From: JiSheng Zhang <jszhang3@gmail.com>
To: jgarzik@pobox.com
Cc: linux-ide@vger.kernel.org, avorontsov@mvista.com,
linux-kernel@vger.kernel.org
Subject: [PATCH] ahci_platform: add suspend & resume support
Date: Sun, 30 Oct 2011 14:21:22 +0800 [thread overview]
Message-ID: <20111030142122.560216e2@ustc> (raw)
Signed-off-by: JiSheng Zhang <jszhang3@gmail.com>
---
drivers/ata/ahci_platform.c | 54 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index c03277d..60ff9eb 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -202,12 +202,66 @@ static int __devexit ahci_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int ahci_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl;
+
+ if (mesg.event & PM_EVENT_SLEEP) {
+ /* AHCI spec rev1.1 section 8.3.3:
+ * Software must disable interrupts prior to requesting a
+ * transition of the HBA to D3 state.
+ */
+ ctl = readl(mmio + HOST_CTL);
+ ctl &= ~HOST_IRQ_EN;
+ writel(ctl, mmio + HOST_CTL);
+ readl(mmio + HOST_CTL); /* flush */
+ }
+
+ return ata_host_suspend(host, mesg);
+}
+
+static int ahci_resume(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev->platform_data;
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ if (pdata && pdata->init) {
+ rc = pdata->init(dev, hpriv->mmio);
+ if (rc)
+ return rc;
+ }
+
+ if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+#endif
+
static struct platform_driver ahci_driver = {
.remove = __devexit_p(ahci_remove),
.driver = {
.name = "ahci",
.owner = THIS_MODULE,
},
+#ifdef CONFIG_PM
+ .suspend = ahci_suspend,
+ .resume = ahci_resume,
+#endif
.id_table = ahci_devtype,
};
--
1.7.6.3
next reply other threads:[~2011-10-30 6:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-30 6:21 JiSheng Zhang [this message]
2011-10-30 15:23 ` [PATCH] ahci_platform: add suspend & resume support Srivatsa S. Bhat
2011-10-30 19:16 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111030142122.560216e2@ustc \
--to=jszhang3@gmail.com \
--cc=avorontsov@mvista.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.