From: Ben Dooks <ben-i2c-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: Tomoya MORINAGA
<tomoya-linux-8lRStDepK8iSL1NxhRU65dBPR1lH4CV8@public.gmane.org>
Cc: Christian Gmeiner
<christian.gmeiner-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: Problems with i2c_eg20t
Date: Fri, 21 Oct 2011 00:27:01 +0100 [thread overview]
Message-ID: <20111020232701.GK19115@trinity.fluff.org> (raw)
In-Reply-To: <4E9D6F9A.2060406-8lRStDepK8iSL1NxhRU65dBPR1lH4CV8@public.gmane.org>
On Tue, Oct 18, 2011 at 09:22:50PM +0900, Tomoya MORINAGA wrote:
> (2011/10/18 20:16), Christian Gmeiner wrote:
>
> Hi, Christian
>
>> Hi all
>>
>> I am using a 3.0.7 linux kernel with "[PATCH x/7 v4] i2c-eg20t: ..."
>> from 12. October on top of
>> it.
Shall I leave v4 on the list of things to submit?
>> ...
>> ...
>> [ 1.439115] i2c_eg20t 0000:02:0c.2: pch_i2c_probe :Entered.
>> [ 1.439163] i2c_eg20t 0000:02:0c.2: PCI INT C -> GSI 18 (level,
>> low) -> IRQ 18
>> [ 1.439602] i2c-dev: adapter [i2c_eg20t] registered as minor 0
>> [ 1.439738] i2c i2c-0: adapter [i2c_eg20t] registered
>> [ 1.460041] i2c_eg20t 0000:02:0c.2: pch_i2c_init :I2CCTL=380
>> pch_i2cbc=fc0 pch_i2ctmr=186a Enable interrupts
>> [ 1.460097] i2c_eg20t 0000:02:0c.2: pch_i2c_probe :returns 0.
>> ...
>> ...
>> [ 2.098641] i2c 0-0050: uevent
>> [ 2.098823] at24 0-0050: probe
>> [ 2.098874] i2c 0-0051: uevent
>> [ 2.099070] dummy 0-0051: probe
>> [ 2.099084] i2c i2c-0: client [dummy] registered with bus id 0-0051
>> [ 2.099099] at24 0-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
>> [ 2.099130] i2c i2c-0: master_xfer[0] W, addr=0x50, len=1
>> [ 2.099140] i2c i2c-0: master_xfer[1] R, addr=0x50, len=24
>> [ 2.099151] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer
>> :adap->p_adapter_info->pch_i2c_suspended is 0
>> [ 2.099161] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer :After invoking
>> I2C_MODE_SEL :flag= 0x0
>> [ 2.099171] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer :invoking pch_i2c_writebytes
>> [ 2.099187] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :I2CCTL =
>> 390 msgs->len = 1
>> [ 2.099202] i2c_eg20t 0000:02:0c.2: pch_i2c_start :I2CCTL = 390
>> [ 2.099559] i2c_eg20t 0000:02:0c.2: pch_i2c_cb :PCH_I2CSR = 28
>> [ 2.099586] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :writing 0
>> to Data register
>> [ 2.099872] i2c_eg20t 0000:02:0c.2: pch_i2c_cb :PCH_I2CSR = 28
>> [ 2.099903] i2c_eg20t 0000:02:0c.2: pch_i2c_repstart :I2CCTL = 3b0
>> [ 2.099915] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :return=1
>> [ 2.101095] i2c i2c-0: master_xfer[0] W, addr=0x50, len=1
>> [ 2.101107] i2c i2c-0: master_xfer[1] R, addr=0x50, len=24
>> [ 2.101118] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer
>> :adap->p_adapter_info->pch_i2c_suspended is 0
>> [ 2.101128] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer :After invoking
>> I2C_MODE_SEL :flag= 0x0
>> [ 2.101138] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer :invoking pch_i2c_writebytes
>> [ 2.101153] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :I2CCTL =
>> 3b4 msgs->len = 1
>> [ 2.122099] i2c_eg20t 0000:02:0c.2: pch_i2c_wait_for_bus_idle :I2CSR = 28
>> [ 2.122116] i2c_eg20t 0000:02:0c.2: pch_i2c_wait_for_bus_idle
>> :pch_i2c_wait_for_bus_idle: Timeout Error.return-62
>> [ 2.143103] i2c_eg20t 0000:02:0c.2: pch_i2c_init :I2CCTL=380
>> pch_i2cbc=fc0 pch_i2ctmr=186a Enable interrupts
>> [ 2.145097] i2c i2c-0: master_xfer[0] W, addr=0x50, len=1
>> [ 2.145112] i2c i2c-0: master_xfer[1] R, addr=0x50, len=24
>> [ 2.145124] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer
>> :adap->p_adapter_info->pch_i2c_suspended is 0
>> [ 2.145135] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer :After invoking
>> I2C_MODE_SEL :flag= 0x0
>> [ 2.145145] i2c_eg20t 0000:02:0c.2: pch_i2c_xfer :invoking pch_i2c_writebytes
>> [ 2.145160] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :I2CCTL =
>> 390 msgs->len = 1
>> [ 2.145174] i2c_eg20t 0000:02:0c.2: pch_i2c_start :I2CCTL = 390
>> [ 2.145530] i2c_eg20t 0000:02:0c.2: pch_i2c_cb :PCH_I2CSR = 28
>> [ 2.145556] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :writing 0
>> to Data register
>> [ 2.145843] i2c_eg20t 0000:02:0c.2: pch_i2c_cb :PCH_I2CSR = 28
>> [ 2.145874] i2c_eg20t 0000:02:0c.2: pch_i2c_repstart :I2CCTL = 3b0
>> [ 2.145886] i2c_eg20t 0000:02:0c.2: pch_i2c_writebytes :return=1
>> [ 2.147055] failed to read eeprom
>>
>> Any hints? Btw. the eg20t i2c driver works much better with the patch
>> series from 12. October.
>>
>
> We tested again for I2C EEPROM access using Linux-3.1.0-rc9.
> As a result, the test is OK.
>
> Let me know how to do your test ?
>
> --
> tomoya
> ROHM Co., Ltd.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben Dooks, ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org, http://www.fluff.org/ben/
Large Hadron Colada: A large Pina Colada that makes the universe disappear.
next prev parent reply other threads:[~2011-10-20 23:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-18 11:16 Problems with i2c_eg20t Christian Gmeiner
[not found] ` <CAH9NwWdogRey=hmzjebP9qhX5iOw3rTzdyt2fTWq5C4Z31t=cA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-10-18 12:22 ` Tomoya MORINAGA
[not found] ` <4E9D6F9A.2060406-8lRStDepK8iSL1NxhRU65dBPR1lH4CV8@public.gmane.org>
2011-10-19 6:44 ` Christian Gmeiner
2011-10-20 23:27 ` Ben Dooks [this message]
[not found] ` <20111020232701.GK19115-SMNkleLxa3Z6Wcw2j4pizdi2O/JbrIOy@public.gmane.org>
2011-10-21 0:34 ` Tomoya MORINAGA
2011-10-21 7:23 ` Christian Gmeiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111020232701.GK19115@trinity.fluff.org \
--to=ben-i2c-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=christian.gmeiner-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tomoya-linux-8lRStDepK8iSL1NxhRU65dBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.