From: Guenter Roeck <guenter.roeck@ericsson.com>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] lm_sensors: sensors output
Date: Sun, 14 Aug 2011 17:47:08 +0000 [thread overview]
Message-ID: <20110814174708.GA5790@ericsson.com> (raw)
In-Reply-To: <CAAv-bCz-NKoaLr3=L8_AkEg2fQyuadHrh=kQax89_bu3H-mUxg@mail.gmail.com>
On Sat, Aug 13, 2011 at 06:44:53AM -0400, João M. S. Silva wrote:
> Hi,
>
> Yes, the sensors daemon is loading it:
>
> [jmss@steklov ~]$ lsmod |grep it87
> it87 19266 0
> hwmon_vid 2056 1 it87
>
> When I restart the sensors daemon it prints this to the system log:
> Aug 13 11:45:04 localhost kernel: [32388.581173] it87: Found IT8705F
> chip at 0x290, revision 2
>
Guess we'll have to wait for feedback from the it87 driver folks.
On a side note, please don't top-post.
Thanks,
Guenter
> On Fri, Aug 12, 2011 at 7:32 PM, Guenter Roeck
> <guenter.roeck@ericsson.com> wrote:
> > On Fri, Aug 12, 2011 at 07:06:07AM -0400, João M. S. Silva wrote:
> >> Hi,
> >>
> >> When I type "sensors", I get:
> >>
> >> acpitz-virtual-0
> >> Adapter: Virtual device
> >> temp1: +51.0°C (crit = +105.0°C)
> >>
> >> and nothing else. I can't seem to get the chipset info.
> >>
> >> "sensors-detect" detected:
> >>
> >> (...)
> >> Now follows a summary of the probes I have just done.
> >> Just press ENTER to continue:
> >>
> >> Driver `it87':
> >> * ISA bus, address 0x290
> >> Chip `ITE IT8705F Super IO Sensors' (confidence: 9)
> >>
> >> Do you want to generate /etc/conf.d/lm_sensors? (YES/no):
> >> You should now start the lm_sensors service to load the required
> >> kernel modules.
> >>
> >> Unloading i2c-dev... OK
> >> Unloading cpuid... OK
> >> (...)
> >>
> >> Why doesn't "sensors" print it87-related info?
> >>
> >> I don't know if it is related, but sometimes the temperature gets very
> >> high (I notice it with my fingers) and I have to reboot; then the fan
> >> runs at full speed for about 2 min to cool the CPU.
> >>
> >> Any help?
> >>
> > Did you add it87 to the list of modules to load, and is it loaded ?
> > You should see that with the "lsmod" command.
> >
> > Guenter
> >
>
>
>
> --
> João M. S. Silva
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
prev parent reply other threads:[~2011-08-14 17:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-12 11:06 [lm-sensors] lm_sensors: sensors output João M. S. Silva
2011-08-12 18:32 ` Guenter Roeck
2011-08-13 10:44 ` João M. S. Silva
2011-08-14 17:47 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110814174708.GA5790@ericsson.com \
--to=guenter.roeck@ericsson.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.