From mboxrd@z Thu Jan 1 00:00:00 1970 From: s.hauer@pengutronix.de (Sascha Hauer) Date: Wed, 17 Aug 2011 08:48:54 +0200 Subject: [PATCH v3 1/3] ARM: i.MX51: Remove _MX51_PAD_xxx references In-Reply-To: <4E4AC27A.9030608@boundarydevices.com> References: <1313265101-11478-1-git-send-email-troy.kisky@boundarydevices.com> <20110816072603.GW31404@pengutronix.de> <4E4AC27A.9030608@boundarydevices.com> Message-ID: <20110817064854.GD31404@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, Aug 16, 2011 at 12:18:18PM -0700, Troy Kisky wrote: > On 8/16/2011 12:26 AM, Sascha Hauer wrote: > > On Sat, Aug 13, 2011 at 12:51:41PM -0700, Troy Kisky wrote: > >> Use new macro NEW_PAD_CTRL to remove _MX51_PAD_xxx references. > >> A later patch will remove the _MX51_PAD_xxx symbols. > >> > >> Signed-off-by: Troy Kisky > >> --- > >> arch/arm/mach-mx5/board-cpuimx51sd.c | 2 +- > >> arch/arm/mach-mx5/board-mx51_babbage.c | 4 ++-- > >> arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c | 4 ++-- > >> arch/arm/plat-mxc/include/mach/iomux-v3.h | 1 + > >> 4 files changed, 6 insertions(+), 5 deletions(-) > >> > >> > >> Changes since v2: add () around cfg in NEW_PAD_CTRL macro > >> as noticed by Sascha. > >> > >> 2/3 and 3/3 are the same as v2 and are not reposted. > > > > Applied this one. Can you send me the whole 2/3 and 3/3 patches? > > I only have the sed scripts which I don't want to execute manually. > > > > Sascha > > > I'll send you the patch against mainline. > if you want it against a different branch, let me know. Mainline is fine. Applied them for cleanups. Thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |