Re: [PATCH v3 00/11] bcma: add support for embedded devices like bcm4716

[Ralf Baechle <ralf@linux-mips.org>]

On Sat, Jul 23, 2011 at 01:20:04AM +0200, Hauke Mehrtens wrote:

> This patch series adds support for embedded devices like bcm47xx to 
> bcma. Bcma is used on bcm4716 and bcm4718 SoCs as the system bus and
> replaced ssb used on older devices. With these patches my bcm4716 
> device boots up till it tries to access the flash, because the serial 
> flash chip is unsupported for now, this will be my next task. This adds 
> support for MIPS cores, interrupt configuration and the serial console.
> 
> These patches are not containing all functions needed to get the SoC to 
> fully work and support every feature, but it is a good start.
> These patches are now integrated in OpenWrt for everyone how wants to
> test them.
> 
> This was tested with a BCM4704 device (SoC with ssb bus), a BCM4716 
> device and a pcie wireless card supported by bcma.
> 
> @John could you please merge this into wireless-testing. I hope Ralf is 
> fine with it when some MIPS bits will go through wireless. This will 
> make it much easier for Linus to merge wireless-testing and the mips 
> tree together as there are many other changes for bcma in wireless-
> testing.

John, if you want to merge the MIPS bits through the wireless tree, feel
free to:

Acked-by: Ralf Baechle <ralf@linux-mips.org>

  Ralf