From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Tue, 30 Aug 2011 16:13:09 +0200
Subject: [U-Boot] Debugging u-boot
In-Reply-To: <857D4443-39B6-43B0-B269-BB6CE7C9AC4E@gmail.com>
References: <659ACFBD-2B5D-4F28-89BF-5473D90ADFA5@gmail.com>
	<20110830125529.B99D618C46FC@gemini.denx.de>
	<857D4443-39B6-43B0-B269-BB6CE7C9AC4E@gmail.com>
Message-ID: <20110830141309.29B5D18C46FC@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Mirko Banchi,

In message <857D4443-39B6-43B0-B269-BB6CE7C9AC4E@gmail.com> you wrote:
> 
> > Could you please explain which information you consider missing in
> > these sections of the manual?
> > 
> > 10.1. Debugging of U-Boot
> > 
> >    10.1.1. Debugging of U-Boot Before Relocation
> >    10.1.2. Debugging of U-Boot After Relocation
> 
> In those sections of the manual there is explained only how to specify
> the remote target for gdb and the steps for debugging when the BDI is
> already configured. From those documents i think is not clear how to
> configure the environment  for bdi. Maybe a note about the existence of
> Abatron manual could be useful. 

You mean you did not find the manual when unpacking your BDI3000?

Strange.


Sorry, but no, I don't think adding information on this level would be
appropriate here.  The DULG deals with U-Boot and Linux; configuration
of your JTAG debugger is a different topic which gets covered by the
manuals of your debugger's provider.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If I had to live my life again,  I'd  make  the  same  mistakes, only
sooner.                                          -- Tallulah Bankhead