From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Sat, 24 Sep 2011 03:50:22 +0000 Subject: Re: [lm-sensors] AMD Phenom II Family 16h Message-Id: <20110924035022.GA19653@ericsson.com> List-Id: References: <201109232108.25627.pablow.1422@gmail.com> In-Reply-To: <201109232108.25627.pablow.1422@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On Fri, Sep 23, 2011 at 08:06:19PM -0400, Pablo Fabian Wagner Boian wrote: > Hi everyone. > I've got a question regarding AMD Phenom II Family 16h. I'm using the k10= temp=20 > which appear to be the lastest (the stand alone one, downloaded from lm- > sensors.org), and it gives me a temp not matching the real (about -10=BAC= diff=20 > between them). And, should it provides me a temp reading for all cores? (= 6 in=20 > my case), because I got only one. >=20 I can not comment on the accuracy, but the k10temp module reads the tempera= ture from the northbridge, and there is only one no matter how many cores your c= hip has. I guess the chip only reports the package temperature, not the per-core tem= perature. Having said that ... the driver officially only supports up to family 15h a= s far as I can see. Did you patch it, or does it just work ? Thanks, Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors