From: Kalle Valo <kvalo@qca.qualcomm.com>
To: kvalo@qca.qualcomm.com
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 2/5] ath6kl: create ath6kl_cfg80211_stop()
Date: Mon, 31 Oct 2011 11:56:02 +0200 [thread overview]
Message-ID: <20111031095602.3598.40105.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20111031095550.3598.52653.stgit@localhost6.localdomain6>
Just take code from deep sleep for now, will be improved later. No
functional changes.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 49 ++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath6kl/cfg80211.h | 2 +
drivers/net/wireless/ath/ath6kl/main.c | 46 +-------------------------
3 files changed, 52 insertions(+), 45 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 188fded..94038cb 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2112,6 +2112,55 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
.mgmt_frame_register = ath6kl_mgmt_frame_register,
};
+void ath6kl_cfg80211_stop(struct ath6kl *ar)
+{
+ struct ath6kl_vif *vif;
+
+ /* FIXME: for multi vif */
+ vif = ath6kl_vif_first(ar);
+ if (!vif) {
+ /* save the current power mode before enabling power save */
+ ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
+
+ if (ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER) != 0)
+ ath6kl_warn("ath6kl_deep_sleep_enable: "
+ "wmi_powermode_cmd failed\n");
+ return;
+ }
+
+ switch (vif->sme_state) {
+ case SME_CONNECTING:
+ cfg80211_connect_result(vif->ndev, vif->bssid, NULL, 0,
+ NULL, 0,
+ WLAN_STATUS_UNSPECIFIED_FAILURE,
+ GFP_KERNEL);
+ break;
+ case SME_CONNECTED:
+ default:
+ /*
+ * FIXME: oddly enough smeState is in DISCONNECTED during
+ * suspend, why? Need to send disconnected event in that
+ * state.
+ */
+ cfg80211_disconnected(vif->ndev, 0, NULL, 0, GFP_KERNEL);
+ break;
+ }
+
+ if (test_bit(CONNECTED, &vif->flags) ||
+ test_bit(CONNECT_PEND, &vif->flags))
+ ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
+
+ vif->sme_state = SME_DISCONNECTED;
+
+ /* disable scanning */
+ if (ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx, 0xFFFF, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0) != 0)
+ printk(KERN_WARNING "ath6kl: failed to disable scan "
+ "during suspend\n");
+
+ ath6kl_cfg80211_scan_complete_event(vif, true);
+}
+
struct ath6kl *ath6kl_core_alloc(struct device *dev)
{
struct ath6kl *ar;
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index f323a49..bb0ac22 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -40,4 +40,6 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
void ath6kl_cfg80211_tkip_micerr_event(struct ath6kl_vif *vif, u8 keyid,
bool ismcast);
+void ath6kl_cfg80211_stop(struct ath6kl *ar);
+
#endif /* ATH6KL_CFG80211_H */
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index d2822d0..378dc8d 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -580,51 +580,7 @@ void ath6kl_disconnect(struct ath6kl_vif *vif)
void ath6kl_deep_sleep_enable(struct ath6kl *ar)
{
- struct ath6kl_vif *vif;
-
- /* FIXME: for multi vif */
- vif = ath6kl_vif_first(ar);
- if (!vif) {
- /* save the current power mode before enabling power save */
- ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
-
- if (ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER) != 0)
- ath6kl_warn("ath6kl_deep_sleep_enable: "
- "wmi_powermode_cmd failed\n");
- return;
- }
-
- switch (vif->sme_state) {
- case SME_CONNECTING:
- cfg80211_connect_result(vif->ndev, vif->bssid, NULL, 0,
- NULL, 0,
- WLAN_STATUS_UNSPECIFIED_FAILURE,
- GFP_KERNEL);
- break;
- case SME_CONNECTED:
- default:
- /*
- * FIXME: oddly enough smeState is in DISCONNECTED during
- * suspend, why? Need to send disconnected event in that
- * state.
- */
- cfg80211_disconnected(vif->ndev, 0, NULL, 0, GFP_KERNEL);
- break;
- }
-
- if (test_bit(CONNECTED, &vif->flags) ||
- test_bit(CONNECT_PEND, &vif->flags))
- ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
-
- vif->sme_state = SME_DISCONNECTED;
-
- /* disable scanning */
- if (ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx, 0xFFFF, 0, 0,
- 0, 0, 0, 0, 0, 0, 0) != 0)
- printk(KERN_WARNING "ath6kl: failed to disable scan "
- "during suspend\n");
-
- ath6kl_cfg80211_scan_complete_event(vif, true);
+ ath6kl_cfg80211_stop(ar);
/* save the current power mode before enabling power save */
ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
next prev parent reply other threads:[~2011-10-31 9:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 9:55 [PATCH 1/5] ath6kl: add aborted parameter to ath6kl_cfg80211_scan_complete_event() Kalle Valo
2011-10-31 9:56 ` Kalle Valo [this message]
2011-10-31 9:56 ` [PATCH 3/5] ath6kl: implement ath6kl_cfg80211_suspend() Kalle Valo
2011-10-31 9:56 ` [PATCH 4/5] ath6kl: add state variable depicting hw/fw state Kalle Valo
2011-10-31 9:56 ` [PATCH 5/5] ath6kl: cut power during suspend Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111031095602.3598.40105.stgit@localhost6.localdomain6 \
--to=kvalo@qca.qualcomm.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.