All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] pata_serverworks: add serverworks_fixup()
Date: Tue, 11 Oct 2011 20:13:53 +0200	[thread overview]
Message-ID: <201110112013.54217.bzolnier@gmail.com> (raw)

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_serverworks: add serverworks_fixup()

Factor out common code from serverworks_[re]init_one() to
serverworks_fixup().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
earlier references:
https://lkml.org/lkml/2009/11/25/386

 drivers/ata/pata_serverworks.c |   57 ++++++++++++++++++++---------------------
 1 file changed, 29 insertions(+), 28 deletions(-)

Index: b/drivers/ata/pata_serverworks.c
===================================================================
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -372,6 +372,31 @@ static void serverworks_fixup_ht1000(str
 	pci_write_config_byte(pdev, 0x5A, btr);
 }
 
+static int serverworks_fixup(struct pci_dev *pdev)
+{
+	int rc = 0;
+
+	/* Force master latency timer to 64 PCI clocks */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
+		rc = serverworks_fixup_osb4(pdev);
+		break;
+	case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+		ata_pci_bmdma_clear_simplex(pdev);
+		/* fall through */
+	case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+	case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+		rc = serverworks_fixup_csb(pdev);
+		break;
+	case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+		serverworks_fixup_ht1000(pdev);
+		break;
+	}
+
+	return rc;
+}
 
 static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
@@ -409,13 +434,12 @@ static int serverworks_init_one(struct p
 	if (rc)
 		return rc;
 
-	/* Force master latency timer to 64 PCI clocks */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+	rc = serverworks_fixup(pdev);
 
 	/* OSB4 : South Bridge and IDE */
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
 		/* Select non UDMA capable OSB4 if we can't do fixups */
-		if ( serverworks_fixup_osb4(pdev) < 0)
+		if (rc < 0)
 			ppi[0] = &info[1];
 	}
 	/* setup CSB5/CSB6 : South Bridge and IDE option RAID */
@@ -425,19 +449,13 @@ static int serverworks_init_one(struct p
 
 		 /* If the returned btr is the newer revision then
 		    select the right info block */
-		 if (serverworks_fixup_csb(pdev) == 3)
+		 if (rc == 3)
 		 	ppi[0] = &info[3];
 
 		/* Is this the 3rd channel CSB6 IDE ? */
 		if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
 			ppi[1] = &ata_dummy_port_info;
 	}
-	/* setup HT1000E */
-	else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
-		serverworks_fixup_ht1000(pdev);
-
-	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
-		ata_pci_bmdma_clear_simplex(pdev);
 
 	return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
 }
@@ -452,24 +470,7 @@ static int serverworks_reinit_one(struct
 	if (rc)
 		return rc;
 
-	/* Force master latency timer to 64 PCI clocks */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
-
-	switch (pdev->device) {
-		case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
-			serverworks_fixup_osb4(pdev);
-			break;
-		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
-			ata_pci_bmdma_clear_simplex(pdev);
-			/* fall through */
-		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
-		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
-			serverworks_fixup_csb(pdev);
-			break;
-		case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
-			serverworks_fixup_ht1000(pdev);
-			break;
-	}
+	(void)serverworks_fixup(pdev);
 
 	ata_host_resume(host);
 	return 0;

                 reply	other threads:[~2011-10-11 18:25 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201110112013.54217.bzolnier@gmail.com \
    --to=bzolnier@gmail.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.