From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Barry Song <21cnbao@gmail.com>
Cc: dmitry.torokhov@gmail.com, Liam Girdwood <lrg@ti.com>,
Grant Likely <grant.likely@secretlab.ca>,
alsa-devel@alsa-project.org, devicetree-discuss@lists.ozlabs.org,
linux-input@vger.kernel.org
Subject: Re: [alsa-devel] [PATCH] ASoC: Add device tree binding for WM8753
Date: Mon, 8 Aug 2011 17:55:03 +0900 [thread overview]
Message-ID: <20110808085459.GA12376@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <CAGsJ_4y2tDb3ZBPo8bCtrjFt0OWzR8WeG+kL_RKJPRP7-pZopw@mail.gmail.com>
On Mon, Aug 08, 2011 at 04:38:41PM +0800, Barry Song wrote:
> 2011/8/8 Mark Brown <broonie@opensource.wolfsonmicro.com>:
> > Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Without this patch, DT can still connect driver with device by the
> heuristic way(of_modalias_node).
Well, the other part of things is that it explicitly defines the
bindings (including qualification for the manufacturer, for Wolfson I
know we've got an occasional collision with chips from Wondermedia who
also use wm as a prefix for their part numbers). The match tables
aren't particularly exciting in themselves but they're also very low
cost.
>
> i have a patch just like yours in input subsystem "[PATCH v2] input:
> touchscreen: add OF match table for ads7846" with "Acked-by: Grant
> Likely", but Dmitry seems to just ignore it.
>
> so not sure whether this kind of new added match tables are totally
> liked by people or not.
>
> > ---
> > Documentation/devicetree/bindings/sound/wm8753.txt | 18 ++++++++++++++++++
> > sound/soc/codecs/wm8753.c | 9 +++++++++
> > 2 files changed, 27 insertions(+), 0 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/sound/wm8753.txt
> >
> > diff --git a/Documentation/devicetree/bindings/sound/wm8753.txt b/Documentation/devicetree/bindings/sound/wm8753.txt
> > new file mode 100644
> > index 0000000..e65277a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/wm8753.txt
> > @@ -0,0 +1,18 @@
> > +WM8753 audio CODEC
> > +
> > +This device supports both I2C and SPI (configured with pin strapping
> > +on the board).
> > +
> > +Required properties:
> > +
> > + - compatible : "wlf,wm8753"
> > +
> > + - reg : the I2C address of the device for I2C, the chip select
> > + number for SPI.
> > +
> > +Example:
> > +
> > +codec: wm8737@1a {
> > + compatible = "wlf,wm8753";
> > + reg = <0x1a>;
> > +};
> > diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
> > index a702550..fe04a10 100644
> > --- a/sound/soc/codecs/wm8753.c
> > +++ b/sound/soc/codecs/wm8753.c
> > @@ -38,6 +38,7 @@
> > #include <linux/delay.h>
> > #include <linux/pm.h>
> > #include <linux/i2c.h>
> > +#include <linux/of_device.h>
> > #include <linux/platform_device.h>
> > #include <linux/spi/spi.h>
> > #include <linux/slab.h>
> > @@ -1490,6 +1491,12 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8753 = {
> > .reg_cache_default = wm8753_reg,
> > };
> >
> > +static const struct of_device_id wm8753_of_match[] = {
> > + { .compatible = "wlf,wm8753", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, wm8753_of_match);
> > +
> > #if defined(CONFIG_SPI_MASTER)
> > static int __devinit wm8753_spi_probe(struct spi_device *spi)
> > {
> > @@ -1521,6 +1528,7 @@ static struct spi_driver wm8753_spi_driver = {
> > .driver = {
> > .name = "wm8753",
> > .owner = THIS_MODULE,
> > + .of_match_table = wm8753_of_match,
> > },
> > .probe = wm8753_spi_probe,
> > .remove = __devexit_p(wm8753_spi_remove),
> > @@ -1565,6 +1573,7 @@ static struct i2c_driver wm8753_i2c_driver = {
> > .driver = {
> > .name = "wm8753",
> > .owner = THIS_MODULE,
> > + .of_match_table = wm8753_of_match,
> > },
> > .probe = wm8753_i2c_probe,
> > .remove = __devexit_p(wm8753_i2c_remove),
> > --
> > 1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2011-08-08 8:55 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-08 4:37 [PATCH] ASoC: Add device tree binding for WM8753 Mark Brown
2011-08-08 8:38 ` [alsa-devel] " Barry Song
2011-08-08 8:55 ` Mark Brown [this message]
2011-08-09 6:51 ` Dmitry Torokhov
2011-08-09 14:28 ` Mark Brown
2011-08-10 1:21 ` [alsa-devel] " Barry Song
2011-08-10 4:51 ` Mark Brown
2011-08-10 5:57 ` Barry Song
2011-08-10 6:30 ` Mark Brown
2011-08-12 3:16 ` Barry Song
2011-08-12 3:53 ` Dmitry Torokhov
2011-08-12 4:35 ` Barry Song
2011-08-12 4:41 ` [alsa-devel] " Mark Brown
2011-08-12 5:57 ` Dmitry Torokhov
2011-08-12 6:07 ` Mark Brown
2011-08-08 15:46 ` Liam Girdwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110808085459.GA12376@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=21cnbao@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dmitry.torokhov@gmail.com \
--cc=grant.likely@secretlab.ca \
--cc=linux-input@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.