SIGKILL to all processes\r\n" + "\rRequesting system poweroff\r\n" + "[ 10.925177] System halted.\r\n" "Parsing config file /root/pv.xm\n" Daemon running with PID 18759 -8a5628886412ad16571c867d5993a54417486bd96fbacfa03fef3e4f48d2e186 +12c573256f05ff858bbd619d04271bd2ad33ffe3d190807d2748a180639530a9
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.