From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: pull request: wireless 2011-08-22
Date: Mon, 22 Aug 2011 15:01:37 -0400 [thread overview]
Message-ID: <20110822190136.GJ2534@tuxdriver.com> (raw)
Dave,
This is a batch of fixes intended for 3.1. Included is rewrite of an
earlier iwlagn fix that was revealed to be flawed (bad pointer access
during module unload), a fix for a memory leak, and a trio of rt2x00
fixes with detailed changelogs. These have all been in linux-next
for the last week with no reported complaints.
Please let me know if there are problems!
John
---
The following changes since commit fbe5e29ec1886967255e76946aaf537b8cc9b81e:
atm: br2684: Fix oops due to skb->dev being NULL (2011-08-20 14:13:05 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git for-davem
Emmanuel Grumbach (2):
Revert "iwlagn: sysfs couldn't find the priv pointer"
iwlagn: sysfs couldn't find the priv pointer
John W. Linville (1):
Merge branch 'master' of git://git.kernel.org/.../linville/wireless into for-davem
Julia Lawall (1):
drivers/net/wireless/wl12xx: add missing kfree
Stanislaw Gruszka (3):
rt2x00: fix crash in rt2800usb_write_tx_desc
rt2x00: fix order of entry flags modification
rt2x00: fix crash in rt2800usb_get_txwi
drivers/net/wireless/iwlwifi/iwl-pci.c | 25 ++++++++++---------------
drivers/net/wireless/rt2x00/rt2800usb.c | 20 +++++++++++++++-----
drivers/net/wireless/rt2x00/rt2x00usb.c | 17 +++++++----------
drivers/net/wireless/wl12xx/acx.c | 6 +-----
drivers/net/wireless/wl12xx/testmode.c | 5 ++++-
5 files changed, 37 insertions(+), 36 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c
index 69d4ec4..2fdbffa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-pci.c
+++ b/drivers/net/wireless/iwlwifi/iwl-pci.c
@@ -478,27 +478,22 @@ out_no_pci:
return err;
}
-static void iwl_pci_down(struct iwl_bus *bus)
-{
- struct iwl_pci_bus *pci_bus = (struct iwl_pci_bus *) bus->bus_specific;
-
- pci_disable_msi(pci_bus->pci_dev);
- pci_iounmap(pci_bus->pci_dev, pci_bus->hw_base);
- pci_release_regions(pci_bus->pci_dev);
- pci_disable_device(pci_bus->pci_dev);
- pci_set_drvdata(pci_bus->pci_dev, NULL);
-
- kfree(bus);
-}
-
static void __devexit iwl_pci_remove(struct pci_dev *pdev)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
- void *bus_specific = priv->bus->bus_specific;
+ struct iwl_bus *bus = priv->bus;
+ struct iwl_pci_bus *pci_bus = IWL_BUS_GET_PCI_BUS(bus);
+ struct pci_dev *pci_dev = IWL_BUS_GET_PCI_DEV(bus);
iwl_remove(priv);
- iwl_pci_down(bus_specific);
+ pci_disable_msi(pci_dev);
+ pci_iounmap(pci_dev, pci_bus->hw_base);
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+ pci_set_drvdata(pci_dev, NULL);
+
+ kfree(bus);
}
#ifdef CONFIG_PM
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 9395631..dbf501c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -464,6 +464,15 @@ static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg)
int wcid, ack, pid;
int tx_wcid, tx_ack, tx_pid;
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags)) {
+ WARNING(entry->queue->rt2x00dev,
+ "Data pending for entry %u in queue %u\n",
+ entry->entry_idx, entry->queue->qid);
+ cond_resched();
+ return false;
+ }
+
wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID);
ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED);
pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE);
@@ -529,12 +538,11 @@ static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev)
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
if (rt2800usb_txdone_entry_check(entry, reg))
break;
+ entry = NULL;
}
- if (!entry || rt2x00queue_empty(queue))
- break;
-
- rt2800_txdone_entry(entry, reg);
+ if (entry)
+ rt2800_txdone_entry(entry, reg);
}
}
@@ -558,8 +566,10 @@ static void rt2800usb_work_txdone(struct work_struct *work)
while (!rt2x00queue_empty(queue)) {
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
- if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+ !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
break;
+
if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE);
else if (rt2x00queue_status_timeout(entry))
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index b6b4542..7fbb55c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -262,23 +262,20 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+ if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
-
- if (rt2x00dev->ops->lib->tx_dma_done)
- rt2x00dev->ops->lib->tx_dma_done(entry);
-
- /*
- * Report the frame as DMA done
- */
- rt2x00lib_dmadone(entry);
-
/*
* Check if the frame was correctly uploaded
*/
if (urb->status)
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+ /*
+ * Report the frame as DMA done
+ */
+ rt2x00lib_dmadone(entry);
+ if (rt2x00dev->ops->lib->tx_dma_done)
+ rt2x00dev->ops->lib->tx_dma_done(entry);
/*
* Schedule the delayed work for reading the TX status
* from the device.
diff --git a/drivers/net/wireless/wl12xx/acx.c b/drivers/net/wireless/wl12xx/acx.c
index 7e33f1f..34f6ab5 100644
--- a/drivers/net/wireless/wl12xx/acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -77,8 +77,6 @@ int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth)
auth->sleep_auth = sleep_auth;
ret = wl1271_cmd_configure(wl, ACX_SLEEP_AUTH, auth, sizeof(*auth));
- if (ret < 0)
- return ret;
out:
kfree(auth);
@@ -624,10 +622,8 @@ int wl1271_acx_cca_threshold(struct wl1271 *wl)
ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD,
detection, sizeof(*detection));
- if (ret < 0) {
+ if (ret < 0)
wl1271_warning("failed to set cca threshold: %d", ret);
- return ret;
- }
out:
kfree(detection);
diff --git a/drivers/net/wireless/wl12xx/testmode.c b/drivers/net/wireless/wl12xx/testmode.c
index 5d5e1ef..88add68 100644
--- a/drivers/net/wireless/wl12xx/testmode.c
+++ b/drivers/net/wireless/wl12xx/testmode.c
@@ -139,12 +139,15 @@ static int wl1271_tm_cmd_interrogate(struct wl1271 *wl, struct nlattr *tb[])
if (ret < 0) {
wl1271_warning("testmode cmd interrogate failed: %d", ret);
+ kfree(cmd);
return ret;
}
skb = cfg80211_testmode_alloc_reply_skb(wl->hw->wiphy, sizeof(*cmd));
- if (!skb)
+ if (!skb) {
+ kfree(cmd);
return -ENOMEM;
+ }
NLA_PUT(skb, WL1271_TM_ATTR_DATA, sizeof(*cmd), cmd);
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2011-08-22 19:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-22 19:01 John W. Linville [this message]
2011-08-22 19:33 ` pull request: wireless 2011-08-22 David Miller
2011-08-25 3:33 ` Jeff Chua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110822190136.GJ2534@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.