From: Shaun Ruffell <sruffell@digium.com>
To: Larry Finger <Larry.Finger@lwfinger.net>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: Re: Lockdep warning
Date: Fri, 26 Aug 2011 15:18:23 -0500 [thread overview]
Message-ID: <20110826201823.GA3093@digium.com> (raw)
In-Reply-To: <4E57D7DD.5030902@lwfinger.net>
On Fri, Aug 26, 2011 at 12:29:01PM -0500, Larry Finger wrote:
> With a new version of the staging driver rtl8192e, I'm getting the
> lockdep warning posted below. The lock in question is for a timer
> that uses init_timer() for initialization. From the definition of
> that macro, I thought this was initialized with a lock_class_key
> that should prevent this warning. Obviously, I'm missing something.
>
> Any pointers would be appreciated.
>
> Thanks,
>
> Larry
>
>
> [ 88.048077] =============================================
> [ 88.048086] [ INFO: possible recursive locking detected ]
> [ 88.048093] 3.1.0-rc3-staging+ #5
> [ 88.048097] ---------------------------------------------
> [ 88.048102] kmemleak/631 is trying to acquire lock:
> [ 88.048108] (ptimer){+.-...}, at: [<ffffffff81059370>] del_timer_sync+0x0/0xc0
> [ 88.048124]
> [ 88.048125] but task is already holding lock:
> [ 88.048131] (ptimer){+.-...}, at: [<ffffffff81058e54>]
> run_timer_softirq+0x124/0x400
> [ 88.048142]
> [ 88.048143] other info that might help us debug this:
> [ 88.048149] Possible unsafe locking scenario:
> [ 88.048150]
> [ 88.048156] CPU0
> [ 88.048159] ----
> [ 88.048162] lock(ptimer);
> [ 88.048167] lock(ptimer);
> [ 88.048172]
> [ 88.048173] *** DEADLOCK ***
> [ 88.048174]
> [ 88.048179] May be due to missing lock nesting notation
> [ 88.048180]
> [ 88.048187] 2 locks held by kmemleak/631:
> [ 88.048191] #0: (scan_mutex){+.+...}, at: [<ffffffff81122e76>]
> kmemleak_scan_thread+0x56/0xd0
> [ 88.048206] #1: (ptimer){+.-...}, at: [<ffffffff81058e54>]
> run_timer_softirq+0x124/0x400
> [ 88.048218]
> [ 88.048219] stack backtrace:
> [ 88.048225] Pid: 631, comm: kmemleak Tainted: G C 3.1.0-rc3-staging+ #5
> [ 88.048232] Call Trace:
> [ 88.048236] <IRQ> [<ffffffff81083cbb>] __lock_acquire+0x119b/0x1ea0
> [ 88.048254] [<ffffffff81084fa5>] lock_acquire+0x95/0x120
> [ 88.048263] [<ffffffff81059370>] ? process_timeout+0x10/0x10
> [ 88.048272] [<ffffffff810593ac>] del_timer_sync+0x3c/0xc0
> [ 88.048280] [<ffffffff81059370>] ? process_timeout+0x10/0x10
> [ 88.048289] [<ffffffff81058e54>] ? run_timer_softirq+0x124/0x400
> [ 88.048316] [<ffffffffa008d1ee>] TsInitAddBA+0x6e/0x170 [r8192e_pci]
> [ 88.048332] [<ffffffffa008b4b3>] TsAddBaProcess+0x33/0x50 [r8192e_pci]
> [ 88.048341] [<ffffffff81058edb>] run_timer_softirq+0x1ab/0x400
> [ 88.048350] [<ffffffff81058e54>] ? run_timer_softirq+0x124/0x400
> [ 88.048364] [<ffffffffa008b480>] ? RxPktPendingTimeout+0x2d0/0x2d0 [r8192e_pci]
> [ 88.048377] [<ffffffff810502ad>] __do_softirq+0xbd/0x210
> [ 88.048386] [<ffffffff810714d7>] ? hrtimer_interrupt+0x137/0x240
> [ 88.048396] [<ffffffff8137176c>] call_softirq+0x1c/0x30
> [ 88.048406] [<ffffffff810048c5>] do_softirq+0x85/0xc0
> [ 88.048414] [<ffffffff81050686>] irq_exit+0x96/0xc0
> [ 88.048422] [<ffffffff8101e4e9>] smp_apic_timer_interrupt+0x69/0xa0
> [ 88.048431] [<ffffffff8136fff0>] apic_timer_interrupt+0x70/0x80
> [ 88.048438] <EOI> [<ffffffff8136ea4d>] ? _raw_spin_unlock_irqrestore+0x3d/0x70
> [ 88.048452] [<ffffffff81122315>] scan_gray_list+0x155/0x170
> [ 88.048460] [<ffffffff8112262b>] kmemleak_scan+0x2fb/0x6e0
> [ 88.048468] [<ffffffff81122330>] ? scan_gray_list+0x170/0x170
> [ 88.048477] [<ffffffff81122e20>] ? kmemleak_write+0x390/0x390
> [ 88.048485] [<ffffffff81122e20>] ? kmemleak_write+0x390/0x390
> [ 88.048494] [<ffffffff81122e7b>] kmemleak_scan_thread+0x5b/0xd0
> [ 88.048502] [<ffffffff81122e20>] ? kmemleak_write+0x390/0x390
> [ 88.048510] [<ffffffff8106c8e6>] kthread+0x96/0xa0
> [ 88.048519] [<ffffffff81371674>] kernel_thread_helper+0x4/0x10
> [ 88.048527] [<ffffffff8136ed9d>] ? retint_restore_args+0xe/0xe
> [ 88.048536] [<ffffffff8106c850>] ? __init_kthread_worker+0x70/0x70
> [ 88.048544] [<ffffffff81371670>] ? gs_change+0xb/0xb
It does not look like it's currently safe to call del_timer_sync in
softirq context [1].
[1] http://thread.gmane.org/gmane.linux.kernel/1097241/focus=1097476
--
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org
next prev parent reply other threads:[~2011-08-26 20:51 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-26 17:29 Lockdep warning Larry Finger
2011-08-26 20:18 ` Shaun Ruffell [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-12-19 13:36 Jonas Bonn
2013-12-19 14:02 ` Borislav Petkov
2013-12-19 14:04 ` Jonas Bonn
2013-12-19 14:14 ` Borislav Petkov
2008-03-06 12:14 Szekeres István
2008-02-22 10:40 lockdep warning Anders Eriksson
2008-02-22 11:16 ` Jiri Kosina
2008-02-22 13:16 ` Anders Eriksson
2008-02-22 13:20 ` Jiri Kosina
2008-02-22 16:32 ` Anders Eriksson
2008-02-22 17:01 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110826201823.GA3093@digium.com \
--to=sruffell@digium.com \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.