From: Rolf Eike Beer <eike-kernel@sf-tec.de>
To: "linux-parisc" <linux-parisc@vger.kernel.org>
Subject: Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7)
Date: Fri, 19 Aug 2011 19:58:30 +0200 [thread overview]
Message-ID: <201108191958.35802.eike-kernel@sf-tec.de> (raw)
[-- Attachment #1: Type: Text/Plain, Size: 15195 bytes --]
The last kernel I used on this machine was 2.6.38.4. Any hints appreciated.
Greetings,
Eike
Command line for kernel: 'root=/dev/sda3 console=ttyS0
palo_kernel=2/kernel-3.0.3'
Selected kernel: /kernel-3.0.3 from partition 2
ELF32 executable
Entry 00100100 first 00100000 n 3
Segment 0 load 00100000 size 4820992 mediaptr 0x1000
Segment 1 load 005c8000 size 116752 mediaptr 0x49a000
Segment 2 load 005e5000 size 27888 mediaptr 0x4b7000
Branching to kernel entry point 0x00100100. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
Linux version 3.0.3 (root@voyager) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0,
pie-0.4.5) ) #1 Fri Aug 19 14:48:59 CEST 2011
unwind_init: start = 0x10503000, end = 0x1053a640, entries = 14180
WARNING: Out of order unwind entry! 105041f0 and 10504200
WARNING: Out of order unwind entry! 10504200 and 10504210
WARNING: Out of order unwind entry! 10504cf0 and 10504d00
WARNING: Out of order unwind entry! 10504d00 and 10504d10
FP[0] enabled: Rev 1 Model 16
The 32-bit Kernel has started...
bootconsole [ttyB0] enabled
Initialized PDC Console for debugging.
Determining PDC firmware type: System Map.
model 00005cf0 00000481 00000000 00000002 77486b80 100000f0 00000008 000000b2
000000b2
vers 00000301
CPUID vers 17 rev 11 (0x0000022b)
capabilities 0x3
model 9000/785/C3600
Total Memory: 512 MB
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
(__)\ )\/\
U ||----w |
|| ||
swapper (pid 0): Protection id trap (code 7)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001110 Not tainted
r00-03 0004000e 0004000e 105caed8 00000000
r04-07 10544014 10544000 105401cc 1054daf4
r08-11 1054db10 10544020 10576800 000005ec
r12-15 00100000 00020000 10544000 10576af8
r16-19 00020000 105b7000 005ebfff 0000000e
r20-23 00000000 00000000 00000000 00000000
r24-27 00000001 00000000 00000000 10544000
r28-31 00000000 00000000 10540280 00000000
sr00-03 00000000 00000000 00000000 00000000
sr04-07 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: 1010047c 10100480
IIR: 43ffff40 ISR: 00000000 IOR: 00000000
CPU: 0 CR30: 10540000 CR31: ffffffff
ORIG_R28: 00000000
IAOQ[0]: .L21+0x0/0x8
IAOQ[1]: .L21+0x4/0x8
RP(r2): paging_init+0x7ac/0x848
Backtrace:
[<105caed8>] paging_init+0x7ac/0x848
[<105cb474>] setup_arch+0x5c/0x80
[<105c86ac>] start_kernel+0x80/0x374
[<1011497c>] start_parisc+0x4c/0x68
Backtrace:
[<10115050>] die_if_kernel+0xac/0x1bc
[<1011587c>] handle_interruption+0x47c/0x718
[<10104078>] intr_check_sig+0x0/0x34
[<10100480>] .L21+0x4/0x8
---[ end trace 139ce121c98e96c9 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
Backtrace:
[<1010fdec>] panic+0x90/0x23c
[<10135b28>] do_exit+0x5cc/0x640
[<1011508c>] die_if_kernel+0xe8/0x1bc
[<1011587c>] handle_interruption+0x47c/0x718
[<10104078>] intr_check_sig+0x0/0x34
[<10100480>] .L21+0x4/0x8
_______________________________
< Your System ate a SPARC! Gah! >
-------------------------------
\ ^__^
(__)\ )\/\
U ||----w |
|| ||
swapper (pid 0): Protection id trap (code 7)
die_if_kernel() recursion detected.
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next reply other threads:[~2011-08-19 17:58 UTC|newest] Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top 2011-08-19 17:58 Rolf Eike Beer [this message] 2011-08-31 9:54 ` Boot failure with 3.0.3: swapper (pid 0): Protection id trap (code 7) Rolf Eike Beer 2011-08-31 15:48 ` Kyle McMartin 2011-08-31 16:04 ` Kyle McMartin 2011-09-01 19:13 ` Rolf Eike Beer 2011-09-02 10:30 ` Rolf Eike Beer 2011-09-06 7:40 ` Rolf Eike Beer 2011-09-06 13:46 ` Kyle McMartin 2011-09-06 14:00 ` Kyle McMartin 2011-09-06 14:15 ` James Bottomley 2011-09-06 14:20 ` Kyle McMartin 2011-09-06 15:06 ` Rolf Eike Beer 2011-09-07 8:00 ` Rolf Eike Beer 2011-10-12 7:26 ` Rolf Eike Beer 2011-10-12 13:41 ` James Bottomley 2011-10-18 15:51 ` James Bottomley 2011-10-26 13:02 ` Rolf Eike Beer 2011-10-28 15:11 ` Jeroen Roovers 2011-09-06 14:41 ` John David Anglin 2011-09-06 15:06 ` Rolf Eike Beer 2011-09-04 1:46 ` John David Anglin 2011-09-04 16:35 ` Rolf Eike Beer 2011-09-04 17:59 ` John David Anglin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201108191958.35802.eike-kernel@sf-tec.de \
--to=eike-kernel@sf-tec.de \
--cc=linux-parisc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.