From: Gustavo Padovan <padovan@profusion.mobi>
To: Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCHv1 1/5] Bluetooth: EWS: extended window size option support
Date: Wed, 14 Sep 2011 00:39:50 -0300 [thread overview]
Message-ID: <20110914033950.GL16856@joana> (raw)
In-Reply-To: <1315404314-12045-2-git-send-email-Andrei.Emeltchenko.news@gmail.com>
* Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com> [2011-09-07 17:05:10 +0300]:
> From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
>
> Adds support for EWS option. Code partly based on Qualcomm and Atheros
> patches sent upstream a year ago.
>
> Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
> ---
> include/net/bluetooth/l2cap.h | 11 +++++--
> net/bluetooth/l2cap_core.c | 62 +++++++++++++++++++++++++++++++++++++++--
> net/bluetooth/l2cap_sock.c | 10 +++---
> 3 files changed, 72 insertions(+), 11 deletions(-)
>
> diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
> index 1f26a39..92eac16 100644
> --- a/include/net/bluetooth/l2cap.h
> +++ b/include/net/bluetooth/l2cap.h
> @@ -31,7 +31,7 @@
> #define L2CAP_DEFAULT_MTU 672
> #define L2CAP_DEFAULT_MIN_MTU 48
> #define L2CAP_DEFAULT_FLUSH_TO 0xffff
> -#define L2CAP_DEFAULT_TX_WINDOW 63
> +#define L2CAP_DEFAULT_MAX_TX_WINDOW 63
> #define L2CAP_DEFAULT_MAX_TX 3
> #define L2CAP_DEFAULT_RETRANS_TO 2000 /* 2 seconds */
> #define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
> @@ -42,6 +42,8 @@
> #define L2CAP_DEFAULT_SDU_ARRIVAL_TIME 0xFFFFFFFF
> #define L2CAP_DEFAULT_ACCESS_LATENCY 0xFFFFFFFF
>
> +#define L2CAP_DEFAULT_MAX_EXT_WINDOW 0x3FFF
> +
> #define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
> #define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
>
> @@ -240,6 +242,7 @@ struct l2cap_conf_opt {
> #define L2CAP_CONF_RFC 0x04
> #define L2CAP_CONF_FCS 0x05
> #define L2CAP_CONF_EFS 0x06
> +#define L2CAP_CONF_EWS 0x07
>
> #define L2CAP_CONF_MAX_SIZE 22
>
> @@ -357,7 +360,7 @@ struct l2cap_chan {
>
> __u8 fcs;
>
> - __u8 tx_win;
> + __u16 tx_win;
> __u8 max_tx;
> __u16 retrans_timeout;
> __u16 monitor_timeout;
> @@ -381,7 +384,7 @@ struct l2cap_chan {
> struct sk_buff *sdu;
> struct sk_buff *sdu_last_frag;
>
> - __u8 remote_tx_win;
> + __u16 remote_tx_win;
> __u8 remote_max_tx;
> __u16 remote_mps;
>
> @@ -488,6 +491,7 @@ enum {
> CONF_STATE2_DEVICE,
> CONF_LOCAL_PEND,
> CONF_REMOTE_PEND,
> + CONF_EWS_RECV,
> };
>
> #define L2CAP_CONF_MAX_CONF_REQ 2
> @@ -508,6 +512,7 @@ enum {
> /* Definitions for flags in l2cap_chan */
> enum {
> FLAG_EFS_ENABLE,
> + FLAG_EXT_CTRL,
> };
>
> #define __set_chan_timer(c, t) l2cap_set_timer(c, &c->chan_timer, (t))
> diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
> index e0958de..81b8d02 100644
> --- a/net/bluetooth/l2cap_core.c
> +++ b/net/bluetooth/l2cap_core.c
> @@ -58,6 +58,7 @@
>
> int disable_ertm;
> int disable_flowspec = 1;
> +int disable_extwindow = 1;
>
> static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
> static u8 l2cap_fixed_chan[8] = { 0x02, };
> @@ -1909,6 +1910,28 @@ static inline bool __l2cap_efs_supported(struct l2cap_chan *chan)
> chan->conn->feat_mask & L2CAP_FEAT_EXT_FLOW;
> }
>
> +static inline bool __l2cap_ews_supported(struct l2cap_chan *chan)
> +{
> + return !disable_extwindow &&
> + chan->conn->feat_mask & L2CAP_FEAT_EXT_WINDOW;
> +}
> +
> +static inline void l2cap_txwin_setup(struct l2cap_chan *chan)
> +{
> + if (chan->tx_win > L2CAP_DEFAULT_MAX_TX_WINDOW &&
> + __l2cap_ews_supported(chan)) {
> + /* use extended control field */
> + set_bit(FLAG_EXT_CTRL, &chan->flags);
> + if (chan->tx_win > L2CAP_DEFAULT_MAX_EXT_WINDOW)
> + chan->tx_win = L2CAP_DEFAULT_MAX_EXT_WINDOW;
This check is already done on setsockopt.
> + } else {
> + if (chan->tx_win > L2CAP_DEFAULT_MAX_TX_WINDOW)
> + chan->tx_win = L2CAP_DEFAULT_MAX_TX_WINDOW;
> +
> + clear_bit(FLAG_EXT_CTRL, &chan->flags);
The flag is already cleared at this point.
> + }
> +}
> +
> static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data)
> {
> struct l2cap_conf_req *req = data;
> @@ -1960,7 +1983,6 @@ done:
>
> case L2CAP_MODE_ERTM:
> rfc.mode = L2CAP_MODE_ERTM;
> - rfc.txwin_size = chan->tx_win;
> rfc.max_transmit = chan->max_tx;
> rfc.retrans_timeout = 0;
> rfc.monitor_timeout = 0;
> @@ -1968,6 +1990,10 @@ done:
> if (L2CAP_DEFAULT_MAX_PDU_SIZE > chan->conn->mtu - 10)
> rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
>
> + l2cap_txwin_setup(chan);
> + rfc.txwin_size = chan->tx_win > L2CAP_DEFAULT_MAX_TX_WINDOW ?
> + L2CAP_DEFAULT_MAX_TX_WINDOW : chan->tx_win;
And this check is inside l2cap_txwin_setup()
> +
> l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
> (unsigned long) &rfc);
>
> @@ -1999,6 +2025,10 @@ done:
> l2cap_add_conf_opt(&ptr, L2CAP_CONF_FCS, 1, chan->fcs);
> }
>
> + if (__l2cap_ews_supported(chan) &&
> + test_bit(FLAG_EXT_CTRL, &chan->flags))
> + l2cap_add_conf_opt(&ptr, L2CAP_CONF_EWS, 2,
> + chan->tx_win);
Fix your indentation:
l2cap_add_conf_opt(&ptr, L2CAP_CONF_EWS, 2,
chan->tx_win);
There should be more wrong indentations on your code, please check.
Gustavo
next prev parent reply other threads:[~2011-09-14 3:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-07 14:05 [PATCHv1 0/5] EWS: extended window size and extended control field support Emeltchenko Andrei
2011-09-07 14:05 ` [PATCHv1 1/5] Bluetooth: EWS: extended window size option support Emeltchenko Andrei
2011-09-14 3:39 ` Gustavo Padovan [this message]
2011-09-07 14:05 ` [PATCHv1 2/5] Bluetooth: EWS: l2cap extended control field support Emeltchenko Andrei
2011-09-14 2:48 ` Gustavo Padovan
2011-09-07 14:05 ` [PATCHv1 3/5] Bluetooth: EWS: support extended seq numbers Emeltchenko Andrei
2011-09-14 3:43 ` Gustavo Padovan
2011-09-07 14:05 ` [PATCHv1 4/5] Bluetooth: EWS: remove magic numbers in l2cap Emeltchenko Andrei
2011-09-07 14:05 ` [PATCHv1 5/5] Bluetooth: EWS: prevent unneeded fragmentation " Emeltchenko Andrei
2011-09-14 3:51 ` Gustavo Padovan
2011-09-16 11:43 ` Emeltchenko Andrei
2011-09-19 17:13 ` Gustavo Padovan
2011-09-20 6:28 ` Emeltchenko Andrei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110914033950.GL16856@joana \
--to=padovan@profusion.mobi \
--cc=Andrei.Emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.