From: Wakko Warner <wakko@animx.eu.org>
To: linux-scsi@vger.kernel.org
Subject: Re: mpt2sas errors help
Date: Sat, 24 Sep 2011 08:16:55 -0400 [thread overview]
Message-ID: <20110924121655.GA9344@animx.eu.org> (raw)
In-Reply-To: <20110921234535.GA1972@animx.eu.org>
Wakko Warner wrote:
> I'm seeing tons of these ever 2-4 minutes during a raid rebuild (new raid on
> new disks)
>
> These are 2tb seagate green 5900 sata disks. I have an external enclosure
> attached to an lsi 6gb sas controller.
>
> This happens on ID 0:0:5:0 (first disk, sdd phy-4, in the enclosure) and on
> ID 0:0:8:0 (4th disk, sdg phy-7, in the enclosure). I have not seen it on
> 0:0:6:0 (sde phy-5) or 0:0:7:0 (sdf phy-6). The cable is an sff8088 to
> sff8088. The sas controller has an sff8088 connector.
>
> I assume the link on these devices are 6.0gb.
>
> Can someone tell me what is happening?
Noone?
> Here's the dmesg:
> [6938625.516581] sd 0:0:8:0: attempting task abort! scmd(ffff8802ede2fc80)
> [6938625.516588] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 cf 90 00 00 30 00
> [6938625.516603] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.516608] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.662796] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802ede2fc80)
> [6938625.825901] sd 0:0:8:0: attempting task abort! scmd(ffff880236f4adc0)
> [6938625.825907] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 cf c0 00 00 30 00
> [6938625.825922] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.825927] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.825941] sd 0:0:8:0: task abort: SUCCESS scmd(ffff880236f4adc0)
> [6938625.826200] sd 0:0:8:0: attempting task abort! scmd(ffff8802a485dbc0)
> [6938625.826206] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 cf f0 00 00 30 00
> [6938625.826220] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.826225] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.826237] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802a485dbc0)
> [6938625.826444] sd 0:0:8:0: attempting task abort! scmd(ffff88031c3376c0)
> [6938625.826448] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d0 20 00 00 98 00
> [6938625.826461] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.826465] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.826477] sd 0:0:8:0: task abort: SUCCESS scmd(ffff88031c3376c0)
> [6938625.826677] sd 0:0:8:0: attempting task abort! scmd(ffff8800197a58c0)
> [6938625.826681] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d0 b8 00 00 10 00
> [6938625.826694] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.826698] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.826710] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8800197a58c0)
> [6938625.826891] sd 0:0:8:0: attempting task abort! scmd(ffff8802a53b7d80)
> [6938625.826896] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d0 c8 00 00 08 00
> [6938625.826908] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.826912] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.826924] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802a53b7d80)
> [6938625.827098] sd 0:0:8:0: attempting task abort! scmd(ffff8800197a57c0)
> [6938625.827103] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d0 d0 00 00 30 00
> [6938625.827115] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.827119] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.827130] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8800197a57c0)
> [6938625.827363] sd 0:0:8:0: attempting task abort! scmd(ffff8800abde5480)
> [6938625.827369] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 00 00 00 20 00
> [6938625.827383] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.827388] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.827400] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8800abde5480)
> [6938625.827584] sd 0:0:8:0: attempting task abort! scmd(ffff8800abde5080)
> [6938625.827589] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 20 00 00 88 00
> [6938625.827602] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.827606] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.827618] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8800abde5080)
> [6938625.827793] sd 0:0:8:0: attempting task abort! scmd(ffff8801d2c77580)
> [6938625.827797] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 a8 00 00 08 00
> [6938625.827809] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.827814] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.827825] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8801d2c77580)
> [6938625.828013] sd 0:0:8:0: attempting task abort! scmd(ffff880130f50d80)
> [6938625.828018] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 b0 00 00 08 00
> [6938625.828030] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.828034] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.828046] sd 0:0:8:0: task abort: SUCCESS scmd(ffff880130f50d80)
> [6938625.828231] sd 0:0:8:0: attempting task abort! scmd(ffff88031ad6b080)
> [6938625.828236] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 b8 00 00 08 00
> [6938625.828248] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.828252] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.828264] sd 0:0:8:0: task abort: SUCCESS scmd(ffff88031ad6b080)
> [6938625.828483] sd 0:0:8:0: attempting task abort! scmd(ffff880130f9d5c0)
> [6938625.828488] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 c0 00 00 08 00
> [6938625.828516] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.828521] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.828533] sd 0:0:8:0: task abort: SUCCESS scmd(ffff880130f9d5c0)
> [6938625.828691] sd 0:0:8:0: attempting task abort! scmd(ffff88011ea9da80)
> [6938625.828695] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 c8 00 00 08 00
> [6938625.828712] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.828715] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.828724] sd 0:0:8:0: task abort: SUCCESS scmd(ffff88011ea9da80)
> [6938625.828917] sd 0:0:8:0: attempting task abort! scmd(ffff8801c41ed1c0)
> [6938625.828920] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d1 d0 00 00 98 00
> [6938625.828928] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.828930] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.828938] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8801c41ed1c0)
> [6938625.829119] sd 0:0:8:0: attempting task abort! scmd(ffff8800abde5e80)
> [6938625.829122] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d2 68 00 00 60 00
> [6938625.829129] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.829131] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.829139] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8800abde5e80)
> [6938625.829328] sd 0:0:8:0: attempting task abort! scmd(ffff880143bd52c0)
> [6938625.829331] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d2 c8 00 00 f8 00
> [6938625.829338] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.829340] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.829347] sd 0:0:8:0: task abort: SUCCESS scmd(ffff880143bd52c0)
> [6938625.829534] sd 0:0:8:0: attempting task abort! scmd(ffff8800704db480)
> [6938625.829536] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d3 c0 00 00 50 00
> [6938625.829543] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.829546] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.829553] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8800704db480)
> [6938625.829737] sd 0:0:8:0: attempting task abort! scmd(ffff8802e82ce8c0)
> [6938625.829740] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d4 10 00 00 60 00
> [6938625.829747] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.829749] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.829756] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802e82ce8c0)
> [6938625.829940] sd 0:0:8:0: attempting task abort! scmd(ffff8802a53b7480)
> [6938625.829943] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d4 70 00 00 38 00
> [6938625.829950] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.829952] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.829959] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802a53b7480)
> [6938625.830141] sd 0:0:8:0: attempting task abort! scmd(ffff88011ba0a4c0)
> [6938625.830144] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d4 a8 00 00 60 00
> [6938625.830151] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.830153] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.830161] sd 0:0:8:0: task abort: SUCCESS scmd(ffff88011ba0a4c0)
> [6938625.830345] sd 0:0:8:0: attempting task abort! scmd(ffff8802ede2e5c0)
> [6938625.830347] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d5 08 00 00 d0 00
> [6938625.830354] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.830357] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.830364] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802ede2e5c0)
> [6938625.830542] sd 0:0:8:0: attempting task abort! scmd(ffff8802ede2f080)
> [6938625.830545] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d5 d8 00 00 b0 00
> [6938625.830551] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.830554] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.830562] sd 0:0:8:0: task abort: SUCCESS scmd(ffff8802ede2f080)
> [6938625.830739] sd 0:0:8:0: attempting task abort! scmd(ffff88011bbc4180)
> [6938625.830742] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d6 88 00 00 30 00
> [6938625.830748] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.830751] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.830758] sd 0:0:8:0: task abort: SUCCESS scmd(ffff88011bbc4180)
> [6938625.830948] sd 0:0:8:0: attempting task abort! scmd(ffff88031c2405c0)
> [6938625.830951] sd 0:0:8:0: [sdg] CDB: cdb[0]=0x2a: 2a 00 2c 05 d6 b8 00 00 28 00
> [6938625.830958] scsi target0:0:8: handle(0x000f), sas_address(0x4433221103000000), phy(3)
> [6938625.830960] scsi target0:0:8: enclosure_logical_id(0x500605b001d0ab00), slot(3)
> [6938625.830967] sd 0:0:8:0: task abort: SUCCESS scmd(ffff88031c2405c0)
> [6938626.380240] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380248] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380253] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380258] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380263] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380267] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380272] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380276] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380281] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380286] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380290] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380295] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380299] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380304] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380318] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380323] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380346] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380351] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380356] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380360] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380374] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380379] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380392] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380397] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380412] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380417] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.380425] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480517] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480525] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480530] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480544] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480548] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480562] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480566] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480580] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480595] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480598] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480609] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480619] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480630] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480640] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480643] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480654] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480665] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480676] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480688] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480691] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480702] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480713] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480724] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480727] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480739] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480750] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.480761] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524233] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524240] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524245] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524250] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524255] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524259] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524264] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524268] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524273] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524278] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524282] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524287] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524301] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524305] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524318] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524323] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524347] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524352] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524357] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524362] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524375] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524380] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524394] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524398] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524412] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524418] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.524423] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612152] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612159] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612164] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612169] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612174] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612178] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612183] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612197] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612202] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612215] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612228] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612233] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612246] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612251] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612265] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612269] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612285] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612287] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612299] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612310] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612321] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612336] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612340] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612350] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612361] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612364] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> [6938626.612375] mpt2sas0: log_info(0x31110e00): originator(PL), code(0x11), sub_code(0x0e00)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Microsoft has beaten Volkswagen's world record. Volkswagen only created 22
million bugs.
next prev parent reply other threads:[~2011-09-24 12:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-21 23:45 mpt2sas errors help Wakko Warner
2011-09-24 12:16 ` Wakko Warner [this message]
[not found] <7863850E8C98C748980632D9D3B7C1990A275C6AA6@inbmail02.lsi.com>
2011-09-27 9:04 ` Nandigama, Nagalakshmi
2011-09-27 10:56 ` Wakko Warner
2011-09-27 12:12 ` Nandigama, Nagalakshmi
2011-09-27 23:19 ` Wakko Warner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110924121655.GA9344@animx.eu.org \
--to=wakko@animx.eu.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.