From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 22 Oct 2011 00:52:38 +0200 Subject: [U-Boot] [PATCH v17 3/9] nds32/core N1213: NDS32 N12 core family N1213 In-Reply-To: <1319092871-28135-3-git-send-email-macpaul@andestech.com> References: <20111011125328.795421408753@gemini.denx.de> <1319092871-28135-3-git-send-email-macpaul@andestech.com> Message-ID: <20111021225238.CEAC911F9E79@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Macpaul Lin, In message <1319092871-28135-3-git-send-email-macpaul@andestech.com> you wrote: > Add N1213 cpu core (N12 Core family) support for NDS32 arch. > This patch includes start.S for the initialize procedure of N1213. > > Start procedure: > start.S will start up the N1213 CPU core at first, > then jump to SoC dependent "lowlevel_init.S" and > "watchdog.S" to configure peripheral devices. > > Signed-off-by: Macpaul Lin > Signed-off-by: Greentime Hu > --- > Changes for v1 to v6: > - Style clean up and reorganize code > Changes for v7-v9: > - No Change. > Changes for v10: > - start.S of N1213 CPU has been rewrote for relocation support. > - u-boot.lds: > - Add got and *(.got.plt) section for support GCC 4 toolchain > - Modified for relocation implementation. > Changes for v11: > - arch/nds32/cpu/n1213/Makefile > - replace $(AR) $(call cmd_link_o_target,...) > Changes for v12: > - u-boot.lds > - Remove the 0x00000000 base address in linker script. > The base address of the binary will be determined by CONFIG_SYS_TEXT_BASE > - Remove the CPU features in commit log and add to README in later patches. > Changes for v13-v14: > - No change. > Changes for v15: > - start.S: fix exception vector aligment (add setivb in reset vector). > Changes for v16: > - start.S: remove lines over 80 characters. > Changes for v17: > - Fix a space ident warning which checkpatch doesn't found. > > arch/nds32/cpu/n1213/Makefile | 50 ++++ > arch/nds32/cpu/n1213/start.S | 529 +++++++++++++++++++++++++++++++++++++++ > arch/nds32/cpu/n1213/u-boot.lds | 70 +++++ > 3 files changed, 649 insertions(+), 0 deletions(-) > create mode 100644 arch/nds32/cpu/n1213/Makefile > create mode 100644 arch/nds32/cpu/n1213/start.S > create mode 100644 arch/nds32/cpu/n1213/u-boot.lds Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de All he had was nothing, but that was something, and now it had been taken away. - Terry Pratchett, _Sourcery_