From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jgarzik@pobox.com>,
linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] pata_cmd64x: remove dead CMD646 rev 1 code
Date: Wed, 12 Oct 2011 17:22:50 +0200 [thread overview]
Message-ID: <201110121722.50358.bzolnier@gmail.com> (raw)
In-Reply-To: <20111011205803.0c696a21@lxorguk.ukuu.org.uk>
Alan Cox wrote:
> On Tue, 11 Oct 2011 19:59:03 +0200
> Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote:
>
> > From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> > Subject: [PATCH] pata_cmd64x: remove dead CMD646 rev 1 code
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>
> You forgot to document why it is dead and why it should be removed
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH v2] pata_cmd64x: remove dead CMD646 rev 1 code
cmd646r1_bmdma_stop() just calls the standard ata_bmdma_stop()
helper and it has been the case since the driver introduction
by commit 669a5db ("[libata] Add a bunch of PATA drivers.") in
Aug 2006.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
v2: updated patch description
drivers/ata/pata_cmd64x.c | 33 ++-------------------------------
1 file changed, 2 insertions(+), 31 deletions(-)
Index: b/drivers/ata/pata_cmd64x.c
===================================================================
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -249,18 +249,6 @@ static void cmd648_bmdma_stop(struct ata
pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask);
}
-/**
- * cmd646r1_dma_stop - DMA stop callback
- * @qc: Command in progress
- *
- * Stub for now while investigating the r1 quirk in the old driver.
- */
-
-static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
-{
- ata_bmdma_stop(qc);
-}
-
static struct scsi_host_template cmd64x_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
@@ -276,12 +264,6 @@ static struct ata_port_operations cmd64x
.cable_detect = ata_cable_40wire,
};
-static struct ata_port_operations cmd646r1_port_ops = {
- .inherits = &cmd64x_base_ops,
- .bmdma_stop = cmd646r1_bmdma_stop,
- .cable_detect = ata_cable_40wire,
-};
-
static struct ata_port_operations cmd648_port_ops = {
.inherits = &cmd64x_base_ops,
.bmdma_stop = cmd648_bmdma_stop,
@@ -326,12 +308,6 @@ static int cmd64x_init_one(struct pci_de
.udma_mask = ATA_UDMA2,
.port_ops = &cmd64x_port_ops
},
- { /* CMD 646 rev 1 */
- .flags = ATA_FLAG_SLAVE_POSS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .port_ops = &cmd646r1_port_ops
- },
{ /* CMD 648 */
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -374,11 +350,6 @@ static int cmd64x_init_one(struct pci_de
ppi[0] = &cmd_info[2];
ppi[1] = &cmd_info[2];
}
- /* Early rev with other problems ? */
- else if (pdev->revision == 1) {
- ppi[0] = &cmd_info[3];
- ppi[1] = &cmd_info[3];
- }
/* revs 1,2 have no CNTRL_CH0 */
if (pdev->revision < 3)
cntrl_ch0_ok = 0;
@@ -423,8 +394,8 @@ static int cmd64x_reinit_one(struct pci_
static const struct pci_device_id cmd64x[] = {
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 4 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 5 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 3 },
+ { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 4 },
{ },
};
next prev parent reply other threads:[~2011-10-12 15:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-11 17:59 [PATCH 3/3] pata_cmd64x: remove dead CMD646 rev 1 code Bartlomiej Zolnierkiewicz
2011-10-11 19:58 ` Alan Cox
2011-10-12 15:22 ` Bartlomiej Zolnierkiewicz [this message]
2011-10-12 17:55 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201110121722.50358.bzolnier@gmail.com \
--to=bzolnier@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.