All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] pata_serverworks: cleanup cable detection
Date: Tue, 11 Oct 2011 20:11:44 +0200	[thread overview]
Message-ID: <201110112011.44748.bzolnier@gmail.com> (raw)

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_serverworks: cleanup cable detection

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2010/1/18/324

 drivers/ata/pata_serverworks.c |   37 +++++++------------------------------
 1 file changed, 7 insertions(+), 30 deletions(-)

Index: b/drivers/ata/pata_serverworks.c
===================================================================
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -57,32 +57,14 @@ static const char *csb_bad_ata100[] = {
 };
 
 /**
- *	dell_cable	-	Dell serverworks cable detection
+ *	oem_cable	-	Dell/Sun serverworks cable detection
  *	@ap: ATA port to do cable detect
  *
- *	Dell hide the 40/80 pin select for their interfaces in the top two
- *	bits of the subsystem ID.
+ *	Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ *	for their interfaces in the top two bits of the subsystem ID.
  */
 
-static int dell_cable(struct ata_port *ap)
-{
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
-	if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
-		return ATA_CBL_PATA80;
-	return ATA_CBL_PATA40;
-}
-
-/**
- *	sun_cable	-	Sun Cobalt 'Alpine' cable detection
- *	@ap: ATA port to do cable select
- *
- *	Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
- *	subsystem ID the same as dell. We could use one function but we may
- *	need to extend the Dell one in future
- */
-
-static int sun_cable(struct ata_port *ap)
+static int oem_cable(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
@@ -97,15 +79,10 @@ struct sv_cable_table {
 	int (*cable_detect)(struct ata_port *ap);
 };
 
-/*
- *	Note that we don't copy the old serverworks code because the old
- *	code contains obvious mistakes
- */
-
 static struct sv_cable_table cable_detect[] = {
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_VENDOR_ID_DELL, dell_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE,   PCI_VENDOR_ID_DELL, dell_cable },
-	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_VENDOR_ID_SUN,  sun_cable  },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_VENDOR_ID_DELL, oem_cable },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE,   PCI_VENDOR_ID_DELL, oem_cable },
+	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_VENDOR_ID_SUN,  oem_cable },
 	{ PCI_DEVICE_ID_SERVERWORKS_OSB4IDE,   PCI_ANY_ID, ata_cable_40wire  },
 	{ PCI_DEVICE_ID_SERVERWORKS_CSB5IDE,   PCI_ANY_ID, ata_cable_unknown },
 	{ PCI_DEVICE_ID_SERVERWORKS_CSB6IDE,   PCI_ANY_ID, ata_cable_unknown },

             reply	other threads:[~2011-10-11 18:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-11 18:11 Bartlomiej Zolnierkiewicz [this message]
2011-10-11 19:51 ` [PATCH 2/3] pata_serverworks: cleanup cable detection Alan Cox
2011-10-12 15:05   ` Bartlomiej Zolnierkiewicz
2011-10-12 17:55     ` Alan Cox
2011-10-13 10:32       ` Bartlomiej Zolnierkiewicz
2011-10-13 12:50         ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201110112011.44748.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.