From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Lindner Date: Thu, 27 Oct 2011 04:19:30 +0200 Subject: [ath9k-devel] WPA and Apple devices In-Reply-To: <20111026074708.GF2563@jouni.qca.qualcomm.com> References: <201110260400.03750.lindner_marek@yahoo.de> <20111026074708.GF2563@jouni.qca.qualcomm.com> Message-ID: <201110270419.30314.lindner_marek@yahoo.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On Wednesday, October 26, 2011 09:47:08 Jouni Malinen wrote: > On Wed, Oct 26, 2011 at 04:00:03AM +0200, Marek Lindner wrote: > > These combinations don't work: > > * 2x VAP, WPA on VAP#1 only > > * 2x VAP, WPA on both > > Is that WPA or WPA2? WPA or WPA2 does not make any difference. > Does the connection failure happen with both VAPs or only one of them? IIRC both VAPs failed but I am going to retest to be certain. > > It looks like the mac80211/ath9k driver gets confused when WPA is > > activated on VAP#1. Furthermore, other all non-Apple device seem to work > > fine. Any idea how to debug it further ? > > Would you be able to capture all the frames exchanged between the AP > and the station with a wireless sniffer? It would be interesting to see > sniffer capture both for a successful and failed connection attempts. Yes, no problem. I will get the dumps and upload them somewhere. Regards, Marek