From: "Pasi Kärkkäinen" <pasik@iki.fi>
To: xen-devel@lists.xensource.com
Cc: xen@lists.fedoraproject.org
Subject: Xen 4.1.1 HVM guest cdrom trouble, lost interrupts, ata failed commands (frozen)
Date: Mon, 31 Oct 2011 20:22:20 +0200 [thread overview]
Message-ID: <20111031182220.GZ12984@reaktio.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 8470 bytes --]
Hello,
I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms
and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely.
I noticed a problem with Fedora 16 Xen HVM guests though.
The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive..
Full HVM guest kernel dmesg attached to this email.
See the end of this email for Xen cfgfile for the domain and some workarounds..
Important parts of the guest dmesg:
[ 0.000000] Linux version 3.1.0-5.fc16.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.6.1 20111003 (Red Hat 4.6.1-10) (GCC) ) #1 SMP Thu Oct 27 03:46:50 UTC 2011
[ 0.000000] Command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
<snip>
[ 4.310149] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 4.325107] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 4.339397] ata1.00: 62914560 sectors, multi 16: LBA48
[ 4.362818] ata1.00: configured for MWDMA2
[ 4.373968] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5
[ 4.495976] ata2.00: configured for MWDMA2
[ 4.540361] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.556311] sd 0:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 4.575201] sd 0:0:0:0: [sda] Write Protect is off
[ 4.586948] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 9.511381] ata2.00: qc timeout (cmd 0xa0)
[ 9.514923] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 9.675770] ata2.00: configured for MWDMA2
[ 14.680417] ata2.00: qc timeout (cmd 0xa0)
[ 14.685010] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 14.690798] ata2.00: limiting speed to MWDMA2:PIO3
[ 14.850811] ata2.00: configured for MWDMA2
[ 19.855357] ata2.00: qc timeout (cmd 0xa0)
[ 19.859931] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 19.865765] ata2.00: disabled
[ 19.869676] ata2: soft resetting link
[ 20.056857] ata2: EH complete
[ 35.712153] ata1: lost interrupt (Status 0x50)
[ 35.722381] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 35.735437] ata1.00: failed command: READ DMA
[ 35.745912] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 35.745913] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 35.777373] ata1.00: status: { DRDY }
[ 35.785709] ata1: soft resetting link
[ 35.946815] ata1.00: configured for MWDMA2
[ 35.955695] ata1.00: device reported invalid CHS sector 0
[ 35.967512] ata1: EH complete
[ 66.784177] ata1: lost interrupt (Status 0x50)
[ 66.788709] ata1.00: limiting speed to MWDMA1:PIO2
[ 66.793395] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 66.799857] ata1.00: failed command: READ DMA
[ 66.804193] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 66.804194] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 66.818098] ata1.00: status: { DRDY }
[ 66.822310] ata1: soft resetting link
[ 66.981440] ata1.00: configured for MWDMA1
[ 66.985550] ata1.00: device reported invalid CHS sector 0
[ 66.990704] ata1: EH complete
[ 97.760172] ata1: lost interrupt (Status 0x50)
[ 97.765465] ata1.00: limiting speed to PIO2
[ 97.770093] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 97.777360] ata1.00: failed command: READ DMA
[ 97.781823] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 97.781824] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 97.795560] ata1.00: status: { DRDY }
[ 97.799269] ata1: soft resetting link
[ 97.957830] ata1.00: configured for PIO2
[ 97.961338] ata1.00: device reported invalid CHS sector 0
[ 97.965874] ata1: EH complete
[ 128.736132] ata1: lost interrupt (Status 0x58)
[ 128.830108] ata1.00: limiting speed to PIO1
[ 128.834274] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 128.840650] ata1.00: failed command: READ MULTIPLE
[ 128.845289] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 128.845291] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 128.859072] ata1.00: status: { DRDY }
[ 128.863253] ata1: soft resetting link
[ 129.022319] ata1.00: configured for PIO1
[ 129.026279] ata1.00: device reported invalid CHS sector 0
[ 129.031398] ata1: EH complete
[ 159.712158] ata1: lost interrupt (Status 0x58)
[ 159.802324] ata1.00: limiting speed to PIO0
[ 159.806496] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 159.812888] ata1.00: failed command: READ MULTIPLE
[ 159.817503] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 159.817505] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 159.831339] ata1.00: status: { DRDY }
[ 159.835482] ata1: soft resetting link
[ 159.994295] ata1.00: configured for PIO0
[ 159.998279] ata1.00: device reported invalid CHS sector 0
[ 160.003401] ata1: EH complete
[ 190.816215] ata1: lost interrupt (Status 0x58)
[ 190.898787] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 190.904509] ata1.00: failed command: READ MULTIPLE
[ 190.908616] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 190.908617] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 190.920911] ata1.00: status: { DRDY }
[ 190.924608] ata1: soft resetting link
[ 191.082728] ata1.00: configured for PIO0
[ 191.086575] ata1.00: device reported invalid CHS sector 0
[ 191.091675] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 191.099098] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 191.108415] Descriptor sense data with sense descriptors (in hex):
[ 191.114713] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 191.130002] 00 00 00 00
[ 191.136199] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 191.143574] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 191.157045] end_request: I/O error, dev sda, sector 0
[ 191.161675] Buffer I/O error on device sda, logical block 0
[ 191.166372] ata1: EH complete
[ 221.792133] ata1: lost interrupt (Status 0x58)
[ 221.875310] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 221.882176] ata1.00: failed command: READ MULTIPLE
[ 221.886834] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 221.886836] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 221.901648] ata1.00: status: { DRDY }
[ 221.906550] ata1: soft resetting link
[ 222.124783] ata1.00: configured for PIO0
[ 222.127744] ata1.00: device reported invalid CHS sector 0
[ 222.132141] ata1: EH complete
/etc/xen/<vm> cfgfile:
kernel = "hvmloader"
builder='hvm'
device_model = 'qemu-dm'
name = "f16test64hvm"
memory = 1024
vcpus=1
pae=1
acpi=1
apic=1
vif = [ 'type=ioemu, mac=00:16:3e:04:01:14, bridge=virbr0' ]
disk = [ 'phy:/dev/vg_f16/f16test64hvm,hda,w', 'file:/root/iso/Fedora-16-Final-RC2-x86_64-DVD.iso,hdc:cdrom,r' ]
boot='cd'
xen_platform_pci=0
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
sdl=0
vnc=1
vncpasswd=''
stdvga=0
serial='pty'
tsc_mode=0
usb=1
usbdevice='tablet'
keymap='fi'
I'm using "xm create" to start the HVM guest.
I noticed I can workaround the problem with the following methods:
- Specify "xen_platform_pci=1" in the domain cfgfile. The emulated dvdrom drive works then,
but there are other problems (nic doesn't work - the mac address is all empty and the installer fails).
Guest dmesg from this case also attached to this email.
- Upgrade Xen hypervisor to 4.1.2 (rpms available in f16 updates-testing).
Emulated dvdrom works then with the original hvm domain cfgfile above.
guest kernel dmesg for this working method attached aswell.
The following guest kernel options didn't help with the dvdrom problem:
- libata.dma=0
- pci=nocrs
Is this a known problem? Any proper workarounds for Xen 4.1.1,
or should everyone upgrade to Xen 4.1.2 ?
Info about the Fedora 16 dom0 host:
# uname -a
Linux f16dom0.localdomain 3.1.0-5.fc16.x86_64 #1 SMP Thu Oct 27 03:46:50 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
# rpm -qa|grep xen
xen-hypervisor-4.1.1-8.fc16.x86_64
xen-libs-4.1.1-8.fc16.x86_64
xen-runtime-4.1.1-8.fc16.x86_64
xen-4.1.1-8.fc16.x86_64
xen-licenses-4.1.1-8.fc16.x86_64
Thanks,
-- Pasi
[-- Attachment #2: xen-4.1.1-f16test64hvm-linux-3.1.0-platform-pci-disabled.log --]
[-- Type: text/plain, Size: 24598 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-5.fc16.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.6.1 20111003 (Red Hat 4.6.1-10) (GCC) ) #1 SMP Thu Oct 27 03:46:50 UTC 2011
[ 0.000000] Command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] DMI 2.4 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.1.
[ 0.000000] Xen Platform PCI: unrecognised magic value
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fbc70] fbc70
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] RAMDISK: 37e7a000 - 3ffdf000
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000fc003400 00040
[ 0.000000] ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000040000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000
[ 0.000000] NODE_DATA [000000003ffec000 - 000000003fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 15 CPUs, 14 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bc000000)
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880037c00000 s81024 r8192 d21376 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 883240k/1048576k available (4867k kernel code, 456k absent, 164880k reserved, 6782k data, 940k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:1208 16
[ 0.000000] Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Detected 2677.276 MHz processor.
[ 0.004999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5354.55 BogoMIPS (lpj=2677276)
[ 0.014003] pid_max: default: 32768 minimum: 301
[ 0.019036] Security Framework initialized
[ 0.023010] SELinux: Initializing.
[ 0.027198] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.034258] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.040108] Mount-cache hash table entries: 256
[ 0.045162] Initializing cgroup subsys cpuacct
[ 0.049006] Initializing cgroup subsys memory
[ 0.058038] Initializing cgroup subsys devices
[ 0.078003] Initializing cgroup subsys freezer
[ 0.122002] Initializing cgroup subsys net_cls
[ 0.131996] Initializing cgroup subsys blkio
[ 0.141009] Initializing cgroup subsys perf_event
[ 0.153114] CPU: Physical Processor ID: 0
[ 0.161990] CPU: Processor Core ID: 0
[ 0.172992] mce: CPU supports 9 MCE banks
[ 0.187024] SMP alternatives: switching to UP code
[ 0.207887] ACPI: Core revision 20110623
[ 0.231609] ftrace: allocating 25204 entries in 99 pages
[ 0.279972] Not enabling x2apic, Intr-remapping init failed.
[ 0.297970] Switched APIC routing to physical flat.
[ 0.311246] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.332335] CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz stepping 05
[ 0.352990] installing Xen timer for CPU 0
[ 0.358056] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
[ 0.366988] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.367999] Brought up 1 CPUs
[ 0.368967] Total of 1 processors activated (5354.55 BogoMIPS).
[ 0.374024] devtmpfs: initialized
[ 0.412971] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.414011] RTC time: 17:45:37, date: 10/31/11
[ 0.415022] NET: Registered protocol family 16
[ 0.418010] ACPI: bus type pci registered
[ 0.421960] PCI: Using configuration type 1 for base access
[ 0.437115] bio: create slab <bio-0> at 0
[ 0.438093] ACPI: Added _OSI(Module Device)
[ 0.438963] ACPI: Added _OSI(Processor Device)
[ 0.439967] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.440974] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.519054] ACPI: Interpreter enabled
[ 0.519951] ACPI: (supports S0 S3 S4 S5)
[ 0.524951] ACPI: Using IOAPIC for interrupt routing
[ 1.096959] ACPI: No dock devices found.
[ 1.097861] HEST: Table not found.
[ 1.098862] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.099943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.100988] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.101860] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.102862] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.103860] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[ 1.144922] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 1.144923] * this clock source is slow. Consider trying other clock sources
[ 1.154850] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 1.185924] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 1.884892] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 1.890929] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.896927] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.902931] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 1.908856] xen/balloon: Initialising balloon driver.
[ 1.909736] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 1.910751] xen-balloon: Initialising balloon driver.
[ 1.911877] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.912734] vgaarb: loaded
[ 1.913733] vgaarb: bridge control possible 0000:00:02.0
[ 1.914821] SCSI subsystem initialized
[ 1.915855] usbcore: registered new interface driver usbfs
[ 1.916752] usbcore: registered new interface driver hub
[ 1.917762] usbcore: registered new device driver usb
[ 1.918801] PCI: Using ACPI for IRQ routing
[ 1.921776] NetLabel: Initializing
[ 1.922732] NetLabel: domain hash size = 128
[ 1.923731] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.924747] NetLabel: unlabeled traffic allowed by default
[ 1.925738] Switching to clocksource xen
[ 1.927071] Switched to NOHz mode on CPU #0
[ 1.944150] pnp: PnP ACPI init
[ 1.950692] ACPI: bus type pnp registered
[ 1.968745] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.009903] system 00:02: [io 0x10c0-0x1141] has been reserved
[ 2.020115] system 00:02: [io 0xb044-0xb047] has been reserved
[ 2.032398] system 00:03: [io 0x08a0-0x08a3] has been reserved
[ 2.046965] system 00:03: [io 0x0cc0-0x0ccf] has been reserved
[ 2.060746] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 2.132279] pnp: PnP ACPI: found 12 devices
[ 2.143196] ACPI: ACPI bus type pnp unregistered
[ 2.168095] NET: Registered protocol family 2
[ 2.180174] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.199948] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 2.223886] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.240895] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.251707] TCP reno registered
[ 2.257377] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.271814] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.292031] NET: Registered protocol family 1
[ 2.296744] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 2.307567] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 2.321092] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.337035] Unpacking initramfs...
[ 2.994473] Freeing initrd memory: 132500k freed
[ 3.031082] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.036743] audit: initializing netlink socket (disabled)
[ 3.041250] type=2000 audit(1320083141.268:1): initialized
[ 3.069999] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.081358] VFS: Disk quotas dquot_6.5.2
[ 3.085050] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.090701] msgmni has been set to 1983
[ 3.094445] alg: No test for stdrng (krng)
[ 3.098010] NET: Registered protocol family 38
[ 3.107373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.123398] io scheduler noop registered
[ 3.132300] io scheduler deadline registered
[ 3.143504] io scheduler cfq registered (default)
[ 3.154997] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.168358] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.186729] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.201997] acpiphp: Slot [0] registered
[ 3.212613] acpiphp: Slot [1] registered
[ 3.227042] acpiphp: Slot [2] registered
[ 3.234824] acpiphp: Slot [3] registered
[ 3.243333] acpiphp: Slot [4] registered
[ 3.254169] acpiphp: Slot [5] registered
[ 3.264412] acpiphp: Slot [6] registered
[ 3.278546] acpiphp: Slot [7] registered
[ 3.288234] acpiphp: Slot [8] registered
[ 3.299249] acpiphp: Slot [9] registered
[ 3.309300] acpiphp: Slot [10] registered
[ 3.320623] acpiphp: Slot [11] registered
[ 3.329553] acpiphp: Slot [12] registered
[ 3.340383] acpiphp: Slot [13] registered
[ 3.351436] acpiphp: Slot [14] registered
[ 3.371532] acpiphp: Slot [15] registered
[ 3.383484] acpiphp: Slot [16] registered
[ 3.391217] acpiphp: Slot [17] registered
[ 3.400109] acpiphp: Slot [18] registered
[ 3.410752] acpiphp: Slot [19] registered
[ 3.418563] acpiphp: Slot [20] registered
[ 3.427333] acpiphp: Slot [21] registered
[ 3.435531] acpiphp: Slot [22] registered
[ 3.447844] acpiphp: Slot [23] registered
[ 3.458886] acpiphp: Slot [24] registered
[ 3.468774] acpiphp: Slot [25] registered
[ 3.480989] acpiphp: Slot [26] registered
[ 3.491224] acpiphp: Slot [27] registered
[ 3.508879] acpiphp: Slot [28] registered
[ 3.518513] acpiphp: Slot [29] registered
[ 3.534696] acpiphp: Slot [30] registered
[ 3.549822] acpiphp: Slot [31] registered
[ 3.560227] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.574537] ACPI: Power Button [PWRF]
[ 3.586151] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 3.602954] ACPI: Sleep Button [SLPF]
[ 3.676678] ERST: Table is not found!
[ 3.683875] GHES: HEST is not enabled!
[ 3.687897] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.750685] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.793768] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.805453] Non-volatile memory driver v1.3
[ 3.811376] Linux agpgart interface v0.103
[ 3.817834] loop: module loaded
[ 3.827537] scsi0 : ata_piix
[ 3.832212] scsi1 : ata_piix
[ 3.836293] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 3.856704] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 3.872777] Fixed MDIO Bus: probed
[ 3.884228] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.899724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.917226] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.933624] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.949714] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 3.965097] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 3.988778] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c100
[ 4.009517] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.027023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.046997] usb usb1: Product: UHCI Host Controller
[ 4.063419] usb usb1: Manufacturer: Linux 3.1.0-5.fc16.x86_64 uhci_hcd
[ 4.076305] usb usb1: SerialNumber: 0000:00:01.2
[ 4.091799] Refined TSC clocksource calibration: 2677.185 MHz.
[ 4.105911] hub 1-0:1.0: USB hub found
[ 4.115835] hub 1-0:1.0: 2 ports detected
[ 4.147486] usbcore: registered new interface driver usbserial
[ 4.167002] USB Serial support registered for generic
[ 4.179996] usbcore: registered new interface driver usbserial_generic
[ 4.202861] usbserial: USB Serial Driver core
[ 4.211934] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.233258] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.241291] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.255074] mousedev: PS/2 mouse device common for all mice
[ 4.275424] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.310149] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 4.325107] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 4.339397] ata1.00: 62914560 sectors, multi 16: LBA48
[ 4.362818] ata1.00: configured for MWDMA2
[ 4.373968] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5
[ 4.393304] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.408850] rtc0: alarms up to one day, 114 bytes nvram
[ 4.423453] device-mapper: uevent: version 1.0.3
[ 4.436554] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 4.474247] usb 1-2: new full speed USB device number 2 using uhci_hcd
[ 4.495976] ata2.00: configured for MWDMA2
[ 4.511333] cpuidle: using governor ladder
[ 4.519271] cpuidle: using governor menu
[ 4.529126] EFI Variables Facility v0.08 2004-May-17
[ 4.540361] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.556311] sd 0:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 4.575201] sd 0:0:0:0: [sda] Write Protect is off
[ 4.586948] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.612829] usbcore: registered new interface driver usbhid
[ 4.628550] usbhid: USB HID core driver
[ 4.637882] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.651005] TCP cubic registered
[ 4.658941] Initializing XFRM netlink socket
[ 4.670660] NET: Registered protocol family 10
[ 4.690433] Mobile IPv6
[ 4.693485] NET: Registered protocol family 17
[ 4.698486] Registering the dns_resolver key type
[ 4.703788] registered taskstats version 1
[ 4.711313] IMA: No TPM chip found, activating TPM-bypass!
[ 4.719240] Magic number: 15:394:796
[ 4.723704] rtc_cmos 00:05: setting system clock to 2011-10-31 17:45:40 UTC (1320083140)
[ 4.735181] Initializing network drop monitor service
[ 4.939838] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 7.954331] usb 1-2: New USB device found, idVendor=0627, idProduct=0001
[ 7.960550] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.967135] usb 1-2: Product: QEMU USB Tablet
[ 7.971435] usb 1-2: Manufacturer: QEMU 0.10.2
[ 7.975858] usb 1-2: SerialNumber: 1
[ 9.511381] ata2.00: qc timeout (cmd 0xa0)
[ 9.514923] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 9.675770] ata2.00: configured for MWDMA2
[ 10.204455] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4
[ 10.211936] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
[ 14.680417] ata2.00: qc timeout (cmd 0xa0)
[ 14.685010] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 14.690798] ata2.00: limiting speed to MWDMA2:PIO3
[ 14.850811] ata2.00: configured for MWDMA2
[ 19.855357] ata2.00: qc timeout (cmd 0xa0)
[ 19.859931] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 19.865765] ata2.00: disabled
[ 19.869676] ata2: soft resetting link
[ 20.056857] ata2: EH complete
[ 35.712153] ata1: lost interrupt (Status 0x50)
[ 35.722381] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 35.735437] ata1.00: failed command: READ DMA
[ 35.745912] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 35.745913] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 35.777373] ata1.00: status: { DRDY }
[ 35.785709] ata1: soft resetting link
[ 35.946815] ata1.00: configured for MWDMA2
[ 35.955695] ata1.00: device reported invalid CHS sector 0
[ 35.967512] ata1: EH complete
[ 66.784177] ata1: lost interrupt (Status 0x50)
[ 66.788709] ata1.00: limiting speed to MWDMA1:PIO2
[ 66.793395] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 66.799857] ata1.00: failed command: READ DMA
[ 66.804193] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 66.804194] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 66.818098] ata1.00: status: { DRDY }
[ 66.822310] ata1: soft resetting link
[ 66.981440] ata1.00: configured for MWDMA1
[ 66.985550] ata1.00: device reported invalid CHS sector 0
[ 66.990704] ata1: EH complete
[ 97.760172] ata1: lost interrupt (Status 0x50)
[ 97.765465] ata1.00: limiting speed to PIO2
[ 97.770093] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 97.777360] ata1.00: failed command: READ DMA
[ 97.781823] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 97.781824] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 97.795560] ata1.00: status: { DRDY }
[ 97.799269] ata1: soft resetting link
[ 97.957830] ata1.00: configured for PIO2
[ 97.961338] ata1.00: device reported invalid CHS sector 0
[ 97.965874] ata1: EH complete
[ 128.736132] ata1: lost interrupt (Status 0x58)
[ 128.830108] ata1.00: limiting speed to PIO1
[ 128.834274] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 128.840650] ata1.00: failed command: READ MULTIPLE
[ 128.845289] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 128.845291] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 128.859072] ata1.00: status: { DRDY }
[ 128.863253] ata1: soft resetting link
[ 129.022319] ata1.00: configured for PIO1
[ 129.026279] ata1.00: device reported invalid CHS sector 0
[ 129.031398] ata1: EH complete
[ 159.712158] ata1: lost interrupt (Status 0x58)
[ 159.802324] ata1.00: limiting speed to PIO0
[ 159.806496] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 159.812888] ata1.00: failed command: READ MULTIPLE
[ 159.817503] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 159.817505] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 159.831339] ata1.00: status: { DRDY }
[ 159.835482] ata1: soft resetting link
[ 159.994295] ata1.00: configured for PIO0
[ 159.998279] ata1.00: device reported invalid CHS sector 0
[ 160.003401] ata1: EH complete
[ 190.816215] ata1: lost interrupt (Status 0x58)
[ 190.898787] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 190.904509] ata1.00: failed command: READ MULTIPLE
[ 190.908616] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 190.908617] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 190.920911] ata1.00: status: { DRDY }
[ 190.924608] ata1: soft resetting link
[ 191.082728] ata1.00: configured for PIO0
[ 191.086575] ata1.00: device reported invalid CHS sector 0
[ 191.091675] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 191.099098] sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[ 191.108415] Descriptor sense data with sense descriptors (in hex):
[ 191.114713] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 191.130002] 00 00 00 00
[ 191.136199] sd 0:0:0:0: [sda] Add. Sense: No additional sense information
[ 191.143574] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 191.157045] end_request: I/O error, dev sda, sector 0
[ 191.161675] Buffer I/O error on device sda, logical block 0
[ 191.166372] ata1: EH complete
[ 221.792133] ata1: lost interrupt (Status 0x58)
[ 221.875310] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 221.882176] ata1.00: failed command: READ MULTIPLE
[ 221.886834] ata1.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 221.886836] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 221.901648] ata1.00: status: { DRDY }
[ 221.906550] ata1: soft resetting link
[ 222.124783] ata1.00: configured for PIO0
[ 222.127744] ata1.00: device reported invalid CHS sector 0
[ 222.132141] ata1: EH complete
[-- Attachment #3: xen-4.1.1-f16test64hvm-linux-3.1.0-platform-pci-enabled.log --]
[-- Type: text/plain, Size: 24984 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-5.fc16.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.6.1 20111003 (Red Hat 4.6.1-10) (GCC) ) #1 SMP Thu Oct 27 03:46:50 UTC 2011
[ 0.000000] Command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] DMI 2.4 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.1.
[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fbc70] fbc70
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] RAMDISK: 37e7a000 - 3ffdf000
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000fc003400 00040
[ 0.000000] ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000040000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000
[ 0.000000] NODE_DATA [000000003ffec000 - 000000003fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 15 CPUs, 14 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bc000000)
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880037c00000 s81024 r8192 d21376 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 883240k/1048576k available (4867k kernel code, 456k absent, 164880k reserved, 6782k data, 940k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:1208 16
[ 0.000000] Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Detected 2677.276 MHz processor.
[ 0.004999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5354.55 BogoMIPS (lpj=2677276)
[ 0.013004] pid_max: default: 32768 minimum: 301
[ 0.017034] Security Framework initialized
[ 0.020012] SELinux: Initializing.
[ 0.024185] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.031268] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.038112] Mount-cache hash table entries: 256
[ 0.044180] Initializing cgroup subsys cpuacct
[ 0.049006] Initializing cgroup subsys memory
[ 0.053014] Initializing cgroup subsys devices
[ 0.056999] Initializing cgroup subsys freezer
[ 0.062000] Initializing cgroup subsys net_cls
[ 0.066999] Initializing cgroup subsys blkio
[ 0.071004] Initializing cgroup subsys perf_event
[ 0.076071] CPU: Physical Processor ID: 0
[ 0.079997] CPU: Processor Core ID: 0
[ 0.083998] mce: CPU supports 9 MCE banks
[ 0.089138] SMP alternatives: switching to UP code
[ 0.101620] ACPI: Core revision 20110623
[ 0.113856] ftrace: allocating 25204 entries in 99 pages
[ 0.148567] Not enabling x2apic, Intr-remapping init failed.
[ 0.153989] Switched APIC routing to physical flat.
[ 0.161120] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.176622] CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz stepping 05
[ 0.184012] installing Xen timer for CPU 0
[ 0.187040] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
[ 0.194059] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.195003] Brought up 1 CPUs
[ 0.195987] Total of 1 processors activated (5354.55 BogoMIPS).
[ 0.199117] devtmpfs: initialized
[ 0.230082] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.231035] RTC time: 18:20:40, date: 10/31/11
[ 0.232074] NET: Registered protocol family 16
[ 0.235115] ACPI: bus type pci registered
[ 0.239989] PCI: Using configuration type 1 for base access
[ 0.248000] bio: create slab <bio-0> at 0
[ 0.249120] ACPI: Added _OSI(Module Device)
[ 0.249988] ACPI: Added _OSI(Processor Device)
[ 0.251019] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.251988] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.337021] ACPI: Interpreter enabled
[ 0.337978] ACPI: (supports S0 S3 S4 S5)
[ 0.342983] ACPI: Using IOAPIC for interrupt routing
[ 0.886914] ACPI: No dock devices found.
[ 0.887893] HEST: Table not found.
[ 0.888895] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.889977] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.891032] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.891890] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.892890] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.893889] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[ 0.946878] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.946879] * this clock source is slow. Consider trying other clock sources
[ 0.959005] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 1.012889] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 1.906831] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 1.913047] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.918965] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.925873] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 1.931973] xen/balloon: Initialising balloon driver.
[ 1.932738] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 1.933757] xen-balloon: Initialising balloon driver.
[ 1.934926] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.935740] vgaarb: loaded
[ 1.936731] vgaarb: bridge control possible 0000:00:02.0
[ 1.937896] SCSI subsystem initialized
[ 1.938927] usbcore: registered new interface driver usbfs
[ 1.939771] usbcore: registered new interface driver hub
[ 1.940799] usbcore: registered new device driver usb
[ 1.941890] PCI: Using ACPI for IRQ routing
[ 1.945843] NetLabel: Initializing
[ 1.946732] NetLabel: domain hash size = 128
[ 1.947734] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.948768] NetLabel: unlabeled traffic allowed by default
[ 1.949747] Switching to clocksource xen
[ 1.951085] Switched to NOHz mode on CPU #0
[ 1.973062] pnp: PnP ACPI init
[ 1.980265] ACPI: bus type pnp registered
[ 1.990358] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.005868] system 00:02: [io 0x10c0-0x1141] has been reserved
[ 2.019621] system 00:02: [io 0xb044-0xb047] has been reserved
[ 2.035179] system 00:03: [io 0x08a0-0x08a3] has been reserved
[ 2.054489] system 00:03: [io 0x0cc0-0x0ccf] has been reserved
[ 2.070648] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 2.145328] pnp: PnP ACPI: found 12 devices
[ 2.156592] ACPI: ACPI bus type pnp unregistered
[ 2.182889] NET: Registered protocol family 2
[ 2.192696] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.222619] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 2.237754] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.252830] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.268252] TCP reno registered
[ 2.282694] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.305323] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.314751] NET: Registered protocol family 1
[ 2.327035] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 2.340403] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 2.353106] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.368124] Unpacking initramfs...
[ 3.000634] Freeing initrd memory: 132500k freed
[ 3.037083] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.044131] audit: initializing netlink socket (disabled)
[ 3.049789] type=2000 audit(1320085244.797:1): initialized
[ 3.079237] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.092703] VFS: Disk quotas dquot_6.5.2
[ 3.110961] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.122725] msgmni has been set to 1983
[ 3.132377] alg: No test for stdrng (krng)
[ 3.140344] NET: Registered protocol family 38
[ 3.149876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.164511] io scheduler noop registered
[ 3.174275] io scheduler deadline registered
[ 3.184322] io scheduler cfq registered (default)
[ 3.194993] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.214332] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.229680] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.243454] acpiphp: Slot [0] registered
[ 3.253341] acpiphp: Slot [1] registered
[ 3.262621] acpiphp: Slot [2] registered
[ 3.273661] acpiphp: Slot [3] registered
[ 3.283254] acpiphp: Slot [4] registered
[ 3.292918] acpiphp: Slot [5] registered
[ 3.302207] acpiphp: Slot [6] registered
[ 3.310836] acpiphp: Slot [7] registered
[ 3.320223] acpiphp: Slot [8] registered
[ 3.334559] acpiphp: Slot [9] registered
[ 3.342859] acpiphp: Slot [10] registered
[ 3.353368] acpiphp: Slot [11] registered
[ 3.362397] acpiphp: Slot [12] registered
[ 3.371935] acpiphp: Slot [13] registered
[ 3.384052] acpiphp: Slot [14] registered
[ 3.392590] acpiphp: Slot [15] registered
[ 3.404644] acpiphp: Slot [16] registered
[ 3.413333] acpiphp: Slot [17] registered
[ 3.424608] acpiphp: Slot [18] registered
[ 3.435636] acpiphp: Slot [19] registered
[ 3.445201] acpiphp: Slot [20] registered
[ 3.461498] acpiphp: Slot [21] registered
[ 3.470781] acpiphp: Slot [22] registered
[ 3.480989] acpiphp: Slot [23] registered
[ 3.491360] acpiphp: Slot [24] registered
[ 3.500789] acpiphp: Slot [25] registered
[ 3.510470] acpiphp: Slot [26] registered
[ 3.518468] acpiphp: Slot [27] registered
[ 3.527290] acpiphp: Slot [28] registered
[ 3.534022] acpiphp: Slot [29] registered
[ 3.545699] acpiphp: Slot [30] registered
[ 3.553786] acpiphp: Slot [31] registered
[ 3.561598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.579001] ACPI: Power Button [PWRF]
[ 3.586183] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 3.598568] ACPI: Sleep Button [SLPF]
[ 3.666534] ERST: Table is not found!
[ 3.675525] GHES: HEST is not enabled!
[ 3.684103] xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 3.709467] Grant table initialized
[ 3.720211] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.775440] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.824734] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.839434] Non-volatile memory driver v1.3
[ 3.849378] Linux agpgart interface v0.103
[ 3.860863] loop: module loaded
[ 3.870446] scsi0 : ata_piix
[ 3.878405] scsi1 : ata_piix
[ 3.885877] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
[ 3.900343] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
[ 3.917546] Fixed MDIO Bus: probed
[ 3.925950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.940198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.952266] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.973531] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.989527] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 4.001676] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 4.024124] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[ 4.041633] Refined TSC clocksource calibration: 2677.181 MHz.
[ 4.059702] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.074935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.090748] usb usb1: Product: UHCI Host Controller
[ 4.099439] usb usb1: Manufacturer: Linux 3.1.0-5.fc16.x86_64 uhci_hcd
[ 4.113828] usb usb1: SerialNumber: 0000:00:01.2
[ 4.124868] hub 1-0:1.0: USB hub found
[ 4.143311] hub 1-0:1.0: 2 ports detected
[ 4.153270] usbcore: registered new interface driver usbserial
[ 4.163776] USB Serial support registered for generic
[ 4.176772] usbcore: registered new interface driver usbserial_generic
[ 4.191573] usbserial: USB Serial Driver core
[ 4.202112] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.224277] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.234579] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.243591] mousedev: PS/2 mouse device common for all mice
[ 4.266000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.305325] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.320654] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 4.336894] ata2.00: configured for MWDMA2
[ 4.346972] rtc0: alarms up to one day, 114 bytes nvram
[ 4.356267] device-mapper: uevent: version 1.0.3
[ 4.364728] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 4.398637] cpuidle: using governor ladder
[ 4.416798] cpuidle: using governor menu
[ 4.440463] EFI Variables Facility v0.08 2004-May-17
[ 4.455401] usbcore: registered new interface driver usbhid
[ 4.466464] usbhid: USB HID core driver
[ 4.471941] usb 1-2: new full speed USB device number 2 using uhci_hcd
[ 4.479442] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.487208] TCP cubic registered
[ 4.491879] Initializing XFRM netlink socket
[ 4.498196] NET: Registered protocol family 10
[ 4.504427] Mobile IPv6
[ 4.508392] NET: Registered protocol family 17
[ 4.516365] Registering the dns_resolver key type
[ 4.522166] registered taskstats version 1
[ 4.530496] IMA: No TPM chip found, activating TPM-bypass!
[ 4.542259] XENBUS: Device with no driver: device/vfb/0
[ 4.551985] XENBUS: Device with no driver: device/vbd/768
[ 4.557808] XENBUS: Device with no driver: device/vbd/5632
[ 4.563305] XENBUS: Device with no driver: device/vif/0
[ 4.569566] XENBUS: Device with no driver: device/console/0
[ 4.575926] Magic number: 15:535:343
[ 4.582096] tty tty60: hash matches
[ 4.586306] rtc_cmos 00:05: setting system clock to 2011-10-31 18:20:43 UTC (1320085243)
[ 4.597213] Initializing network drop monitor service
[ 4.784955] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 7.954288] usb 1-2: New USB device found, idVendor=0627, idProduct=0001
[ 7.959982] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.965696] usb 1-2: Product: QEMU USB Tablet
[ 7.969472] usb 1-2: Manufacturer: QEMU 0.10.2
[ 7.973301] usb 1-2: SerialNumber: 1
[ 9.346286] ata2.00: qc timeout (cmd 0xa0)
[ 9.350447] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 9.511368] ata2.00: configured for MWDMA2
[ 10.204402] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4
[ 10.220604] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
[ 14.515409] ata2.00: qc timeout (cmd 0xa0)
[ 14.519215] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 14.523777] ata2.00: limiting speed to MWDMA2:PIO3
[ 14.682705] ata2.00: configured for MWDMA2
[ 19.686372] ata2.00: qc timeout (cmd 0xa0)
[ 19.690003] ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
[ 19.694549] ata2.00: disabled
[ 19.697694] ata2: soft resetting link
[ 19.853703] ata2: EH complete
[ 19.857284] Freeing unused kernel memory: 940k freed
[ 19.861651] Write protecting the kernel read-only data: 10240k
[ 19.871213] Freeing unused kernel memory: 1260k freed
[ 19.881542] Freeing unused kernel memory: 1584k freed
[ 19.914218] dracut: dracut-013-16.fc16
[ 19.921618] dracut: root was live:/squashfs.img, liveroot is now live:/squashfs.img
[ 19.937701] udevd[89]: starting version 173
[ 20.067306] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 20.124812] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 20.136542] dracut: Mounted root filesystem /dev/mapper/live-rw
[ 20.166494] dracut: Switching root
[ 20.538986] type=1403 audit(1320085259.451:2): policy loaded auid=4294967295 ses=4294967295
[ 20.551722] systemd[1]: Successfully loaded SELinux policy in 147ms 38us.
[ 20.585152] systemd[1]: Successfully loaded SELinux database in 27ms 524us, size on heap is 475K.
[ 20.636550] systemd[1]: Relabelled /dev and /run in 39ms 368us.
[ 20.646389] systemd[1]: systemd 36 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 20.664870] systemd[1]: No hostname configured.
[ 20.668864] systemd[1]: Initializing machine ID from random generator.
[ 20.730269] systemd[1]: Failed to fully start up daemon: No such file or directory
[ 20.736720] systemd[1]: Cannot add dependency job for unit fedora-wait-storage.service, ignoring: Unit fedora-wait-storage.service failed to load: No such file or directory. See system logs and 'systemctl status fedora-wait-storage.service' for details.
[ 20.753901] systemd[1]: Cannot add dependency job for unit systemd-remount-api-vfs.service, ignoring: Unit systemd-remount-api-vfs.service failed to load: No such file or directory. See system logs and 'systemctl status systemd-remount-api-vfs.service' for details.
[ 20.771807] systemd[1]: Cannot add dependency job for unit fedora-storage-init.service, ignoring: Unit fedora-storage-init.service failed to load: No such file or directory. See system logs and 'systemctl status fedora-storage-init.service' for details.
[ 20.788942] systemd[1]: Cannot add dependency job for unit fedora-readonly.service, ignoring: Unit fedora-readonly.service failed to load: No such file or directory. See system logs and 'systemctl status fedora-readonly.service' for details.
[ 20.805387] systemd[1]: Cannot add dependency job for unit lvm2-monitor.service, ignoring: Unit dm-event.socket failed to load: No such file or directory. See system logs and 'systemctl status dm-event.socket' for details.
[ 20.820446] systemd[1]: Cannot add dependency job for unit avahi-daemon.socket, ignoring: Unit avahi-daemon.socket failed to load: No such file or directory. See system logs and 'systemctl status avahi-daemon.socket' for details.
[ 20.835852] systemd[1]: Cannot add dependency job for unit rpcbind.socket, ignoring: Unit rpcbind.socket failed to load: No such file or directory. See system logs and 'systemctl status rpcbind.socket' for details.
[ 20.861030] systemd[1]: Cannot add dependency job for unit dm-event.socket, ignoring: Unit dm-event.socket failed to load: No such file or directory. See system logs and 'systemctl status dm-event.socket' for details.
[ 20.890039] systemd[1]: Cannot add dependency job for unit iptables.service, ignoring: Unit iptables.service failed to load: No such file or directory. See system logs and 'systemctl status iptables.service' for details.
[ 20.920513] systemd[1]: Cannot add dependency job for unit ip6tables.service, ignoring: Unit ip6tables.service failed to load: No such file or directory. See system logs and 'systemctl status ip6tables.service' for details.
[ 20.973456] systemd-readahead-collect[254]: Disabling readahead collector due to execution in virtualized environment.
[ 21.270214] systemd[1]: fedora-storage-init-late.service: main process exited, code=exited, status=203
[ 21.298485] udevd[271]: starting version 173
[ 21.339731] systemd[1]: Unit fedora-storage-init-late.service entered failed state.
[ 21.503947] systemd-fsck[295]: Root directory is writable, skipping check.
[ 21.653227] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
[ 21.700121] mount[304]: warning: can't open /etc/fstab: No such file or directory
[ 21.765128] systemd-vconsole-setup[298]: /bin/loadkeys failed with error code 1.
[ 21.895550] systemd-vconsole-setup[298]: /bin/setfont failed with error code 1.
[ 21.978459] lvm[294]: No volume groups found
[ 22.094733] systemd-tmpfiles[340]: Successfully loaded SELinux database in 69ms 304us, size on heap is 476K.
[ 22.506681] Initialising Xen virtual ethernet driver.
[ 22.593025] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
[ 22.609176] blkfront: xvda: flush diskcache: enabled
[ 22.648502] xvda: unknown partition table
[ 22.977881] vif vif-0: 2 parsing device/vif/0/mac
[-- Attachment #4: xen-4.1.2-f16test64hvm-linux-3.1.0-platform-pci-disabled.log --]
[-- Type: text/plain, Size: 24576 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-5.fc16.x86_64 (mockbuild@x86-10.phx2.fedoraproject.org) (gcc version 4.6.1 20111003 (Red Hat 4.6.1-10) (GCC) ) #1 SMP Thu Oct 27 03:46:50 UTC 2011
[ 0.000000] Command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] DMI 2.4 present.
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.1.
[ 0.000000] Xen Platform PCI: unrecognised magic value
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fbc70] fbc70
[ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000
[ 0.000000] RAMDISK: 37e7a000 - 3ffdf000
[ 0.000000] ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT 00000000fc0134b0 00034 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP 00000000fc0132d0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT 00000000fc003440 0FE05 (v02 Xen HVM 00000000 INTL 20100528)
[ 0.000000] ACPI: FACS 00000000fc003400 00040
[ 0.000000] ACPI: APIC 00000000fc0133d0 000D8 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000040000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000040000000
[ 0.000000] NODE_DATA [000000003ffec000 - 000000003fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00040000
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 15 CPUs, 14 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bc000000)
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:15 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880037c00000 s81024 r8192 d21376 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257929
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 883240k/1048576k available (4867k kernel code, 456k absent, 164880k reserved, 6782k data, 940k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:1208 16
[ 0.000000] Xen HVM callback vector for event delivery is enabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Detected 2677.244 MHz processor.
[ 0.009999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5354.48 BogoMIPS (lpj=2677244)
[ 0.036006] pid_max: default: 32768 minimum: 301
[ 0.049053] Security Framework initialized
[ 0.060011] SELinux: Initializing.
[ 0.070196] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.086283] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.108126] Mount-cache hash table entries: 256
[ 0.118237] Initializing cgroup subsys cpuacct
[ 0.131007] Initializing cgroup subsys memory
[ 0.143020] Initializing cgroup subsys devices
[ 0.155994] Initializing cgroup subsys freezer
[ 0.168992] Initializing cgroup subsys net_cls
[ 0.185998] Initializing cgroup subsys blkio
[ 0.199003] Initializing cgroup subsys perf_event
[ 0.210117] CPU: Physical Processor ID: 0
[ 0.227983] CPU: Processor Core ID: 0
[ 0.237983] mce: CPU supports 9 MCE banks
[ 0.248169] SMP alternatives: switching to UP code
[ 0.270478] ACPI: Core revision 20110623
[ 0.301144] ftrace: allocating 25204 entries in 99 pages
[ 0.359854] Not enabling x2apic, Intr-remapping init failed.
[ 0.379963] Switched APIC routing to physical flat.
[ 0.395377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.421054] CPU0: Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz stepping 05
[ 0.441969] installing Xen timer for CPU 0
[ 0.460041] Performance Events: unsupported p6 CPU model 37 no PMU driver, software events only.
[ 0.469990] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.470987] Brought up 1 CPUs
[ 0.471952] Total of 1 processors activated (5354.48 BogoMIPS).
[ 0.477079] devtmpfs: initialized
[ 0.543947] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.544994] RTC time: 18:31:27, date: 10/31/11
[ 0.546027] NET: Registered protocol family 16
[ 0.548999] ACPI: bus type pci registered
[ 0.552043] PCI: Using configuration type 1 for base access
[ 0.563016] bio: create slab <bio-0> at 0
[ 0.565020] ACPI: Added _OSI(Module Device)
[ 0.565937] ACPI: Added _OSI(Processor Device)
[ 0.566948] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.567950] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.645984] ACPI: Interpreter enabled
[ 0.646923] ACPI: (supports S0 S3 S4 S5)
[ 0.651923] ACPI: Using IOAPIC for interrupt routing
[ 1.146001] ACPI: No dock devices found.
[ 1.146841] HEST: Table not found.
[ 1.147842] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.148917] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.149962] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.150842] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.151841] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.152841] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
[ 1.192014] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 1.192015] * this clock source is slow. Consider trying other clock sources
[ 1.201900] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 1.241962] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 2.025898] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 2.031953] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 2.037956] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 2.043955] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 2.049869] xen/balloon: Initialising balloon driver.
[ 2.050708] last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 2.051722] xen-balloon: Initialising balloon driver.
[ 2.052853] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.053707] vgaarb: loaded
[ 2.054705] vgaarb: bridge control possible 0000:00:02.0
[ 2.055783] SCSI subsystem initialized
[ 2.056815] usbcore: registered new interface driver usbfs
[ 2.057722] usbcore: registered new interface driver hub
[ 2.058730] usbcore: registered new device driver usb
[ 2.059795] PCI: Using ACPI for IRQ routing
[ 2.062025] NetLabel: Initializing
[ 2.062701] NetLabel: domain hash size = 128
[ 2.063700] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.064721] NetLabel: unlabeled traffic allowed by default
[ 2.065725] Switching to clocksource xen
[ 2.067059] Switched to NOHz mode on CPU #0
[ 2.084009] pnp: PnP ACPI init
[ 2.091041] ACPI: bus type pnp registered
[ 2.099766] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.117529] system 00:02: [io 0x10c0-0x1141] has been reserved
[ 2.130328] system 00:02: [io 0xb044-0xb047] has been reserved
[ 2.144333] system 00:03: [io 0x08a0-0x08a3] has been reserved
[ 2.167610] system 00:03: [io 0x0cc0-0x0ccf] has been reserved
[ 2.181435] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 2.246335] pnp: PnP ACPI: found 12 devices
[ 2.255920] ACPI: ACPI bus type pnp unregistered
[ 2.272417] NET: Registered protocol family 2
[ 2.282943] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.298402] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 2.319541] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.334573] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.351355] TCP reno registered
[ 2.362101] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.376828] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.398645] NET: Registered protocol family 1
[ 2.411609] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 2.428007] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 2.443328] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.460932] Unpacking initramfs...
[ 3.153438] Freeing initrd memory: 132500k freed
[ 3.193642] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 3.210175] audit: initializing netlink socket (disabled)
[ 3.224144] type=2000 audit(1320085891.637:1): initialized
[ 3.269240] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.294091] VFS: Disk quotas dquot_6.5.2
[ 3.305685] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.322563] msgmni has been set to 1983
[ 3.333804] alg: No test for stdrng (krng)
[ 3.345060] NET: Registered protocol family 38
[ 3.369417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.389791] io scheduler noop registered
[ 3.400170] io scheduler deadline registered
[ 3.412652] io scheduler cfq registered (default)
[ 3.434054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.452509] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.467564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.482297] acpiphp: Slot [0] registered
[ 3.498329] acpiphp: Slot [1] registered
[ 3.509545] acpiphp: Slot [2] registered
[ 3.521837] acpiphp: Slot [3] registered
[ 3.535810] acpiphp: Slot [4] registered
[ 3.546618] acpiphp: Slot [5] registered
[ 3.558013] acpiphp: Slot [6] registered
[ 3.569028] acpiphp: Slot [7] registered
[ 3.577378] acpiphp: Slot [8] registered
[ 3.585571] acpiphp: Slot [9] registered
[ 3.594136] acpiphp: Slot [10] registered
[ 3.605047] acpiphp: Slot [11] registered
[ 3.617289] acpiphp: Slot [12] registered
[ 3.635176] acpiphp: Slot [13] registered
[ 3.645500] acpiphp: Slot [14] registered
[ 3.653631] acpiphp: Slot [15] registered
[ 3.662873] acpiphp: Slot [16] registered
[ 3.673800] acpiphp: Slot [17] registered
[ 3.683048] acpiphp: Slot [18] registered
[ 3.695166] acpiphp: Slot [19] registered
[ 3.707294] acpiphp: Slot [20] registered
[ 3.719412] acpiphp: Slot [21] registered
[ 3.733379] acpiphp: Slot [22] registered
[ 3.743860] acpiphp: Slot [23] registered
[ 3.753505] acpiphp: Slot [24] registered
[ 3.761528] acpiphp: Slot [25] registered
[ 3.772585] acpiphp: Slot [26] registered
[ 3.779635] acpiphp: Slot [27] registered
[ 3.787641] acpiphp: Slot [28] registered
[ 3.803456] acpiphp: Slot [29] registered
[ 3.811555] acpiphp: Slot [30] registered
[ 3.822066] acpiphp: Slot [31] registered
[ 3.830693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.843044] ACPI: Power Button [PWRF]
[ 3.848869] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 3.858744] ACPI: Sleep Button [SLPF]
[ 3.914683] ERST: Table is not found!
[ 3.919555] GHES: HEST is not enabled!
[ 3.925848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.971082] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.017938] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.025223] Non-volatile memory driver v1.3
[ 4.031615] Linux agpgart interface v0.103
[ 4.044197] loop: module loaded
[ 4.056103] scsi0 : ata_piix
[ 4.064587] scsi1 : ata_piix
[ 4.070221] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc120 irq 14
[ 4.079404] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc128 irq 15
[ 4.090982] Fixed MDIO Bus: probed
[ 4.100125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.110214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.119711] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.131711] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.144448] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 4.157176] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 4.169978] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c100
[ 4.185559] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.196823] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.210203] usb usb1: Product: UHCI Host Controller
[ 4.218714] usb usb1: Manufacturer: Linux 3.1.0-5.fc16.x86_64 uhci_hcd
[ 4.234499] usb usb1: SerialNumber: 0000:00:01.2
[ 4.243426] Refined TSC clocksource calibration: 2677.181 MHz.
[ 4.254583] hub 1-0:1.0: USB hub found
[ 4.260973] hub 1-0:1.0: 2 ports detected
[ 4.270658] usbcore: registered new interface driver usbserial
[ 4.281673] USB Serial support registered for generic
[ 4.290221] usbcore: registered new interface driver usbserial_generic
[ 4.306771] usbserial: USB Serial Driver core
[ 4.319613] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.337869] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.346917] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.356592] mousedev: PS/2 mouse device common for all mice
[ 4.369511] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.390238] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.400963] rtc0: alarms up to one day, 114 bytes nvram
[ 4.411174] device-mapper: uevent: version 1.0.3
[ 4.419520] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 4.434994] cpuidle: using governor ladder
[ 4.443631] cpuidle: using governor menu
[ 4.450955] EFI Variables Facility v0.08 2004-May-17
[ 4.465752] usbcore: registered new interface driver usbhid
[ 4.476575] usbhid: USB HID core driver
[ 4.489789] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.500777] TCP cubic registered
[ 4.512424] Initializing XFRM netlink socket
[ 4.524175] NET: Registered protocol family 10
[ 4.555973] Mobile IPv6
[ 4.563289] NET: Registered protocol family 17
[ 4.590928] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100
[ 4.603485] ata1.00: 62914560 sectors, multi 16: LBA48
[ 4.612965] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 4.627911] ata2.00: configured for MWDMA2
[ 4.642096] Registering the dns_resolver key type
[ 4.661460] ata1.00: configured for MWDMA2
[ 4.670193] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5
[ 4.685673] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.697488] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
[ 4.714448] sd 0:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 4.734544] registered taskstats version 1
[ 4.744923] IMA: No TPM chip found, activating TPM-bypass!
[ 4.756015] Magic number: 15:741:545
[ 4.761907] rtc_cmos 00:05: setting system clock to 2011-10-31 18:31:31 UTC (1320085891)
[ 4.771881] Initializing network drop monitor service
[ 4.781501] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 4.789242] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.805026] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.811640] usb 1-2: new full speed USB device number 2 using uhci_hcd
[ 4.820549] sd 0:0:0:0: [sda] Write Protect is off
[ 4.827544] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.843720] sda: unknown partition table
[ 4.849601] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.856223] Freeing unused kernel memory: 940k freed
[ 4.862917] Write protecting the kernel read-only data: 10240k
[ 4.878993] Freeing unused kernel memory: 1260k freed
[ 4.903033] Freeing unused kernel memory: 1584k freed
[ 4.955884] dracut: dracut-013-16.fc16
[ 4.970221] dracut: root was live:/squashfs.img, liveroot is now live:/squashfs.img
[ 4.996561] udevd[91]: starting version 173
[ 5.038989] usb 1-2: New USB device found, idVendor=0627, idProduct=0001
[ 5.051977] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.073198] usb 1-2: Product: QEMU USB Tablet
[ 5.081687] usb 1-2: Manufacturer: QEMU 0.10.2
[ 5.090037] usb 1-2: SerialNumber: 1
[ 5.106364] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 5.207463] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4
[ 5.261120] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
[ 5.652656] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.723242] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.738022] dracut: Mounted root filesystem /dev/mapper/live-rw
[ 5.790468] dracut: Switching root
[ 6.269951] type=1403 audit(1320085893.007:2): policy loaded auid=4294967295 ses=4294967295
[ 6.284896] systemd[1]: Successfully loaded SELinux policy in 175ms 109us.
[ 6.324879] systemd[1]: Successfully loaded SELinux database in 31ms 773us, size on heap is 475K.
[ 6.385001] systemd[1]: Relabelled /dev and /run in 45ms 812us.
[ 6.396418] systemd[1]: systemd 36 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 6.418068] systemd[1]: No hostname configured.
[ 6.423046] systemd[1]: Initializing machine ID from random generator.
[ 6.492643] systemd[1]: Failed to fully start up daemon: No such file or directory
[ 6.511686] systemd[1]: Cannot add dependency job for unit fedora-wait-storage.service, ignoring: Unit fedora-wait-storage.service failed to load: No such file or directory. See system logs and 'systemctl status fedora-wait-storage.service' for details.
[ 6.571435] systemd[1]: Cannot add dependency job for unit systemd-remount-api-vfs.service, ignoring: Unit systemd-remount-api-vfs.service failed to load: No such file or directory. See system logs and 'systemctl status systemd-remount-api-vfs.service' for details.
[ 6.623918] systemd[1]: Cannot add dependency job for unit fedora-storage-init.service, ignoring: Unit fedora-storage-init.service failed to load: No such file or directory. See system logs and 'systemctl status fedora-storage-init.service' for details.
[ 6.653173] systemd[1]: Cannot add dependency job for unit fedora-readonly.service, ignoring: Unit fedora-readonly.service failed to load: No such file or directory. See system logs and 'systemctl status fedora-readonly.service' for details.
[ 6.705570] systemd[1]: Cannot add dependency job for unit lvm2-monitor.service, ignoring: Unit dm-event.socket failed to load: No such file or directory. See system logs and 'systemctl status dm-event.socket' for details.
[ 6.754188] systemd[1]: Cannot add dependency job for unit avahi-daemon.socket, ignoring: Unit avahi-daemon.socket failed to load: No such file or directory. See system logs and 'systemctl status avahi-daemon.socket' for details.
[ 6.816406] systemd[1]: Cannot add dependency job for unit rpcbind.socket, ignoring: Unit rpcbind.socket failed to load: No such file or directory. See system logs and 'systemctl status rpcbind.socket' for details.
[ 6.865606] systemd[1]: Cannot add dependency job for unit dm-event.socket, ignoring: Unit dm-event.socket failed to load: No such file or directory. See system logs and 'systemctl status dm-event.socket' for details.
[ 6.913090] systemd[1]: Cannot add dependency job for unit iptables.service, ignoring: Unit iptables.service failed to load: No such file or directory. See system logs and 'systemctl status iptables.service' for details.
[ 6.955579] systemd[1]: Cannot add dependency job for unit ip6tables.service, ignoring: Unit ip6tables.service failed to load: No such file or directory. See system logs and 'systemctl status ip6tables.service' for details.
[ 7.012440] systemd-readahead-collect[333]: Disabling readahead collector due to execution in virtualized environment.
[ 7.386262] systemd[1]: fedora-storage-init-late.service: main process exited, code=exited, status=203
[ 7.443655] udevd[350]: starting version 173
[ 7.516084] systemd[1]: Unit fedora-storage-init-late.service entered failed state.
[ 7.761565] systemd-fsck[413]: Root directory is writable, skipping check.
[ 7.906119] systemd-vconsole-setup[417]: /bin/loadkeys failed with error code 1.
[ 7.949179] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,acl,barrier=1,data=ordered
[ 7.982573] systemd-vconsole-setup[417]: /bin/setfont failed with error code 1.
[ 8.047026] mount[422]: warning: can't open /etc/fstab: No such file or directory
[ 8.109546] lvm[412]: No volume groups found
[ 8.284843] systemd-tmpfiles[441]: Successfully loaded SELinux database in 35ms 444us, size on heap is 476K.
[ 8.540772] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 9.353982] 8139cp 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 9.560432] 8139cp 0000:00:03.0: eth0: RTL-8139C+ at 0xffffc90000a30000, 00:16:3f:03:01:14, IRQ 28
[ 9.662977] 8139too: 8139too Fast Ethernet driver 0.9.28
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next reply other threads:[~2011-10-31 18:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-31 18:22 Pasi Kärkkäinen [this message]
2011-11-27 1:53 ` Xen 4.1.1 HVM guest cdrom trouble, lost interrupts, ata failed commands (frozen) sandr8
2011-11-28 10:19 ` Stefano Stabellini
2011-11-28 12:45 ` Pasi Kärkkäinen
2011-11-28 13:50 ` Stefano Stabellini
2011-11-28 12:44 ` Pasi Kärkkäinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111031182220.GZ12984@reaktio.net \
--to=pasik@iki.fi \
--cc=xen-devel@lists.xensource.com \
--cc=xen@lists.fedoraproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.