All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Jones <davej@redhat.com>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>, Keith Packard <keithp@keithp.com>
Subject: backlight duplicate registration
Date: Wed, 17 Aug 2011 10:10:10 -0400	[thread overview]
Message-ID: <20110817141010.GA21479@redhat.com> (raw)

This has started showing up on my laptop in the last day or two
(probably since aaa6fd2a004147bf32fce05720938236de3361d9)

	Dave

vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
------------[ cut here ]------------
WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x97/0xab()
Hardware name: Adamo 13   
sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight'
Modules linked in: i915(+) drm_kms_helper drm i2c_algo_bit i2c_core video
Pid: 137, comm: modprobe Not tainted 3.1.0-rc2+ #137
Call Trace:
 [<ffffffff8105df5c>] warn_slowpath_common+0x83/0x9b
 [<ffffffff8105e017>] warn_slowpath_fmt+0x46/0x48
 [<ffffffff811a58a8>] sysfs_add_one+0x97/0xab
 [<ffffffff811a5930>] create_dir+0x74/0xad
 [<ffffffff811a5a1a>] sysfs_create_dir+0x90/0xa7
 [<ffffffff8126ff74>] kobject_add_internal+0xcb/0x18c
 [<ffffffff8127036e>] kobject_add+0x91/0xa2
 [<ffffffff8133729f>] device_add+0xd5/0x576
 [<ffffffff813419b9>] ? pm_runtime_init+0x106/0x10a
 [<ffffffff8133775b>] device_register+0x1b/0x1f
 [<ffffffff812b788f>] backlight_device_register+0x10f/0x17f
 [<ffffffffa009af3b>] intel_panel_setup_backlight+0x7d/0xd2 [i915]
 [<ffffffffa00904c5>] intel_modeset_init+0xd62/0xe73 [i915]
 [<ffffffffa006e385>] i915_driver_load+0x8f4/0xdc0 [i915]
 [<ffffffff8133775b>] ? device_register+0x1b/0x1f
 [<ffffffffa0026c4a>] drm_get_pci_dev+0x170/0x26c [drm]
 [<ffffffffa00a4ab7>] i915_pci_probe+0x1b/0x1d [i915]
 [<ffffffff81291bc7>] local_pci_probe+0x44/0x75
 [<ffffffff8129274a>] pci_device_probe+0xcd/0xfc
 [<ffffffff813397aa>] driver_probe_device+0xb5/0x150
 [<ffffffff813398a3>] __driver_attach+0x5e/0x81
 [<ffffffff81339845>] ? driver_probe_device+0x150/0x150
 [<ffffffff813389c2>] bus_for_each_dev+0x59/0x8f
 [<ffffffff8133945b>] driver_attach+0x1e/0x20
 [<ffffffff8133909c>] bus_add_driver+0xb0/0x206
 [<ffffffff81339d4a>] driver_register+0x98/0x105
 [<ffffffff8129301d>] __pci_register_driver+0x66/0xd1
 [<ffffffffa0026dd0>] drm_pci_init+0x8a/0xef [drm]
 [<ffffffffa00d0000>] ? 0xffffffffa00cffff
 [<ffffffff8109c883>] sys_init_module+0x114/0x267
 [<ffffffff814ef542>] system_call_fastpath+0x16/0x1b
---[ end trace a98c7fa70c5006a7 ]---
kobject_add_internal failed for intel_backlight with -EEXIST, don't try to register things with the same name in the same directory.
Pid: 137, comm: modprobe Tainted: G        W   3.1.0-rc2+ #137
Call Trace:
 [<ffffffff81270005>] kobject_add_internal+0x15c/0x18c
 [<ffffffff8127036e>] kobject_add+0x91/0xa2
 [<ffffffff8133729f>] device_add+0xd5/0x576
 [<ffffffff813419b9>] ? pm_runtime_init+0x106/0x10a
 [<ffffffff8133775b>] device_register+0x1b/0x1f
 [<ffffffff812b788f>] backlight_device_register+0x10f/0x17f
 [<ffffffffa009af3b>] intel_panel_setup_backlight+0x7d/0xd2 [i915]
 [<ffffffffa00904c5>] intel_modeset_init+0xd62/0xe73 [i915]
 [<ffffffffa006e385>] i915_driver_load+0x8f4/0xdc0 [i915]
 [<ffffffff8133775b>] ? device_register+0x1b/0x1f
 [<ffffffffa0026c4a>] drm_get_pci_dev+0x170/0x26c [drm]
 [<ffffffffa00a4ab7>] i915_pci_probe+0x1b/0x1d [i915]
 [<ffffffff81291bc7>] local_pci_probe+0x44/0x75
 [<ffffffff8129274a>] pci_device_probe+0xcd/0xfc
 [<ffffffff813397aa>] driver_probe_device+0xb5/0x150
 [<ffffffff813398a3>] __driver_attach+0x5e/0x81
 [<ffffffff81339845>] ? driver_probe_device+0x150/0x150
 [<ffffffff813389c2>] bus_for_each_dev+0x59/0x8f
 [<ffffffff8133945b>] driver_attach+0x1e/0x20
 [<ffffffff8133909c>] bus_add_driver+0xb0/0x206
 [<ffffffff81339d4a>] driver_register+0x98/0x105
 [<ffffffff8129301d>] __pci_register_driver+0x66/0xd1
 [<ffffffffa0026dd0>] drm_pci_init+0x8a/0xef [drm]
 [<ffffffffa00d0000>] ? 0xffffffffa00cffff
 [<ffffffffa00d008b>] i915_init+0x8b/0x8d [i915]
 [<ffffffff81002099>] do_one_initcall+0x7f/0x13a
 [<ffffffffa00d0000>] ? 0xffffffffa00cffff
 [<ffffffff8109c883>] sys_init_module+0x114/0x267
 [<ffffffff814ef542>] system_call_fastpath+0x16/0x1b
[drm:intel_panel_setup_backlight] *ERROR* Failed to register backlight: -17


             reply	other threads:[~2011-08-17 14:10 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-17 14:10 Dave Jones [this message]
2011-08-22 19:39 ` [PATCH] i915: do not setup intel_backlight twice Kamal Mostafa
2011-08-22 19:42   ` Matthew Garrett

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110817141010.GA21479@redhat.com \
    --to=davej@redhat.com \
    --cc=keithp@keithp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mjg@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.