From: Cyril Hrubis <metan.lists@gmail.com>
To: Daniel Mack <zonque@gmail.com>
Cc: ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: TASCAM US-122mkII
Date: Fri, 19 Aug 2011 13:37:28 +0200 [thread overview]
Message-ID: <20110819113727.GA9522@yumi> (raw)
In-Reply-To: <CACTFLANmONgmCtPKFpofJGQ72a5BSbZHkj5+e=yGfDrynDPrQA@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 592 bytes --]
Hi!
> > The good news is that I have 122mkII to play with, the bad news is that
> > it doesn't work with the snd_usb_122l driver.
>
> IIRC, the 122mkII implements an entirely different USB protocol
> compared to its former version. Can you send your "lsusb -v" output?
Attached.
As far as I understand it, there are two endpoints for audio and two for
MIDI. The MIDI part seems to be initalized fine although I don't have
any MIDI device to test it.
And in the log from windows machine the audio part does some
intialization and then only buch of isochronous transfers.
--
Cyril Hrubis
[-- Attachment #2: lsusb.txt --]
[-- Type: text/plain, Size: 4013 bytes --]
Bus 001 Device 005: ID 0644:8021 TEAC Corp. TASCAM US-122mkII
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0644 TEAC Corp.
idProduct 0x8021 TASCAM US-122mkII
bcdDevice 1.00
iManufacturer 1 TASCAM
iProduct 2 US-122 MKII
iSerial 3 no serial number
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 72
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 480mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x004e 1x 78 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x004e 1x 78 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
next prev parent reply other threads:[~2011-08-19 11:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-19 10:01 TASCAM US-122mkII Cyril Hrubis
2011-08-19 11:02 ` Daniel Mack
2011-08-19 11:37 ` Cyril Hrubis [this message]
2011-08-19 11:46 ` Daniel Mack
2011-08-19 11:54 ` Cyril Hrubis
2011-08-19 12:09 ` Cyril Hrubis
2011-08-19 13:06 ` Paul Menzel
2011-08-19 13:11 ` Cyril Hrubis
2011-08-26 14:52 ` Cyril Hrubis
2011-08-26 16:24 ` Cyril Hrubis
[not found] <BANLkTikBtN28qNwJf4nuTGL6jEGOw_jo6Q@mail.gmail.com>
2011-04-12 14:29 ` TASCAM US-122MKII Dominic Powell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110819113727.GA9522@yumi \
--to=metan.lists@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.