All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andres Salomon <dilinger@queued.net>
To: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	Artem Bityutskiy <dedekind1@gmail.com>
Subject: [PATCH 2/2] jffs2: add compr=lzo and compr=zlib options
Date: Sat, 15 Oct 2011 12:50:12 -0700	[thread overview]
Message-ID: <20111015125012.5c9fd572@queued.net> (raw)

..to allow forcing of either compression scheme.  This will override
compiled-in defaults.  jffs2_compress is reworked a bit, as the lzo/zlib
override shares lots of code w/ the PRIORITY mode.

Signed-off-by: Andres Salomon <dilinger@queued.net>
---
 fs/jffs2/compr.c |  119 ++++++++++++++++++++++++++++++++++++++----------------
 fs/jffs2/compr.h |    2 +
 fs/jffs2/super.c |   18 +++++++-
 3 files changed, 102 insertions(+), 37 deletions(-)

diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index 97bc74d..5b6c9d1 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -53,6 +53,78 @@ static int jffs2_is_best_compression(struct jffs2_compressor *this,
 	return 0;
 }
 
+/*
+ * jffs2_selected_compress:
+ * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB).
+ *	If 0, just take the first available compression mode.
+ * @data_in: Pointer to uncompressed data
+ * @cpage_out: Pointer to returned pointer to buffer for compressed data
+ * @datalen: On entry, holds the amount of data available for compression.
+ *	On exit, expected to hold the amount of data actually compressed.
+ * @cdatalen: On entry, holds the amount of space available for compressed
+ *	data. On exit, expected to hold the actual size of the compressed
+ *	data.
+ *
+ * Returns: the compression type used.  Zero is used to show that the data
+ * could not be compressed; probably because we couldn't find the requested
+ * compression mode.
+ */
+static int jffs2_selected_compress(u8 compr, unsigned char *data_in,
+		unsigned char **cpage_out, u32 *datalen, u32 *cdatalen)
+{
+	struct jffs2_compressor *this;
+	int err, ret = JFFS2_COMPR_NONE;
+	uint32_t orig_slen, orig_dlen;
+	char *output_buf;
+
+	output_buf = kmalloc(*cdatalen, GFP_KERNEL);
+	if (!output_buf) {
+		printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
+		return ret;
+	}
+	orig_slen = *datalen;
+	orig_dlen = *cdatalen;
+	spin_lock(&jffs2_compressor_list_lock);
+	list_for_each_entry(this, &jffs2_compressor_list, list) {
+		/* Skip decompress-only and disabled modules */
+		if (!this->compress || this->disabled)
+			continue;
+
+		/* Skip if not the desired compression type */
+		if (compr && (compr != this->compr))
+			continue;
+
+		/*
+		 * Either compression type was unspecified, or we found our
+		 * compressor; either way, we're good to go.
+		 */
+		this->usecount++;
+		spin_unlock(&jffs2_compressor_list_lock);
+
+		*datalen  = orig_slen;
+		*cdatalen = orig_dlen;
+		err = this->compress(data_in, output_buf, datalen, cdatalen);
+
+		spin_lock(&jffs2_compressor_list_lock);
+		this->usecount--;
+		if (!err) {
+			/* Success */
+			ret = this->compr;
+			this->stat_compr_blocks++;
+			this->stat_compr_orig_size += *datalen;
+			this->stat_compr_new_size += *cdatalen;
+			break;
+		}
+	}
+	spin_unlock(&jffs2_compressor_list_lock);
+	if (ret == JFFS2_COMPR_NONE)
+		kfree(output_buf);
+	else
+		*cpage_out = output_buf;
+
+	return ret;
+}
+
 /* jffs2_compress:
  * @data_in: Pointer to uncompressed data
  * @cpage_out: Pointer to returned pointer to buffer for compressed data
@@ -91,37 +163,8 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
 	case JFFS2_COMPR_MODE_NONE:
 		break;
 	case JFFS2_COMPR_MODE_PRIORITY:
-		output_buf = kmalloc(*cdatalen,GFP_KERNEL);
-		if (!output_buf) {
-			printk(KERN_WARNING "JFFS2: No memory for compressor allocation. Compression failed.\n");
-			goto out;
-		}
-		orig_slen = *datalen;
-		orig_dlen = *cdatalen;
-		spin_lock(&jffs2_compressor_list_lock);
-		list_for_each_entry(this, &jffs2_compressor_list, list) {
-			/* Skip decompress-only backwards-compatibility and disabled modules */
-			if ((!this->compress)||(this->disabled))
-				continue;
-
-			this->usecount++;
-			spin_unlock(&jffs2_compressor_list_lock);
-			*datalen  = orig_slen;
-			*cdatalen = orig_dlen;
-			compr_ret = this->compress(data_in, output_buf, datalen, cdatalen);
-			spin_lock(&jffs2_compressor_list_lock);
-			this->usecount--;
-			if (!compr_ret) {
-				ret = this->compr;
-				this->stat_compr_blocks++;
-				this->stat_compr_orig_size += *datalen;
-				this->stat_compr_new_size  += *cdatalen;
-				break;
-			}
-		}
-		spin_unlock(&jffs2_compressor_list_lock);
-		if (ret == JFFS2_COMPR_NONE)
-			kfree(output_buf);
+		ret = jffs2_selected_compress(0, data_in, cpage_out, datalen,
+				cdatalen);
 		break;
 	case JFFS2_COMPR_MODE_SIZE:
 	case JFFS2_COMPR_MODE_FAVOURLZO:
@@ -179,22 +222,28 @@ uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f,
 			best->stat_compr_orig_size += best_slen;
 			best->stat_compr_new_size  += best_dlen;
 			ret = best->compr;
+			*cpage_out = output_buf;
 		}
 		spin_unlock(&jffs2_compressor_list_lock);
 		break;
+	case JFFS2_COMPR_MODE_FORCELZO:
+		ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in,
+				cpage_out, datalen, cdatalen);
+		break;
+	case JFFS2_COMPR_MODE_FORCEZLIB:
+		ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in,
+				cpage_out, datalen, cdatalen);
+		break;
 	default:
 		printk(KERN_ERR "JFFS2: unknown compression mode.\n");
 	}
- out:
+
 	if (ret == JFFS2_COMPR_NONE) {
 		*cpage_out = data_in;
 		*datalen = *cdatalen;
 		none_stat_compr_blocks++;
 		none_stat_compr_size += *datalen;
 	}
-	else {
-		*cpage_out = output_buf;
-	}
 	return ret;
 }
 
diff --git a/fs/jffs2/compr.h b/fs/jffs2/compr.h
index 13bb759..5e91d57 100644
--- a/fs/jffs2/compr.h
+++ b/fs/jffs2/compr.h
@@ -40,6 +40,8 @@
 #define JFFS2_COMPR_MODE_PRIORITY   1
 #define JFFS2_COMPR_MODE_SIZE       2
 #define JFFS2_COMPR_MODE_FAVOURLZO  3
+#define JFFS2_COMPR_MODE_FORCELZO   4
+#define JFFS2_COMPR_MODE_FORCEZLIB  5
 
 #define FAVOUR_LZO_PERCENT 80
 
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index bf40d3e..26366db 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -171,11 +171,25 @@ static int jffs2_parse_options(struct jffs2_sb_info *c, char *data)
 
 			if (!name)
 				return -ENOMEM;
-			if (!strcmp(name, "none")) {
+			if (!strcmp(name, "none"))
 				c->mount_opts.compr = JFFS2_COMPR_MODE_NONE;
-				c->mount_opts.override_compr = true;
+#ifdef CONFIG_JFFS2_LZO
+			else if (!strcmp(name, "lzo"))
+				c->mount_opts.compr = JFFS2_COMPR_MODE_FORCELZO;
+#endif
+#ifdef CONFIG_JFFS2_ZLIB
+			else if (!strcmp(name, "zlib"))
+				c->mount_opts.compr =
+						JFFS2_COMPR_MODE_FORCEZLIB;
+#endif
+			else {
+				printk(KERN_ERR "JFFS2 Error: unknown compressor \"%s\"",
+						name);
+				kfree(name);
+				return -EINVAL;
 			}
 			kfree(name);
+			c->mount_opts.override_compr = true;
 			break;
 		default:
 			printk(KERN_ERR "JFFS2 Error: unrecognized mount option '%s' or missing value\n",
-- 
1.7.2.5

                 reply	other threads:[~2011-10-15 19:50 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20111015125012.5c9fd572@queued.net \
    --to=dilinger@queued.net \
    --cc=dedekind1@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.