From: Alan Cox <alan@lxorguk.ukuu.org.uk>
To: airlied@linux.ie, dri-devel@lists.freedesktop.org
Subject: [PATCH 04/12] gma500: introduce the framebuffer support code
Date: Thu, 03 Nov 2011 18:21:20 +0000 [thread overview]
Message-ID: <20111103182120.29503.78911.stgit@bob.linux.org.uk> (raw)
In-Reply-To: <20111103182046.29503.60288.stgit@bob.linux.org.uk>
From: Alan Cox <alan@linux.intel.com>
We support 2D acceleration on some devices but we try and do tricks with
the GTT as a starting point as this is far faster. The GTT logic could be
improved further but for most display sizes it already makes a pretty good
decision.
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/gpu/drm/gma500/accel_2d.c | 362 ++++++++++++++++
drivers/gpu/drm/gma500/framebuffer.c | 784 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/gma500/framebuffer.h | 48 ++
3 files changed, 1194 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpu/drm/gma500/accel_2d.c
create mode 100644 drivers/gpu/drm/gma500/framebuffer.c
create mode 100644 drivers/gpu/drm/gma500/framebuffer.h
diff --git a/drivers/gpu/drm/gma500/accel_2d.c b/drivers/gpu/drm/gma500/accel_2d.c
new file mode 100644
index 0000000..305e6f9
--- /dev/null
+++ b/drivers/gpu/drm/gma500/accel_2d.c
@@ -0,0 +1,362 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ **************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "framebuffer.h"
+
+/**
+ * psb_spank - reset the 2D engine
+ * @dev_priv: our PSB DRM device
+ *
+ * Soft reset the graphics engine and then reload the necessary registers.
+ * We use this at initialisation time but it will become relevant for
+ * accelerated X later
+ */
+void psb_spank(struct drm_psb_private *dev_priv)
+{
+ PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET |
+ _PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET |
+ _PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET |
+ _PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET);
+ PSB_RSGX32(PSB_CR_SOFT_RESET);
+
+ msleep(1);
+
+ PSB_WSGX32(0, PSB_CR_SOFT_RESET);
+ wmb();
+ PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT,
+ PSB_CR_BIF_CTRL);
+ wmb();
+ (void) PSB_RSGX32(PSB_CR_BIF_CTRL);
+
+ msleep(1);
+ PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT,
+ PSB_CR_BIF_CTRL);
+ (void) PSB_RSGX32(PSB_CR_BIF_CTRL);
+ PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
+}
+
+/**
+ * psb2_2d_wait_available - wait for FIFO room
+ * @dev_priv: our DRM device
+ * @size: size (in dwords) of the command we want to issue
+ *
+ * Wait until there is room to load the FIFO with our data. If the
+ * device is not responding then reset it
+ */
+static int psb_2d_wait_available(struct drm_psb_private *dev_priv,
+ unsigned size)
+{
+ uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
+ unsigned long t = jiffies + HZ;
+
+ while (avail < size) {
+ avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
+ if (time_after(jiffies, t)) {
+ psb_spank(dev_priv);
+ return -EIO;
+ }
+ }
+ return 0;
+}
+
+/**
+ * psb_2d_submit - submit a 2D command
+ * @dev_priv: our DRM device
+ * @cmdbuf: command to issue
+ * @size: length (in dwords)
+ *
+ * Issue one or more 2D commands to the accelerator. This needs to be
+ * serialized later when we add the GEM interfaces for acceleration
+ */
+static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf,
+ unsigned size)
+{
+ int ret = 0;
+ int i;
+ unsigned submit_size;
+
+ mutex_lock(&dev_priv->mutex_2d);
+ while (size > 0) {
+ submit_size = (size < 0x60) ? size : 0x60;
+ size -= submit_size;
+ ret = psb_2d_wait_available(dev_priv, submit_size);
+ if (ret)
+ break;
+
+ submit_size <<= 2;
+
+ for (i = 0; i < submit_size; i += 4)
+ PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i);
+
+ (void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4);
+ }
+ mutex_unlock(&dev_priv->mutex_2d);
+ return ret;
+}
+
+
+/**
+ * psb_accel_2d_copy_direction - compute blit order
+ * @xdir: X direction of move
+ * @ydir: Y direction of move
+ *
+ * Compute the correct order setings to ensure that an overlapping blit
+ * correctly copies all the pixels.
+ */
+static u32 psb_accel_2d_copy_direction(int xdir, int ydir)
+{
+ if (xdir < 0)
+ return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL :
+ PSB_2D_COPYORDER_TR2BL;
+ else
+ return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR :
+ PSB_2D_COPYORDER_TL2BR;
+}
+
+/**
+ * psb_accel_2d_copy - accelerated 2D copy
+ * @dev_priv: our DRM device
+ * @src_offset in bytes
+ * @src_stride in bytes
+ * @src_format psb 2D format defines
+ * @dst_offset in bytes
+ * @dst_stride in bytes
+ * @dst_format psb 2D format defines
+ * @src_x offset in pixels
+ * @src_y offset in pixels
+ * @dst_x offset in pixels
+ * @dst_y offset in pixels
+ * @size_x of the copied area
+ * @size_y of the copied area
+ *
+ * Format and issue a 2D accelerated copy command.
+ */
+static int psb_accel_2d_copy(struct drm_psb_private *dev_priv,
+ uint32_t src_offset, uint32_t src_stride,
+ uint32_t src_format, uint32_t dst_offset,
+ uint32_t dst_stride, uint32_t dst_format,
+ uint16_t src_x, uint16_t src_y,
+ uint16_t dst_x, uint16_t dst_y,
+ uint16_t size_x, uint16_t size_y)
+{
+ uint32_t blit_cmd;
+ uint32_t buffer[10];
+ uint32_t *buf;
+ uint32_t direction;
+
+ buf = buffer;
+
+ direction =
+ psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y);
+
+ if (direction == PSB_2D_COPYORDER_BR2TL ||
+ direction == PSB_2D_COPYORDER_TR2BL) {
+ src_x += size_x - 1;
+ dst_x += size_x - 1;
+ }
+ if (direction == PSB_2D_COPYORDER_BR2TL ||
+ direction == PSB_2D_COPYORDER_BL2TR) {
+ src_y += size_y - 1;
+ dst_y += size_y - 1;
+ }
+
+ blit_cmd =
+ PSB_2D_BLIT_BH |
+ PSB_2D_ROT_NONE |
+ PSB_2D_DSTCK_DISABLE |
+ PSB_2D_SRCCK_DISABLE |
+ PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction;
+
+ *buf++ = PSB_2D_FENCE_BH;
+ *buf++ =
+ PSB_2D_DST_SURF_BH | dst_format | (dst_stride <<
+ PSB_2D_DST_STRIDE_SHIFT);
+ *buf++ = dst_offset;
+ *buf++ =
+ PSB_2D_SRC_SURF_BH | src_format | (src_stride <<
+ PSB_2D_SRC_STRIDE_SHIFT);
+ *buf++ = src_offset;
+ *buf++ =
+ PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) |
+ (src_y << PSB_2D_SRCOFF_YSTART_SHIFT);
+ *buf++ = blit_cmd;
+ *buf++ =
+ (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y <<
+ PSB_2D_DST_YSTART_SHIFT);
+ *buf++ =
+ (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y <<
+ PSB_2D_DST_YSIZE_SHIFT);
+ *buf++ = PSB_2D_FLUSH_BH;
+
+ return psbfb_2d_submit(dev_priv, buffer, buf - buffer);
+}
+
+/**
+ * psbfb_copyarea_accel - copyarea acceleration for /dev/fb
+ * @info: our framebuffer
+ * @a: copyarea parameters from the framebuffer core
+ *
+ * Perform a 2D copy via the accelerator
+ */
+static void psbfb_copyarea_accel(struct fb_info *info,
+ const struct fb_copyarea *a)
+{
+ struct psb_fbdev *fbdev = info->par;
+ struct psb_framebuffer *psbfb = &fbdev->pfb;
+ struct drm_device *dev = psbfb->base.dev;
+ struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ uint32_t offset;
+ uint32_t stride;
+ uint32_t src_format;
+ uint32_t dst_format;
+
+ if (!fb)
+ return;
+
+ offset = psbfb->gtt->offset;
+ stride = fb->pitch;
+
+ switch (fb->depth) {
+ case 8:
+ src_format = PSB_2D_SRC_332RGB;
+ dst_format = PSB_2D_DST_332RGB;
+ break;
+ case 15:
+ src_format = PSB_2D_SRC_555RGB;
+ dst_format = PSB_2D_DST_555RGB;
+ break;
+ case 16:
+ src_format = PSB_2D_SRC_565RGB;
+ dst_format = PSB_2D_DST_565RGB;
+ break;
+ case 24:
+ case 32:
+ /* this is wrong but since we don't do blending its okay */
+ src_format = PSB_2D_SRC_8888ARGB;
+ dst_format = PSB_2D_DST_8888ARGB;
+ break;
+ default:
+ /* software fallback */
+ cfb_copyarea(info, a);
+ return;
+ }
+
+ if (!gma_power_begin(dev, false)) {
+ cfb_copyarea(info, a);
+ return;
+ }
+ psb_accel_2d_copy(dev_priv,
+ offset, stride, src_format,
+ offset, stride, dst_format,
+ a->sx, a->sy, a->dx, a->dy, a->width, a->height);
+ gma_power_end(dev);
+}
+
+/**
+ * psbfb_copyarea - 2D copy interface
+ * @info: our framebuffer
+ * @region: region to copy
+ *
+ * Copy an area of the framebuffer console either by the accelerator
+ * or directly using the cfb helpers according to the request
+ */
+void psbfb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *region)
+{
+ if (unlikely(info->state != FBINFO_STATE_RUNNING))
+ return;
+
+ /* Avoid the 8 pixel erratum */
+ if (region->width == 8 || region->height == 8 ||
+ (info->flags & FBINFO_HWACCEL_DISABLED))
+ return cfb_copyarea(info, region);
+
+ psbfb_copyarea_accel(info, region);
+}
+
+/**
+ * psbfb_sync - synchronize 2D
+ * @info: our framebuffer
+ *
+ * Wait for the 2D engine to quiesce so that we can do CPU
+ * access to the framebuffer again
+ */
+int psbfb_sync(struct fb_info *info)
+{
+ struct psb_fbdev *fbdev = info->par;
+ struct psb_framebuffer *psbfb = &fbdev->pfb;
+ struct drm_device *dev = psbfb->base.dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ unsigned long _end = jiffies + DRM_HZ;
+ int busy = 0;
+
+ mutex_lock(&dev_priv->mutex_2d);
+ /*
+ * First idle the 2D engine.
+ */
+
+ if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) &&
+ ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0))
+ goto out;
+
+ do {
+ busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
+ cpu_relax();
+ } while (busy && !time_after_eq(jiffies, _end));
+
+ if (busy)
+ busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
+ if (busy)
+ goto out;
+
+ do {
+ busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
+ _PSB_C2B_STATUS_BUSY) != 0);
+ cpu_relax();
+ } while (busy && !time_after_eq(jiffies, _end));
+ if (busy)
+ busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
+ _PSB_C2B_STATUS_BUSY) != 0);
+
+out:
+ mutex_unlock(&dev_priv->mutex_2d);
+ return (busy) ? -EBUSY : 0;
+}
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
new file mode 100644
index 0000000..61ed7b2
--- /dev/null
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -0,0 +1,784 @@
+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_drv.h"
+#include "framebuffer.h"
+
+static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb);
+static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+ struct drm_file *file_priv,
+ unsigned int *handle);
+
+static const struct drm_framebuffer_funcs psb_fb_funcs = {
+ .destroy = psb_user_framebuffer_destroy,
+ .create_handle = psb_user_framebuffer_create_handle,
+};
+
+#define CMAP_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16)
+
+static int psbfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ struct fb_info *info)
+{
+ struct psb_fbdev *fbdev = info->par;
+ struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
+ uint32_t v;
+
+ if (!fb)
+ return -ENOMEM;
+
+ if (regno > 255)
+ return 1;
+
+ red = CMAP_TOHW(red, info->var.red.length);
+ blue = CMAP_TOHW(blue, info->var.blue.length);
+ green = CMAP_TOHW(green, info->var.green.length);
+ transp = CMAP_TOHW(transp, info->var.transp.length);
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ if (regno < 16) {
+ switch (fb->bits_per_pixel) {
+ case 16:
+ ((uint32_t *) info->pseudo_palette)[regno] = v;
+ break;
+ case 24:
+ case 32:
+ ((uint32_t *) info->pseudo_palette)[regno] = v;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+
+void psbfb_suspend(struct drm_device *dev)
+{
+ struct drm_framebuffer *fb = 0;
+ struct psb_framebuffer *psbfb = to_psb_fb(fb);
+
+ console_lock();
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+ struct fb_info *info = psbfb->fbdev;
+ fb_set_suspend(info, 1);
+ drm_fb_helper_blank(FB_BLANK_POWERDOWN, info);
+ }
+ mutex_unlock(&dev->mode_config.mutex);
+ console_unlock();
+}
+
+void psbfb_resume(struct drm_device *dev)
+{
+ struct drm_framebuffer *fb = 0;
+ struct psb_framebuffer *psbfb = to_psb_fb(fb);
+
+ console_lock();
+ mutex_lock(&dev->mode_config.mutex);
+ list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+ struct fb_info *info = psbfb->fbdev;
+ fb_set_suspend(info, 0);
+ drm_fb_helper_blank(FB_BLANK_UNBLANK, info);
+ }
+ mutex_unlock(&dev->mode_config.mutex);
+ console_unlock();
+ drm_helper_disable_unused_functions(dev);
+}
+
+static int psbfb_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct psb_framebuffer *psbfb = vma->vm_private_data;
+ struct drm_device *dev = psbfb->base.dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ int page_num;
+ int i;
+ unsigned long address;
+ int ret;
+ unsigned long pfn;
+ /* FIXME: assumes fb at stolen base which may not be true */
+ unsigned long phys_addr = (unsigned long)dev_priv->stolen_base;
+
+ page_num = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+ address = (unsigned long)vmf->virtual_address;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ for (i = 0; i < page_num; i++) {
+ pfn = (phys_addr >> PAGE_SHIFT);
+
+ ret = vm_insert_mixed(vma, address, pfn);
+ if (unlikely((ret == -EBUSY) || (ret != 0 && i > 0)))
+ break;
+ else if (unlikely(ret != 0)) {
+ ret = (ret == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
+ return ret;
+ }
+ address += PAGE_SIZE;
+ phys_addr += PAGE_SIZE;
+ }
+ return VM_FAULT_NOPAGE;
+}
+
+static void psbfb_vm_open(struct vm_area_struct *vma)
+{
+}
+
+static void psbfb_vm_close(struct vm_area_struct *vma)
+{
+}
+
+static struct vm_operations_struct psbfb_vm_ops = {
+ .fault = psbfb_vm_fault,
+ .open = psbfb_vm_open,
+ .close = psbfb_vm_close
+};
+
+static int psbfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct psb_fbdev *fbdev = info->par;
+ struct psb_framebuffer *psbfb = &fbdev->pfb;
+
+ if (vma->vm_pgoff != 0)
+ return -EINVAL;
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+ return -EINVAL;
+
+ if (!psbfb->addr_space)
+ psbfb->addr_space = vma->vm_file->f_mapping;
+ /*
+ * If this is a GEM object then info->screen_base is the virtual
+ * kernel remapping of the object. FIXME: Review if this is
+ * suitable for our mmap work
+ */
+ vma->vm_ops = &psbfb_vm_ops;
+ vma->vm_private_data = (void *)psbfb;
+ vma->vm_flags |= VM_RESERVED | VM_IO |
+ VM_MIXEDMAP | VM_DONTEXPAND;
+ return 0;
+}
+
+static int psbfb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ return -ENOTTY;
+}
+
+static struct fb_ops psbfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcolreg = psbfb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = psbfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_mmap = psbfb_mmap,
+ .fb_sync = psbfb_sync,
+ .fb_ioctl = psbfb_ioctl,
+};
+
+static struct fb_ops psbfb_unaccel_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = drm_fb_helper_check_var,
+ .fb_set_par = drm_fb_helper_set_par,
+ .fb_blank = drm_fb_helper_blank,
+ .fb_setcolreg = psbfb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_mmap = psbfb_mmap,
+ .fb_ioctl = psbfb_ioctl,
+};
+
+/**
+ * psb_framebuffer_init - initialize a framebuffer
+ * @dev: our DRM device
+ * @fb: framebuffer to set up
+ * @mode_cmd: mode description
+ * @gt: backing object
+ *
+ * Configure and fill in the boilerplate for our frame buffer. Return
+ * 0 on success or an error code if we fail.
+ */
+static int psb_framebuffer_init(struct drm_device *dev,
+ struct psb_framebuffer *fb,
+ struct drm_mode_fb_cmd *mode_cmd,
+ struct gtt_range *gt)
+{
+ int ret;
+
+ if (mode_cmd->pitch & 63)
+ return -EINVAL;
+ switch (mode_cmd->bpp) {
+ case 8:
+ case 16:
+ case 24:
+ case 32:
+ break;
+ default:
+ return -EINVAL;
+ }
+ ret = drm_framebuffer_init(dev, &fb->base, &psb_fb_funcs);
+ if (ret) {
+ dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
+ return ret;
+ }
+ drm_helper_mode_fill_fb_struct(&fb->base, mode_cmd);
+ fb->gtt = gt;
+ return 0;
+}
+
+/**
+ * psb_framebuffer_create - create a framebuffer backed by gt
+ * @dev: our DRM device
+ * @mode_cmd: the description of the requested mode
+ * @gt: the backing object
+ *
+ * Create a framebuffer object backed by the gt, and fill in the
+ * boilerplate required
+ *
+ * TODO: review object references
+ */
+
+static struct drm_framebuffer *psb_framebuffer_create
+ (struct drm_device *dev,
+ struct drm_mode_fb_cmd *mode_cmd,
+ struct gtt_range *gt)
+{
+ struct psb_framebuffer *fb;
+ int ret;
+
+ fb = kzalloc(sizeof(*fb), GFP_KERNEL);
+ if (!fb)
+ return ERR_PTR(-ENOMEM);
+
+ ret = psb_framebuffer_init(dev, fb, mode_cmd, gt);
+ if (ret) {
+ kfree(fb);
+ return ERR_PTR(ret);
+ }
+ return &fb->base;
+}
+
+/**
+ * psbfb_alloc - allocate frame buffer memory
+ * @dev: the DRM device
+ * @aligned_size: space needed
+ *
+ * Allocate the frame buffer. In the usual case we get a GTT range that
+ * is stolen memory backed and life is simple. If there isn't sufficient
+ * stolen memory or the system has no stolen memory we allocate a range
+ * and back it with a GEM object.
+ *
+ * In this case the GEM object has no handle.
+ *
+ * FIXME: console speed up - allocate twice the space if room and use
+ * hardware scrolling for acceleration.
+ */
+static struct gtt_range *psbfb_alloc(struct drm_device *dev, int aligned_size)
+{
+ struct gtt_range *backing;
+ /* Begin by trying to use stolen memory backing */
+ backing = psb_gtt_alloc_range(dev, aligned_size, "fb", 1);
+ if (backing) {
+ if (drm_gem_private_object_init(dev,
+ &backing->gem, aligned_size) == 0)
+ return backing;
+ psb_gtt_free_range(dev, backing);
+ }
+ /* Next try using GEM host memory */
+ backing = psb_gtt_alloc_range(dev, aligned_size, "fb(gem)", 0);
+ if (backing == NULL)
+ return NULL;
+
+ /* Now back it with an object */
+ if (drm_gem_object_init(dev, &backing->gem, aligned_size) != 0) {
+ psb_gtt_free_range(dev, backing);
+ return NULL;
+ }
+ return backing;
+}
+
+/**
+ * psbfb_create - create a framebuffer
+ * @fbdev: the framebuffer device
+ * @sizes: specification of the layout
+ *
+ * Create a framebuffer to the specifications provided
+ */
+static int psbfb_create(struct psb_fbdev *fbdev,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct drm_device *dev = fbdev->psb_fb_helper.dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct fb_info *info;
+ struct drm_framebuffer *fb;
+ struct psb_framebuffer *psbfb = &fbdev->pfb;
+ struct drm_mode_fb_cmd mode_cmd;
+ struct device *device = &dev->pdev->dev;
+ int size;
+ int ret;
+ struct gtt_range *backing;
+
+ mode_cmd.width = sizes->surface_width;
+ mode_cmd.height = sizes->surface_height;
+ mode_cmd.bpp = sizes->surface_bpp;
+
+ /* No 24bit packed */
+ if (mode_cmd.bpp == 24)
+ mode_cmd.bpp = 32;
+
+ /* HW requires pitch to be 64 byte aligned */
+ mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 7) / 8), 64);
+ mode_cmd.depth = sizes->surface_depth;
+
+ size = mode_cmd.pitch * mode_cmd.height;
+ size = ALIGN(size, PAGE_SIZE);
+
+ /* Allocate the framebuffer in the GTT with stolen page backing */
+ backing = psbfb_alloc(dev, size);
+ if (backing == NULL)
+ return -ENOMEM;
+
+ mutex_lock(&dev->struct_mutex);
+
+ info = framebuffer_alloc(0, device);
+ if (!info) {
+ ret = -ENOMEM;
+ goto out_err1;
+ }
+ info->par = fbdev;
+
+ ret = psb_framebuffer_init(dev, psbfb, &mode_cmd, backing);
+ if (ret)
+ goto out_unref;
+
+ fb = &psbfb->base;
+ psbfb->fbdev = info;
+
+ fbdev->psb_fb_helper.fb = fb;
+ fbdev->psb_fb_helper.fbdev = info;
+
+ strcpy(info->fix.id, "psbfb");
+
+ info->flags = FBINFO_DEFAULT;
+ /* No 2D engine */
+ if (!dev_priv->ops->accel_2d)
+ info->fbops = &psbfb_unaccel_ops;
+ else
+ info->fbops = &psbfb_ops;
+
+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
+ if (ret) {
+ ret = -ENOMEM;
+ goto out_unref;
+ }
+
+ info->fix.smem_start = dev->mode_config.fb_base;
+ info->fix.smem_len = size;
+
+ if (backing->stolen) {
+ /* Accessed stolen memory directly */
+ info->screen_base = (char *)dev_priv->vram_addr +
+ backing->offset;
+ } else {
+ /* Pin the pages into the GTT and create a mapping to them */
+ psb_gtt_pin(backing);
+ info->screen_base = vm_map_ram(backing->pages, backing->npage,
+ -1, PAGE_KERNEL);
+ if (info->screen_base == NULL) {
+ psb_gtt_unpin(backing);
+ ret = -ENOMEM;
+ goto out_unref;
+ }
+ psbfb->vm_map = 1;
+ }
+ info->screen_size = size;
+
+ if (dev_priv->gtt.stolen_size) {
+ info->apertures = alloc_apertures(1);
+ if (!info->apertures) {
+ ret = -ENOMEM;
+ goto out_unref;
+ }
+ info->apertures->ranges[0].base = dev->mode_config.fb_base;
+ info->apertures->ranges[0].size = dev_priv->gtt.stolen_size;
+ }
+
+ drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
+ drm_fb_helper_fill_var(info, &fbdev->psb_fb_helper,
+ sizes->fb_width, sizes->fb_height);
+
+ info->fix.mmio_start = pci_resource_start(dev->pdev, 0);
+ info->fix.mmio_len = pci_resource_len(dev->pdev, 0);
+
+ info->pixmap.size = 64 * 1024;
+ info->pixmap.buf_align = 8;
+ info->pixmap.access_align = 32;
+ info->pixmap.flags = FB_PIXMAP_SYSTEM;
+ info->pixmap.scan_align = 1;
+
+ dev_info(dev->dev, "allocated %dx%d fb\n",
+ psbfb->base.width, psbfb->base.height);
+
+ mutex_unlock(&dev->struct_mutex);
+ return 0;
+out_unref:
+ if (backing->stolen)
+ psb_gtt_free_range(dev, backing);
+ else {
+ if (psbfb->vm_map)
+ vm_unmap_ram(info->screen_base, backing->npage);
+ drm_gem_object_unreference(&backing->gem);
+ }
+out_err1:
+ mutex_unlock(&dev->struct_mutex);
+ psb_gtt_free_range(dev, backing);
+ return ret;
+}
+
+/**
+ * psb_user_framebuffer_create - create framebuffer
+ * @dev: our DRM device
+ * @filp: client file
+ * @cmd: mode request
+ *
+ * Create a new framebuffer backed by a userspace GEM object
+ */
+static struct drm_framebuffer *psb_user_framebuffer_create
+ (struct drm_device *dev, struct drm_file *filp,
+ struct drm_mode_fb_cmd *cmd)
+{
+ struct gtt_range *r;
+ struct drm_gem_object *obj;
+
+ /*
+ * Find the GEM object and thus the gtt range object that is
+ * to back this space
+ */
+ obj = drm_gem_object_lookup(dev, filp, cmd->handle);
+ if (obj == NULL)
+ return ERR_PTR(-ENOENT);
+
+ /* Let the core code do all the work */
+ r = container_of(obj, struct gtt_range, gem);
+ return psb_framebuffer_create(dev, cmd, r);
+}
+
+static void psbfb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, int regno)
+{
+}
+
+static void psbfb_gamma_get(struct drm_crtc *crtc, u16 *red,
+ u16 *green, u16 *blue, int regno)
+{
+}
+
+static int psbfb_probe(struct drm_fb_helper *helper,
+ struct drm_fb_helper_surface_size *sizes)
+{
+ struct psb_fbdev *psb_fbdev = (struct psb_fbdev *)helper;
+ int new_fb = 0;
+ int ret;
+
+ if (!helper->fb) {
+ ret = psbfb_create(psb_fbdev, sizes);
+ if (ret)
+ return ret;
+ new_fb = 1;
+ }
+ return new_fb;
+}
+
+struct drm_fb_helper_funcs psb_fb_helper_funcs = {
+ .gamma_set = psbfb_gamma_set,
+ .gamma_get = psbfb_gamma_get,
+ .fb_probe = psbfb_probe,
+};
+
+int psb_fbdev_destroy(struct drm_device *dev, struct psb_fbdev *fbdev)
+{
+ struct fb_info *info;
+ struct psb_framebuffer *psbfb = &fbdev->pfb;
+
+ if (fbdev->psb_fb_helper.fbdev) {
+ info = fbdev->psb_fb_helper.fbdev;
+
+ /* If this is our base framebuffer then kill any virtual map
+ for the framebuffer layer and unpin it */
+ if (psbfb->vm_map) {
+ vm_unmap_ram(info->screen_base, psbfb->gtt->npage);
+ psb_gtt_unpin(psbfb->gtt);
+ }
+ unregister_framebuffer(info);
+ if (info->cmap.len)
+ fb_dealloc_cmap(&info->cmap);
+ framebuffer_release(info);
+ }
+ drm_fb_helper_fini(&fbdev->psb_fb_helper);
+ drm_framebuffer_cleanup(&psbfb->base);
+
+ if (psbfb->gtt)
+ drm_gem_object_unreference(&psbfb->gtt->gem);
+ return 0;
+}
+
+int psb_fbdev_init(struct drm_device *dev)
+{
+ struct psb_fbdev *fbdev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ fbdev = kzalloc(sizeof(struct psb_fbdev), GFP_KERNEL);
+ if (!fbdev) {
+ dev_err(dev->dev, "no memory\n");
+ return -ENOMEM;
+ }
+
+ dev_priv->fbdev = fbdev;
+ fbdev->psb_fb_helper.funcs = &psb_fb_helper_funcs;
+
+ drm_fb_helper_init(dev, &fbdev->psb_fb_helper, dev_priv->ops->crtcs,
+ INTELFB_CONN_LIMIT);
+
+ drm_fb_helper_single_add_all_connectors(&fbdev->psb_fb_helper);
+ drm_fb_helper_initial_config(&fbdev->psb_fb_helper, 32);
+ return 0;
+}
+
+void psb_fbdev_fini(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+
+ if (!dev_priv->fbdev)
+ return;
+
+ psb_fbdev_destroy(dev, dev_priv->fbdev);
+ kfree(dev_priv->fbdev);
+ dev_priv->fbdev = NULL;
+}
+
+static void psbfb_output_poll_changed(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_fbdev *fbdev = (struct psb_fbdev *)dev_priv->fbdev;
+ drm_fb_helper_hotplug_event(&fbdev->psb_fb_helper);
+}
+
+/**
+ * psb_user_framebuffer_create_handle - add hamdle to a framebuffer
+ * @fb: framebuffer
+ * @file_priv: our DRM file
+ * @handle: returned handle
+ *
+ * Our framebuffer object is a GTT range which also contains a GEM
+ * object. We need to turn it into a handle for userspace. GEM will do
+ * the work for us
+ */
+static int psb_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+ struct drm_file *file_priv,
+ unsigned int *handle)
+{
+ struct psb_framebuffer *psbfb = to_psb_fb(fb);
+ struct gtt_range *r = psbfb->gtt;
+ return drm_gem_handle_create(file_priv, &r->gem, handle);
+}
+
+/**
+ * psb_user_framebuffer_destroy - destruct user created fb
+ * @fb: framebuffer
+ *
+ * User framebuffers are backed by GEM objects so all we have to do is
+ * clean up a bit and drop the reference, GEM will handle the fallout
+ */
+static void psb_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+ struct psb_framebuffer *psbfb = to_psb_fb(fb);
+ struct gtt_range *r = psbfb->gtt;
+ struct drm_device *dev = fb->dev;
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_fbdev *fbdev = dev_priv->fbdev;
+ struct drm_crtc *crtc;
+ int reset = 0;
+
+ /* Should never get stolen memory for a user fb */
+ WARN_ON(r->stolen);
+
+ /* Check if we are erroneously live */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+ if (crtc->fb == fb)
+ reset = 1;
+
+ if (reset)
+ /*
+ * Now force a sane response before we permit the DRM CRTC
+ * layer to do stupid things like blank the display. Instead
+ * we reset this framebuffer as if the user had forced a reset.
+ * We must do this before the cleanup so that the DRM layer
+ * doesn't get a chance to stick its oar in where it isn't
+ * wanted.
+ */
+ drm_fb_helper_restore_fbdev_mode(&fbdev->psb_fb_helper);
+
+ /* Let DRM do its clean up */
+ drm_framebuffer_cleanup(fb);
+ /* We are no longer using the resource in GEM */
+ drm_gem_object_unreference_unlocked(&r->gem);
+ kfree(fb);
+}
+
+static const struct drm_mode_config_funcs psb_mode_funcs = {
+ .fb_create = psb_user_framebuffer_create,
+ .output_poll_changed = psbfb_output_poll_changed,
+};
+
+static int psb_create_backlight_property(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct drm_property *backlight;
+
+ if (dev_priv->backlight_property)
+ return 0;
+
+ backlight = drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "backlight", 2);
+ backlight->values[0] = 0;
+ backlight->values[1] = 100;
+
+ dev_priv->backlight_property = backlight;
+
+ return 0;
+}
+
+static void psb_setup_outputs(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct drm_connector *connector;
+
+ drm_mode_create_scaling_mode_property(dev);
+ psb_create_backlight_property(dev);
+
+ dev_priv->ops->output_init(dev);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list,
+ head) {
+ struct psb_intel_output *psb_intel_output =
+ to_psb_intel_output(connector);
+ struct drm_encoder *encoder = &psb_intel_output->enc;
+ int crtc_mask = 0, clone_mask = 0;
+
+ /* valid crtcs */
+ switch (psb_intel_output->type) {
+ case INTEL_OUTPUT_ANALOG:
+ crtc_mask = (1 << 0);
+ clone_mask = (1 << INTEL_OUTPUT_ANALOG);
+ break;
+ case INTEL_OUTPUT_SDVO:
+ crtc_mask = ((1 << 0) | (1 << 1));
+ clone_mask = (1 << INTEL_OUTPUT_SDVO);
+ break;
+ case INTEL_OUTPUT_LVDS:
+ if (IS_MRST(dev))
+ crtc_mask = (1 << 0);
+ else
+ crtc_mask = (1 << 1);
+ clone_mask = (1 << INTEL_OUTPUT_LVDS);
+ break;
+ case INTEL_OUTPUT_MIPI:
+ crtc_mask = (1 << 0);
+ clone_mask = (1 << INTEL_OUTPUT_MIPI);
+ break;
+ case INTEL_OUTPUT_MIPI2:
+ crtc_mask = (1 << 2);
+ clone_mask = (1 << INTEL_OUTPUT_MIPI2);
+ break;
+ case INTEL_OUTPUT_HDMI:
+ if (IS_MFLD(dev))
+ crtc_mask = (1 << 1);
+ else
+ crtc_mask = (1 << 0);
+ clone_mask = (1 << INTEL_OUTPUT_HDMI);
+ break;
+ }
+ encoder->possible_crtcs = crtc_mask;
+ encoder->possible_clones =
+ psb_intel_connector_clones(dev, clone_mask);
+ }
+}
+
+void psb_modeset_init(struct drm_device *dev)
+{
+ struct drm_psb_private *dev_priv = dev->dev_private;
+ struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
+ int i;
+
+ drm_mode_config_init(dev);
+
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+
+ dev->mode_config.funcs = (void *) &psb_mode_funcs;
+
+ /* set memory base */
+ /* MRST and PSB should use BAR 2*/
+ pci_read_config_dword(dev->pdev, PSB_BSM, (u32 *)
+ &(dev->mode_config.fb_base));
+
+ /* num pipes is 2 for PSB but 1 for Mrst */
+ for (i = 0; i < dev_priv->num_pipe; i++)
+ psb_intel_crtc_init(dev, i, mode_dev);
+
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+
+ psb_setup_outputs(dev);
+}
+
+void psb_modeset_cleanup(struct drm_device *dev)
+{
+ mutex_lock(&dev->struct_mutex);
+
+ drm_kms_helper_poll_fini(dev);
+ psb_fbdev_fini(dev);
+ drm_mode_config_cleanup(dev);
+
+ mutex_unlock(&dev->struct_mutex);
+}
diff --git a/drivers/gpu/drm/gma500/framebuffer.h b/drivers/gpu/drm/gma500/framebuffer.h
new file mode 100644
index 0000000..d1b2289
--- /dev/null
+++ b/drivers/gpu/drm/gma500/framebuffer.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2008-2011, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ * Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _FRAMEBUFFER_H_
+#define _FRAMEBUFFER_H_
+
+#include <drm/drmP.h>
+#include <drm/drm_fb_helper.h>
+
+#include "psb_drv.h"
+
+struct psb_framebuffer {
+ struct drm_framebuffer base;
+ struct address_space *addr_space;
+ struct fb_info *fbdev;
+ struct gtt_range *gtt;
+ bool vm_map; /* True if we must undo a vm_map_ram */
+};
+
+struct psb_fbdev {
+ struct drm_fb_helper psb_fb_helper;
+ struct psb_framebuffer pfb;
+};
+
+#define to_psb_fb(x) container_of(x, struct psb_framebuffer, base)
+
+extern int psb_intel_connector_clones(struct drm_device *dev, int type_mask);
+
+#endif
+
next prev parent reply other threads:[~2011-11-03 18:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-03 18:20 [PATCH 01/12] gma500: Move the basic driver out of staging Alan Cox
2011-11-03 18:20 ` [PATCH 02/12] gma500: GEM and GEM glue Alan Cox
2011-11-03 19:27 ` Daniel Vetter
2011-11-03 18:21 ` [PATCH 03/12] gma500: introduce the GTT and MMU handling logic Alan Cox
2011-11-03 20:12 ` Daniel Vetter
2011-11-03 22:25 ` Alan Cox
2011-11-03 22:32 ` Daniel Vetter
2011-11-03 18:21 ` Alan Cox [this message]
2011-11-03 18:21 ` [PATCH 05/12] gma500: Add device framework Alan Cox
2011-11-03 18:21 ` [PATCH 06/12] gma500: Add the glue to the various BIOS and firmware interfaces Alan Cox
2011-11-03 18:21 ` [PATCH 07/12] gma500: Add the i2c bus support Alan Cox
2011-11-03 18:22 ` [PATCH 08/12] gma500: Add the core DRM files and headers Alan Cox
2011-11-16 12:04 ` Dave Airlie
2011-11-16 14:47 ` Alan Cox
2011-11-03 18:22 ` [PATCH 09/12] gma500: Add Poulsbo support Alan Cox
2011-11-03 18:22 ` [PATCH 10/12] gma500: Add Oaktrail support Alan Cox
2011-11-03 18:22 ` [PATCH 11/12] gma500: Add support for Cedarview Alan Cox
2011-11-03 18:22 ` [PATCH 12/12] gma500: Now connect up to the DRM build to finish the job Alan Cox
2011-11-03 20:18 ` [PATCH 01/12] gma500: Move the basic driver out of staging Thomas Hellstrom
2011-11-03 22:27 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111103182120.29503.78911.stgit@bob.linux.org.uk \
--to=alan@lxorguk.ukuu.org.uk \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.