All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matthias Dellweg <2500@gmx.de>
To: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] usb/core/devio.c: Check for printer class specific request
Date: Tue, 27 Sep 2011 01:24:07 +0200	[thread overview]
Message-ID: <20110927012407.6b294fbf@horus> (raw)
In-Reply-To: <20110926223430.GA21960@kroah.com>

[-- Attachment #1: Type: text/plain, Size: 1703 bytes --]

Am Mon, 26 Sep 2011 15:34:30 -0700
schrieb Greg KH <greg@kroah.com>:

> On Sun, Sep 25, 2011 at 02:46:51PM +0200, Matthias Dellweg wrote:
> > From: Matthias Dellweg <2500@gmx.de>
> > 
> > In the usb printer class specific request get_device_id the value of
> > wIndex is (interface << 8 | altsetting) instead of just interface.
> > This enables the detection of some printers with libusb.
> > 
> > The hardware I tested this patch with is a Prolific
> > USB->Centronics cable (067b:2305).
> > 
> > Acked-by: Alan Stern <stern@rowland.harvard.edu>
> > Signed-off-by: Matthias Dellweg <2500@gmx.de>
> > Cc: stable <stable@kernel.org>
> > ---
> >  drivers/usb/core/devio.c |   21 ++++++++++++++++++---
> >  1 files changed, 18 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
> > index 37518df..1d73709 100644
> > --- a/drivers/usb/core/devio.c
> > +++ b/drivers/usb/core/devio.c
> > @@ -607,9 +607,10 @@ static int findintfep(struct usb_device *dev,
> > unsigned int ep) }
> >  
> >  static int check_ctrlrecip(struct dev_state *ps, unsigned int
> > requesttype,
> > -                          unsigned int index)
> > +                          unsigned int request, unsigned int index)
> >  {
> >         int ret = 0;
> > +       struct usb_host_interface *alt_setting;
> >  
> >         if (ps->dev->state != USB_STATE_UNAUTHENTICATED
> >          && ps->dev->state != USB_STATE_ADDRESS
> 
> All of the tabs were stripped out of this email, making it impossible
> to apply it :(
> 
> Care to fix this up and resend it so that I can apply it?
> 
> thanks,
> 
> greg k-h

Again? I mean I'm sorry.
Do you accept it as an attachment?
  Matthias Dellweg

[-- Attachment #2: 0001-usb-core-devio.c-Check-for-printer-class-specific-re.patch --]
[-- Type: text/x-patch, Size: 2580 bytes --]

>From 5bdb64cbee0b2f353d3bc444c147ba78f34a1f69 Mon Sep 17 00:00:00 2001
From: Matthias Dellweg <2500@gmx.de>
Date: Sun, 25 Sep 2011 14:26:25 +0200
Subject: [PATCH] usb/core/devio.c: Check for printer class specific request

In the usb printer class specific request get_device_id the value of
wIndex is (interface << 8 | altsetting) instead of just interface.
This enables the detection of some printers with libusb.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthias Dellweg <2500@gmx.de>
---
 drivers/usb/core/devio.c |   21 ++++++++++++++++++---
 1 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 37518df..1d73709 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -607,9 +607,10 @@ static int findintfep(struct usb_device *dev, unsigned int ep)
 }
 
 static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
-			   unsigned int index)
+			   unsigned int request, unsigned int index)
 {
 	int ret = 0;
+	struct usb_host_interface *alt_setting;
 
 	if (ps->dev->state != USB_STATE_UNAUTHENTICATED
 	 && ps->dev->state != USB_STATE_ADDRESS
@@ -618,6 +619,19 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype,
 	if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype))
 		return 0;
 
+	/*
+	 * check for the special corner case 'get_device_id' in the printer
+	 * class specification, where wIndex is (interface << 8 | altsetting)
+	 * instead of just interface
+	 */
+	if (requesttype == 0xa1 && request == 0) {
+		alt_setting = usb_find_alt_setting(ps->dev->actconfig,
+						   index >> 8, index & 0xff);
+		if (alt_setting
+		 && alt_setting->desc.bInterfaceClass == USB_CLASS_PRINTER)
+			index >>= 8;
+	}
+
 	index &= 0xff;
 	switch (requesttype & USB_RECIP_MASK) {
 	case USB_RECIP_ENDPOINT:
@@ -770,7 +784,8 @@ static int proc_control(struct dev_state *ps, void __user *arg)
 
 	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
 		return -EFAULT;
-	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.wIndex);
+	ret = check_ctrlrecip(ps, ctrl.bRequestType, ctrl.bRequest,
+			      ctrl.wIndex);
 	if (ret)
 		return ret;
 	wLength = ctrl.wLength;		/* To suppress 64k PAGE_SIZE warning */
@@ -1100,7 +1115,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			kfree(dr);
 			return -EINVAL;
 		}
-		ret = check_ctrlrecip(ps, dr->bRequestType,
+		ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest,
 				      le16_to_cpup(&dr->wIndex));
 		if (ret) {
 			kfree(dr);
-- 
1.7.6.3


  reply	other threads:[~2011-09-26 23:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-22 10:10 [PATCH] enable usb control message with class specific request Matthias Dellweg
2011-09-22 15:12 ` Alan Stern
2011-09-22 21:56   ` Matthias Dellweg
2011-09-23  7:05     ` Matthias Dellweg
2011-09-23 16:16       ` Alan Stern
2011-09-23 17:57         ` Matthias Dellweg
2011-09-23 18:31           ` Alan Stern
2011-09-25 12:46             ` Matthias Dellweg
2011-09-26 22:34               ` [PATCH] usb/core/devio.c: Check for printer " Greg KH
2011-09-26 23:24                 ` Matthias Dellweg [this message]
2011-09-26 23:31                   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110927012407.6b294fbf@horus \
    --to=2500@gmx.de \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.