[PATCH 07/21] ktest: Add option REBOOT_SUCCESS_LINE to stop waiting after a reboot

[Steven Rostedt <rostedt@goodmis.org>]

[-- Attachment #1: Type: text/plain, Size: 3805 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle
console before starting the next test. By setting the
REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the
line while rebooting to a new kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 tools/testing/ktest/ktest.pl    |   33 +++++++++++++++++++++++++++------
 tools/testing/ktest/sample.conf |   10 ++++++++++
 2 files changed, 37 insertions(+), 6 deletions(-)

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index 74fb2ac..51ddaa5 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -117,6 +117,7 @@ my $timeout;
 my $booted_timeout;
 my $detect_triplefault;
 my $console;
+my $reboot_success_line;
 my $success_line;
 my $stop_after_success;
 my $stop_after_failure;
@@ -612,6 +613,13 @@ sub wait_for_monitor;
 sub reboot {
     my ($time) = @_;
 
+    if (defined($time)) {
+	start_monitor;
+	# flush out current monitor
+	# May contain the reboot success line
+	wait_for_monitor 1;
+    }
+
     # try to reboot normally
     if (run_command $reboot) {
 	if (defined($powercycle_after_reboot)) {
@@ -624,8 +632,7 @@ sub reboot {
     }
 
     if (defined($time)) {
-	start_monitor;
-	wait_for_monitor $time;
+	wait_for_monitor($time, $reboot_success_line);
 	end_monitor;
     }
 }
@@ -706,16 +713,29 @@ sub end_monitor {
 }
 
 sub wait_for_monitor {
-    my ($time) = @_;
+    my ($time, $stop) = @_;
+    my $full_line = "";
     my $line;
+    my $booted = 0;
 
     doprint "** Wait for monitor to settle down **\n";
 
     # read the monitor and wait for the system to calm down
-    do {
+    while (!$booted) {
 	$line = wait_for_input($monitor_fp, $time);
-	print "$line" if (defined($line));
-    } while (defined($line));
+	last if (!defined($line));
+	print "$line";
+	$full_line .= $line;
+
+	if (defined($stop) && $full_line =~ /$stop/) {
+	    doprint "wait for monitor detected $stop\n";
+	    $booted = 1;
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+    }
     print "** Monitor flushed **\n";
 }
 
@@ -2836,6 +2856,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $console = set_test_option("CONSOLE", $i);
     $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
     $success_line = set_test_option("SUCCESS_LINE", $i);
+    $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i);
     $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
     $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
     $stop_test_after = set_test_option("STOP_TEST_AFTER", $i);
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index b3e0dc1..67bc4e0 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -423,6 +423,14 @@
 # (default "login:")
 #SUCCESS_LINE = login:
 
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
 # In case the console constantly fills the screen, having
 # a specified time to stop the test after success is recommended.
 # (in seconds)
@@ -488,6 +496,8 @@
 # another test. If a reboot to the reliable kernel happens,
 # we wait SLEEP_TIME for the console to stop producing output
 # before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
 # (default 60)
 #SLEEP_TIME = 60
 
-- 
1.7.6.3



[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]