From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfgang Denk Date: Sat, 22 Oct 2011 00:59:06 +0200 Subject: [U-Boot] [PATCH RESEND] FAT: Add FAT write feature In-Reply-To: <1317973947-1312-1-git-send-email-dg77.kim@samsung.com> References: <1317973947-1312-1-git-send-email-dg77.kim@samsung.com> Message-ID: <20111021225906.AA1BD11F9E79@gemini.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear Donggeun Kim, In message <1317973947-1312-1-git-send-email-dg77.kim@samsung.com> you wrote: > In some cases, saving data in RAM as a file with FAT format is required. > This patch allows the file to be written in FAT formatted partition. > > The usage is similar with reading a file. > First, fat_register_device function is called before file_fat_write function > in order to set target partition. > Then, file_fat_write function is invoked with desired file name, > start ram address for writing data, and file size. > > Signed-off-by: Donggeun Kim > Signed-off-by: Kyungmin Park > --- > fs/fat/Makefile | 1 + > fs/fat/fat.c | 2 + > fs/fat/fat_write.c | 1091 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > include/fat.h | 3 + > 4 files changed, 1097 insertions(+), 0 deletions(-) > create mode 100644 fs/fat/fat_write.c > > diff --git a/fs/fat/Makefile b/fs/fat/Makefile > index 93b6f07..9635d36 100644 > --- a/fs/fat/Makefile > +++ b/fs/fat/Makefile > @@ -25,6 +25,7 @@ LIB = $(obj)libfat.o > > AOBJS = > COBJS-$(CONFIG_CMD_FAT) := fat.o > +COBJS-$(CONFIG_FAT_WRITE):= fat_write.o Can ypu please document this new CONFIG_FAT_WRITE option in the README? Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "A complex system that works is invariably found to have evolved from a simple system that worked." - John Gall, _Systemantics_