From: John W. Linville <linville@tuxdriver.com>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org
Subject: [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware
Date: Thu, 11 Aug 2011 12:04:24 -0400 [thread overview]
Message-ID: <20110811160424.GC2566@tuxdriver.com> (raw)
In-Reply-To: <CACna6rxtkq7QGm52aunVZnqY48uO4+FL18S4kpuvYax55TePZQ@mail.gmail.com>
On Thu, Aug 11, 2011 at 10:05:19AM +0200, Rafa? Mi?ecki wrote:
> W dniu 11 sierpnia 2011 06:39 u?ytkownik Larry Finger
> <Larry.Finger@lwfinger.net> napisa?:
> > On 08/10/2011 07:14 PM, Rafa? Mi?ecki wrote:
> >>
> >> W dniu 10 sierpnia 2011 20:35 u?ytkownik Rafa? Mi?ecki
> >> <zajec5@gmail.com> ?napisa?:
> >>>
> >>> Some hardware with 64-bit DMA uses lower address word for setting
> >>> routing (translation) bit. Add workaround for such boards.
> >>>
> >>> Signed-off-by: Rafa? Mi?ecki<zajec5@gmail.com>
> >>> ---
> >>> This requires testing on at least 1 normal 64-bit DMA card and 1 32-bit
> >>> DMA card. So far it was tested only on my 14e4:4329 where it fixed DMA.
> >>
> >> 14e4:4353 (BCM43224), 64-bit DMA, still works :)
> >>
> >> The rest will follow tomorrow.
> >
> > Tested with 14e4:4311 (64-bit) and 14e4:4318 (32-bit). The ssb changes were
> > also tested with b43legacy.
>
> Thanks Larry.
>
> I've additionally tested this on 14e4:4312 (BCM4311), 32-bit DMA. Works OK.
>
> John: please take this patchset.
Are these fixes intended for 3.1?
--
John W. Linville Someday the world will need a hero, and you
linville at tuxdriver.com might be all we have. Be ready.
WARNING: multiple messages have this Message-ID (diff)
From: "John W. Linville" <linville@tuxdriver.com>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>,
linux-wireless@vger.kernel.org, b43-dev@lists.infradead.org
Subject: Re: [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware
Date: Thu, 11 Aug 2011 12:04:24 -0400 [thread overview]
Message-ID: <20110811160424.GC2566@tuxdriver.com> (raw)
In-Reply-To: <CACna6rxtkq7QGm52aunVZnqY48uO4+FL18S4kpuvYax55TePZQ@mail.gmail.com>
On Thu, Aug 11, 2011 at 10:05:19AM +0200, Rafał Miłecki wrote:
> W dniu 11 sierpnia 2011 06:39 użytkownik Larry Finger
> <Larry.Finger@lwfinger.net> napisał:
> > On 08/10/2011 07:14 PM, Rafał Miłecki wrote:
> >>
> >> W dniu 10 sierpnia 2011 20:35 użytkownik Rafał Miłecki
> >> <zajec5@gmail.com> napisał:
> >>>
> >>> Some hardware with 64-bit DMA uses lower address word for setting
> >>> routing (translation) bit. Add workaround for such boards.
> >>>
> >>> Signed-off-by: Rafał Miłecki<zajec5@gmail.com>
> >>> ---
> >>> This requires testing on at least 1 normal 64-bit DMA card and 1 32-bit
> >>> DMA card. So far it was tested only on my 14e4:4329 where it fixed DMA.
> >>
> >> 14e4:4353 (BCM43224), 64-bit DMA, still works :)
> >>
> >> The rest will follow tomorrow.
> >
> > Tested with 14e4:4311 (64-bit) and 14e4:4318 (32-bit). The ssb changes were
> > also tested with b43legacy.
>
> Thanks Larry.
>
> I've additionally tested this on 14e4:4312 (BCM4311), 32-bit DMA. Works OK.
>
> John: please take this patchset.
Are these fixes intended for 3.1?
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next prev parent reply other threads:[~2011-08-11 16:04 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-10 18:35 [RFC][RFT][PATCH V2 1/2] ssb: fix DMA translation for some specific boards Rafał Miłecki
2011-08-10 18:35 ` Rafał Miłecki
2011-08-10 18:35 ` [RFC][RFT][PATCH V2 2/2] b43: fix DMA on some bugged hardware Rafał Miłecki
2011-08-10 18:35 ` Rafał Miłecki
2011-08-10 19:11 ` Michael Büsch
2011-08-10 19:11 ` Michael Büsch
2011-08-11 0:14 ` Rafał Miłecki
2011-08-11 0:14 ` Rafał Miłecki
2011-08-11 4:39 ` Larry Finger
2011-08-11 4:39 ` Larry Finger
2011-08-11 8:05 ` Rafał Miłecki
2011-08-11 8:05 ` Rafał Miłecki
2011-08-11 16:04 ` John W. Linville [this message]
2011-08-11 16:04 ` John W. Linville
2011-08-11 16:21 ` Rafał Miłecki
2011-08-11 16:21 ` Rafał Miłecki
2011-08-11 16:22 ` Rafał Miłecki
2011-08-11 16:22 ` Rafał Miłecki
2011-08-13 22:26 ` Larry Finger
2011-08-13 22:26 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110811160424.GC2566@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=Larry.Finger@lwfinger.net \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.