From: "Arkadiusz Miśkiewicz" <a.miskiewicz@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: tpmdd-devel@lists.sourceforge.net,
Debora Velarde <debora@linux.vnet.ibm.com>,
Rajiv Andrade <srajiv@linux.vnet.ibm.com>,
Marcel Selhorst <m.selhorst@sirrix.com>
Subject: Re: 3.1.0-rc5-00039-g79016f6: suspends to ram and resumes immediately [ 3.1.0-rc7-00041-gb172e38, too]
Date: Sat, 24 Sep 2011 23:46:21 +0200 [thread overview]
Message-ID: <201109242346.21882.a.miskiewicz@gmail.com> (raw)
In-Reply-To: <201109101037.11507.a.miskiewicz@gmail.com>
On Saturday 10 of September 2011, Arkadiusz Miśkiewicz wrote:
> For some time (not sure when it started) sometimes when trying
> to suspend to ram it starts suspending and immediately resumes.
> Then I make second try and it suspends permamently.
>
> Sometimes it suspends fine at first try. Sometimes only at second
> try. Never had to retry more than once.
>
> 3.1.0-rc5-00039-g79016f6
>
> dmesg from suspend which resummed immediately - no idea why
3.1.0-rc7-00041-gb172e38 isn't any better:
[32755.040994] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[32755.040996] PM: Device 00:0a failed to resume: error -19
so which device is that? Second try succeeds.
Googling gives some hints about itpm option for tpm_tis... while trying to
rmmod/modprobe it I got problem below. Anyway that shouldn't be itpm issue
since:
[ 7.088318] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 7.088320] tpm_tis 00:0a: Intel iTPM workaround enabled
so it is enabled already.
[33272.625173] BUG: scheduling while atomic: rmmod/12735/0x00000002
[33272.625179] Modules linked in: xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack iptable_filter ip_tables x_tables tun rfcomm bnep
sch_sfq ipv6 ext2 mbcache md_mod acpi_cpufreq mperf ecb btusb bluetooth crc16
hid_logitech_dj usbhid hid cdc_ether usbnet mii cdc_acm cdc_wdm joydev
uvcvideo videodev v4l2_compat_ioctl32 media snd_hda_codec_conexant arc4 pcmcia
sr_mod thinkpad_acpi uhci_hcd cdrom sg nvram battery ac tpm_tis(-) tpm
tpm_bios iwlagn wmi mac80211 firewire_ohci sdhci_pci sdhci evdev yenta_socket
thermal firewire_core mmc_core pcmcia_rsrc psmouse crc_itu_t serio_raw
pcmcia_core cfg80211 rfkill processor snd_hda_intel snd_hda_codec i2c_i801
snd_hwdep snd_pcm e1000e pcspkr iTCO_wdt ehci_hcd snd_timer
iTCO_vendor_support snd usbcore soundcore snd_page_alloc xfs sd_mod crc_t10dif
cbc cryptd aes_x86_64 aes_generic dm_crypt dm_mod ahci libahci libata scsi_mod
[last unloaded: scsi_wait_scan]
[33272.625350] Pid: 12735, comm: rmmod Not tainted 3.1.0-rc7-00041-gb172e38-
dirty #109
[33272.625356] Call Trace:
[33272.625371] [<ffffffff814070df>] __schedule_bug+0x55/0x5a
[33272.625380] [<ffffffff8140c68d>] __schedule+0xa2/0x9b7
[33272.625392] [<ffffffff8102ab35>] ? finish_task_switch+0x50/0xb8
[33272.625400] [<ffffffff8140cf00>] ? __schedule+0x915/0x9b7
[33272.625409] [<ffffffff81032c65>] ? ttwu_do_wakeup+0x81/0xf7
[33272.625422] [<ffffffff810344eb>] schedule+0x55/0x57
[33272.625425] [<ffffffff8140d3e4>] schedule_timeout+0x28/0x29a
[33272.625427] [<ffffffff8140c42f>] ? wait_for_common+0x12f/0x141
[33272.625430] [<ffffffff8140c3c3>] wait_for_common+0xc3/0x141
[33272.625433] [<ffffffff81033dbf>] ? try_to_wake_up+0x250/0x250
[33272.625435] [<ffffffff8140c459>] wait_for_completion+0x18/0x1a
[33272.625439] [<ffffffff8108bd5f>] synchronize_rcu+0x49/0x4b
[33272.625443] [<ffffffff810529b4>] ? find_ge_pid+0x3d/0x3d
[33272.625448] [<ffffffffa0271187>] tpm_remove_hardware+0x6d/0xa3 [tpm]
[33272.625454] [<ffffffffa02dc2b1>] cleanup_tis+0x3f/0xd8e [tpm_tis]
[33272.625458] [<ffffffff8106a779>] sys_delete_module+0x1bf/0x21f
[33272.625462] [<ffffffff81082d27>] ? audit_syscall_entry+0x179/0x1a5
[33272.625466] [<ffffffff8140f7fb>] system_call_fastpath+0x16/0x1b
[33272.636109] BUG: scheduling while atomic: rmmod/12735/0x00000002
[33272.636112] Modules linked in: xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4
xt_state nf_conntrack iptable_filter ip_tables x_tables tun rfcomm bnep
sch_sfq ipv6 ext2 mbcache md_mod acpi_cpufreq mperf ecb btusb bluetooth crc16
hid_logitech_dj usbhid hid cdc_ether usbnet mii cdc_acm cdc_wdm joydev
uvcvideo videodev v4l2_compat_ioctl32 media snd_hda_codec_conexant arc4 pcmcia
sr_mod thinkpad_acpi uhci_hcd cdrom sg nvram battery ac tpm_tis(-) tpm
tpm_bios iwlagn wmi mac80211 firewire_ohci sdhci_pci sdhci evdev yenta_socket
thermal firewire_core mmc_core pcmcia_rsrc psmouse crc_itu_t serio_raw
pcmcia_core cfg80211 rfkill processor snd_hda_intel snd_hda_codec i2c_i801
snd_hwdep snd_pcm e1000e pcspkr iTCO_wdt ehci_hcd snd_timer
iTCO_vendor_support snd usbcore soundcore snd_page_alloc xfs sd_mod crc_t10dif
cbc cryptd aes_x86_64 aes_generic dm_crypt dm_mod ahci libahci libata scsi_mod
[last unloaded: scsi_wait_scan]
[33272.636251] Pid: 12735, comm: rmmod Not tainted 3.1.0-rc7-00041-gb172e38-
dirty #109
[33272.636256] Call Trace:
[33272.636270] [<ffffffff814070df>] __schedule_bug+0x55/0x5a
[33272.636279] [<ffffffff8140c68d>] __schedule+0xa2/0x9b7
[33272.636290] [<ffffffff8102ab35>] ? finish_task_switch+0x50/0xb8
[33272.636299] [<ffffffff81409e5d>] ? __slab_free+0x28a/0x32b
[33272.636307] [<ffffffff8140cf00>] ? __schedule+0x915/0x9b7
[33272.636316] [<ffffffff810344eb>] schedule+0x55/0x57
[33272.636324] [<ffffffff8140d3e4>] schedule_timeout+0x28/0x29a
[33272.636333] [<ffffffff8140c3c3>] wait_for_common+0xc3/0x141
[33272.636342] [<ffffffff81033dbf>] ? try_to_wake_up+0x250/0x250
[33272.636350] [<ffffffff8140c459>] wait_for_completion+0x18/0x1a
[33272.636360] [<ffffffff8133be34>] devtmpfs_delete_node+0xa2/0xb7
[33272.636371] [<ffffffff81335a99>] device_del+0x69/0x180
[33272.636379] [<ffffffff81335bf3>] device_unregister+0x43/0x4f
[33272.636388] [<ffffffff81335c35>] device_destroy+0x36/0x3d
[33272.636398] [<ffffffff8121155b>] misc_deregister+0x86/0xa6
[33272.636413] [<ffffffffa0271193>] tpm_remove_hardware+0x79/0xa3 [tpm]
[33272.636428] [<ffffffffa02dc2b1>] cleanup_tis+0x3f/0xd8e [tpm_tis]
[33272.636440] [<ffffffff8106a779>] sys_delete_module+0x1bf/0x21f
[33272.636449] [<ffffffff81082d27>] ? audit_syscall_entry+0x179/0x1a5
[33272.636460] [<ffffffff8140f7fb>] system_call_fastpath+0x16/0x1b
[33275.324080] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6)
[33275.324083] tpm_tis 00:0a: Intel iTPM workaround enabled
and here is a log from first try to suspend (before tpm testing):
[32752.666270] PM: Syncing filesystems ... done.
[32753.448253] Freezing user space processes ... (elapsed 0.01 seconds) done.
[32753.464085] Freezing remaining freezable tasks ... (elapsed 0.01 seconds)
done.
[32753.480164] Suspending console(s) (use no_console_suspend to debug)
[32753.496076] e1000e 0000:00:19.0: BAR 0: set to [mem 0xfc000000-0xfc01ffff]
(PCI address [0xfc000000-0xfc01ffff])
[32753.496084] e1000e 0000:00:19.0: BAR 1: set to [mem 0xfc025000-0xfc025fff]
(PCI address [0xfc025000-0xfc025fff])
[32753.496092] e1000e 0000:00:19.0: BAR 2: set to [io 0x1840-0x185f] (PCI
address [0x1840-0x185f])
[32753.496138] e1000e 0000:00:19.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[32753.496164] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100107)
[32753.496198] e1000e 0000:00:19.0: PME# disabled
[32753.496280] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[32753.753940] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[32753.754011] sd 0:0:0:0: [sda] Stopping disk
[32753.837289] ACPI handle has no context!
[32753.837309] sdhci-pci 0000:15:00.2: PCI INT C disabled
[32753.837321] ACPI handle has no context!
[32753.837407] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[32753.837426] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[32753.837444] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[32753.837460] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[32753.837627] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[32753.837646] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[32753.837668] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[32753.837684] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[32753.844089] ACPI handle has no context!
[32753.852093] i915 0000:00:02.0: power state changed by ACPI to D3
[32753.940381] snd_hda_intel 0000:00:1b.0: PCI INT B disabled
[32753.956089] PM: suspend of devices complete after 362.621 msecs
[32753.988047] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[32753.988200] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[32754.004045] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
[32754.004109] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3
[32754.024045] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[32754.024174] PM: late suspend of devices complete after 68.075 msecs
[32754.026241] ACPI: Preparing to enter system sleep state S3
[32754.184091] PM: Saving platform NVS memory
[32754.194456] Disabling non-boot CPUs ...
[32754.194883] Broke affinity for irq 9
[32754.194894] Broke affinity for irq 12
[32754.194913] Broke affinity for irq 17
[32754.296043] CPU 1 is now offline
[32754.296921] Extended CMOS year: 2000
[32754.296921] ACPI: Low-level resume complete
[32754.296921] PM: Restoring platform NVS memory
[32754.296921] Extended CMOS year: 2000
[32754.296921] Enabling non-boot CPUs ...
[32754.305098] Booting Node 0 Processor 1 APIC 0x1
[32754.305099] smpboot cpu 1: start_ip = 99000
[32754.195998] Calibrating delay loop (skipped) already calibrated this CPU
[32754.195998] Disabled fast string operations
[32754.320119] Switched to NOHz mode on CPU #1
[32754.352561] CPU1 is up
[32754.354423] ACPI: Waking up from system sleep state S3
[32754.960228] i915 0000:00:02.0: restoring config space at offset 0x1 (was
0x900007, writing 0x900407)
[32754.960287] pci 0000:00:02.1: restoring config space at offset 0x1 (was
0x900000, writing 0x900007)
[32754.960313] pci 0000:00:03.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[32754.960339] pci 0000:00:03.0: restoring config space at offset 0x1 (was
0x100006, writing 0x180006)
[32754.988044] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32754.988054] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32754.988101] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[32754.988125] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32754.988132] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32754.988181] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[32754.988207] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32754.988214] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32754.988260] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[32754.988281] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32754.988288] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32754.988347] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[32754.988379] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[32754.988389] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[32754.988451] snd_hda_intel 0000:00:1b.0: restoring config space at offset
0x1 (was 0x100106, writing 0x100102)
[32754.988515] pcieport 0000:00:1c.0: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc051c041)
[32754.988527] pcieport 0000:00:1c.0: restoring config space at offset 0x8
(was 0xfff0, writing 0xc030c020)
[32754.988538] pcieport 0000:00:1c.0: restoring config space at offset 0x7
(was 0xf0, writing 0x9090)
[32754.988560] pcieport 0000:00:1c.0: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[32754.988652] pcieport 0000:00:1c.1: restoring config space at offset 0x9
(was 0x1fff1, writing 0xc011c001)
[32754.988665] pcieport 0000:00:1c.1: restoring config space at offset 0x7
(was 0x200000f0, writing 0x8080)
[32754.988687] pcieport 0000:00:1c.1: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[32754.988794] pcieport 0000:00:1c.3: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[32754.988900] pcieport 0000:00:1c.4: restoring config space at offset 0x1
(was 0x100107, writing 0x100507)
[32754.988960] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32754.988968] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32754.989014] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[32754.989035] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32754.989042] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32754.989091] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[32754.989154] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1
(was 0x2900005, writing 0x2900001)
[32754.989227] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1
(was 0x2900106, writing 0x2900102)
[32754.989259] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[32754.989268] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[32754.989449] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00007, writing 0x2b00407)
[32755.004054] firewire_ohci 0000:15:00.1: BAR 0: set to [mem
0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff])
[32755.004107] firewire_ohci 0000:15:00.1: restoring config space at offset
0x3 (was 0x800000, writing 0x802010)
[32755.004122] firewire_ohci 0000:15:00.1: restoring config space at offset
0x1 (was 0x2100000, writing 0x2100106)
[32755.020048] sdhci-pci 0000:15:00.2: BAR 0: set to [mem
0xf4801800-0xf48018ff] (PCI address [0xf4801800-0xf48018ff])
[32755.020100] sdhci-pci 0000:15:00.2: restoring config space at offset 0x3
(was 0x800000, writing 0x802010)
[32755.020115] sdhci-pci 0000:15:00.2: restoring config space at offset 0x1
(was 0x2100000, writing 0x2100106)
[32755.021112] PM: early resume of devices complete after 61.034 msecs
[32755.021301] i915 0000:00:02.0: power state changed by ACPI to D0
[32755.021314] i915 0000:00:02.0: power state changed by ACPI to D0
[32755.021333] i915 0000:00:02.0: setting latency timer to 64
[32755.021409] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[32755.023684] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32755.023692] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[32755.023708] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ
20
[32755.023721] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[32755.023758] usb usb3: root hub lost power or was reset
[32755.023784] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ
21
[32755.023796] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[32755.023830] usb usb4: root hub lost power or was reset
[32755.023850] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32755.023857] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[32755.023867] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ
22
[32755.023879] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[32755.023913] usb usb5: root hub lost power or was reset
[32755.023934] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[32755.023944] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[32755.023957] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ
23
[32755.023969] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[32755.024100] snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[32755.024113] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[32755.024176] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[32755.024340] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32755.024348] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[32755.024360] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[32755.024372] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[32755.024407] usb usb6: root hub lost power or was reset
[32755.024440] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[32755.024452] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[32755.024487] usb usb7: root hub lost power or was reset
[32755.024516] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[32755.024528] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[32755.024564] usb usb8: root hub lost power or was reset
[32755.024593] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[32755.024603] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[32755.024616] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ
19
[32755.024628] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[32755.024743] pci 0000:00:1e.0: setting latency timer to 64
[32755.024783] ahci 0000:00:1f.2: setting latency timer to 64
[32755.025383] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ
18
[32755.025391] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW
doesn't fully claim to support it.
[32755.026471] sd 0:0:0:0: [sda] Starting disk
[32755.040994] legacy_resume(): pnp_bus_resume+0x0/0x67 returns -19
[32755.040996] PM: Device 00:0a failed to resume: error -19
[32755.090456] firewire_core: skipped bus generations, destroying all nodes
[32755.151223] Extended CMOS year: 2000
[32755.344095] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[32755.344139] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32755.346965] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[32755.348084] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[32755.348094] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[32755.352577] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[32755.353679] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[32755.353688] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[32755.354835] ata2.00: configured for UDMA/100
[32755.388131] usb 1-6: reset high speed USB device number 4 using ehci_hcd
[32755.588161] firewire_core: rediscovered device fw0
[32755.600923] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[32755.600933] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[32755.600942] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[32755.632138] usb 4-2: reset full speed USB device number 2 using uhci_hcd
[32755.743029] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[32755.743039] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[32755.743048] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered
out
[32755.776358] btusb 4-2:1.0: no reset_resume for driver btusb?
[32755.776365] btusb 4-2:1.1: no reset_resume for driver btusb?
[32755.803032] ata1.00: configured for UDMA/133
[32755.991395] thinkpad_acpi: restoring fan level to 0x07
[32755.991680] iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S
[32755.994676] iwlagn 0000:03:00.0: Radio type=0x0-0x1-0x0
[32756.048470] PM: resume of devices complete after 1027.241 msecs
[32756.049724] Restarting tasks ...
[32756.049941] usb 2-4: USB disconnect, device number 2
[32756.051617] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether'
usb-0000:00:1d.7-4, Mobile Broadband Network Device
[32756.067371] usb 3-1: USB disconnect, device number 3
[32756.068297] done.
[32756.068306] video LNXVIDEO:00: Restoring backlight state
[32756.480061] usb 3-1: new full speed USB device number 4 using uhci_hcd
[32756.670681] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[32756.670684] usb 3-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[32756.670686] usb 3-1: Product: USB Receiver
[32756.670688] usb 3-1: Manufacturer: Logitech
[32756.683019] logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw0: USB
HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input2
[32756.688067] input: Logitech Unifying Device. Wireless PID:1028 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.2/0003:046D:C52B.000B/input/input16
[32756.688608] logitech-djdevice 0003:046D:C52B.000C: input,hidraw1: USB HID
v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on
usb-0000:00:1a.0-1:1
[32757.144554] e1000e 0000:00:19.0: PME# enabled
[32760.060117] usb 2-4: new high speed USB device number 3 using ehci_hcd
[32760.977968] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[32760.977977] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[32760.977984] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard
Composite Device
[32760.977991] usb 2-4: Manufacturer: Ericsson
[32760.977996] usb 2-4: SerialNumber: 3541430228088360
[32761.002694] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[32761.027856] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[32761.047831] cdc_wdm 2-4:1.5: cdc-wdm-175: USB WDM device
[32761.061310] cdc_wdm 2-4:1.6: cdc-wdm-174: USB WDM device
[32761.081401] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at
usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[32761.131203] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[32770.296774] iwlagn 0000:03:00.0: Tx aggregation enabled on ra =
e0:46:9a:4e:93:25 tid = 0
--
Arkadiusz Miśkiewicz PLD/Linux Team
arekm / maven.pl http://ftp.pld-linux.org/
prev parent reply other threads:[~2011-09-24 21:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-10 8:37 3.1.0-rc5-00039-g79016f6: suspends to ram and resumes immediately Arkadiusz Miśkiewicz
2011-09-24 21:46 ` Arkadiusz Miśkiewicz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201109242346.21882.a.miskiewicz@gmail.com \
--to=a.miskiewicz@gmail.com \
--cc=debora@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.selhorst@sirrix.com \
--cc=srajiv@linux.vnet.ibm.com \
--cc=tpmdd-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.